ページ1に含まれる内容の要旨
PORTABLE
COMPACT DISC / MP3 PLAYER
WITH ANTI-SHOCK 120SEC.
INSTRUCTION MANUAL
PLEASE READ CAREFULLY BEFORE USING YOUR UNIT
MODEL: JX-CD910
ページ2に含まれる内容の要旨
LOCATION OF CONTROLS CD MODE BUTTON ESP/DIR NEXT CD SKIP ( ) BUTTON PROGRAM BUTTON DC IN 4.5V LCD (Liquid Crystal Display) ADAPTER JACK (not include) STOP BUTTON (power off) PLAY/PAUSE HOLD (power on) SWITCH BATTERY DOOR LINE OUT JACK PHONES JACK DOOR OPEN VOLUME BASS BOOST CONTROL SWITCH CONTROL OPERATION AND FUNCTION POWER SUPPLY Your CD player requires 2 size “AA” alkaline batteries (not included), or use the AC adapter (not included) AC ADAPTER OPERATION Plug one end of the AC adap
ページ3に含まれる内容の要旨
DO NOT CHARGE CONTINUOUSLY FOR 24 HOURS OR MORE. DOING SO CAN CAUSE THE PERFORMANCE OF THE RECHARGEABLE BATTERIES TO DETERIORATE. NOTE: You may play DISC’S whilst charging the batteries. If the operating time decreases drastically even when the rechargeable nickel-cad- mium batteries are properly recharged, purchase a new set of rechargeable nickel- cadmium batteries. When charging for the first time or after a long time, playing time may be reduced. In this case, charge and discharge the batter
ページ4に含まれる内容の要旨
4. Close the disc compartment, press PLAY/PAUSE button, the disc will begin to spin, the display will indicate “CD 45 sec.”then change to “CD MP3” and “MP3” flash in the display, a while later will play the first song and CD will indicate in the display. 5. Adjust the volume as desired. 6. Set the BASS BOOST function as desired. 7. To stop play temporarily, press the PLAY/PAUSE button. • The elapsed playing time flashes in the display. • Press the PLAY/PAUSE button again to resume. 8. In CD mode
ページ5に含まれる内容の要旨
NOTE: Programming is possible in the STOP mode. 1. Press the PROGRAM button in the STOP MODE. “00P-01” appears in the display. 2. Select the first track to be programmed using or button. 3. Press the PROGRAM button again to enter the track selected in to the memory. 4. Repeat steps 2 to 3 to Program other tracks till you finish. 5. After programming is finished. Press the PLAY/PAUSE button to start play according to your order. 6. The play stops automatically when all programmed tracks have b
ページ6に含まれる内容の要旨
1. Press the CD Mode button till the ‘INTRO’ appear in the display. 2. The first 10 seconds of the tracks will be played once, then stops. 3. To stop the intro play and start the normal play. Press the CD Mode button twice more or press the stop button. Note: If you press the button during playing, it will start the intro play after the songs fin- ished. RANDOM OR SHUFFLE PLAY Plays all the tracks in random order. 1. Press the PLAY/PAUSE button and wait for a while. 2. Press the CD Mode button t
ページ7に含まれる内容の要旨
CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth with a weak solution of soap water, and then wipe clean. HANDLING COMPACT DISCS COMPACT 1. This unit is designed to play compact discs bearing the identification logo to the right. Discs that do not carry this logo may not conform to DIGITAL AUDIO the CD standard and may not play properly. 2. Dirty, scratched or warped discs may cause skipping or noise. Pay attention to the following: H
ページ8に含まれる内容の要旨
TROUBLE SHOOTING GUIDE SYMPTOM CAUSE SOLUTION Dead or weak batteries. Replace both batteries. CD Player will not The AC adapter not Check the AC adapter connection at AC turn on. connected properly. outlet and side of set. Disc inserted incorrectly Re-insert disc with label side facing up. Defective or wrong type Try another audio compact disc. compact disc. Close lid securely (push down left corner Disc will not play. CD door not closed. of door) Take out the CD and leave the CD door Moisture h
