ページ1に含まれる内容の要旨
U E
DV VIDEO CASSETTE RECORDER
DV VIDEOKASSETTENREKORDER
ENREGISTREUR A CASSETTE DIGITAL VIDEO
DV VIDEOREGISTRATORE
DV VIDEO CASSETTE RECORDER
UNIDAD GRABADORA DE VÍDEO DV
INSTRUCTION MANUAL
INSTRUCTION MANUAL
BR-DV3000U BR-DV3000E
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
ISTRUZIONI PER L’USO
MANUAL DE INSTRUCCIONES
OPERATE
OPERATE
EJECT
EJECT
MENIU
MENIU
Mini
A.DUB REC PLAY PAUSE
Mini A.DUB REC PLAY PAUSE
DVCAMNTSC PAL REC INH.
DVCAM NTSC PAL REC INH.
PROFESSIONAL
PROFESSIONAL
CH-1/3 SET
CH-1/3
SET
ページ2に含まれる内容の要旨
U E 1. Read all of these instructions. 2. Save these instructions for later use. Supplement 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. This equipment is in conformity with the provisions and protection requirements of the 5. Do not use attachments not recommended by the appliance manufacturer as
ページ3に含まれる内容の要旨
U E SAFETY PRECAUTIONS SAFETY PRECAUTIONS POWER SYSTEM Warning Notice Connection to the mains supply FOR YOUR SAFETY (Australia) CAUTION ATTENTION This unit operates on voltage of 220 V to RISK OF ELECTRIC SHOCK RISQUE D’ELECTROCUTION 1. Insert this plug only into effectively earthed 240 V AC, 50 Hz/60 Hz. DO NOT OPEN NE PAS OUVRIR three-pin power outlet. 2. If any doubt exists regarding the earthing, ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOC
ページ4に含まれる内容の要旨
TABLE OF CONTENTS INTRODUCTION EDIT Thank you for purchasing our DV MAIN FEATURES Precautions .................................................... 6 Using the unit in an editing system .............. 50 Video Cassette Recorder BR-DV3000. ● DV format Daily maintenance and regular inspection ..... 7 High picture and sound quality by digital tech- Precautions on the use of cleaning tape ........ 8 MENU SCREEN nology. Cassette tape ................................................. 8 Structure of the
ページ5に含まれる内容の要旨
INTRODUCTION Precautions Daily maintenance and regular inspection This unit uses consumables or components that will wear off. If a worn-out or deteriorated component Place of storage and use Maintaining the unit (Please turn off the continues to be used, it may cause the unit to break down. To prevent this, please perform daily mainte- power before performing maintenance Please avoid storing or using this VTR in the fol- nance using the head-cleaning tape. With the head-cleaning tape alone
ページ6に含まれる内容の要旨
INTRODUCTION Precautions on the use of cleaning tape Condensation Please use cleaning tape produced by JVC. Memo: ● When this unit is moved from a cold to a warm ● When condensation occurs, the monitor displays 1. Under low humidity conditions, (10% RH to place abruptly, the vapor in the warm air will come the following warning: Please follow the instructions below when using 30% RH), please perform head cleaning at the cleaning tape. into contact with the head drum or the tape intervals of hal
ページ7に含まれる内容の要旨
NAMES AND FUNCTIONS OF VARIOUS PARTS – Front panel – 2 OPERATE OPERATE EJECT EJECT 1 7 MENIU MENIU Mini REC PLAY Mini A.DUB REC PLAY A.DUB PAUSE PAUSE PAL DVCAM NTSC PAL REC INH. DVCAM NTSC REC INH. PROFESSIONAL PROFESSIONAL CH-1/3 CH-1/3 SET SET MIC REMOTE SEL. INPUT SEL. REW MIC REMOTE SEL. INPUT SEL. REW STOP STOP FF FF SERIAL LINE CH-2/4 SERIAL LINE CH-2/4 9PIN WIRELESS DV Y/C 9PIN WIRELESS DV Y/C BR-DV3000 BR-DV3000 43 6 5 [OPERATE] Operate button/LED [A. DUB] Audio
ページ8に含まれる内容の要旨
NAMES AND FUNCTIONS OF VARIOUS PARTS – Front panel – (continued) % $ ^ 8 9 OPERATE OPERATE EJECT EJECT MENIU MENIU Mini Mini A.DUB REC PLAY PAUSE A.DUB REC PLAY PAUSE 0 DVCAM NTSC PAL REC INH. DVCAM NTSC PAL REC INH. PROFESSIONAL PROFESSIONAL CH-1/3 CH-1/3 SET SET MIC REMOTE SEL. INPUT SEL. REW STOP FF MIC REMOTE SEL. INPUT SEL. REW STOP FF CH-2/4 CH-2/4 SERIAL LINE SERIAL LINE ! 9PIN WIRELESS DV Y/C 9PIN WIRELESS DV Y/C BR-DV3000 BR-DV3000 #@ [REC] Record button/LED [FF] Fast f
ページ9に含まれる内容の要旨
NAMES AND FUNCTIONS OF VARIOUS PARTS – Rear panel – !6 5 DV IN/OUT DV IN/OUT AUDIO VIDEO AUDIO VIDEO Y/C LINE LINE Y/C CH 1/3 CH 2/4 CH 1/3 CH 2/4 9 REMOTE REMOTE DC12V DC12V NTSC/PAL NTSC/PAL 1 0 9PIN SERIAL NTSC PAL 9PIN SERIAL NTSC PAL 87 4 3 2 DC power input terminal (2P) [SERIAL REMOTE] serial remote [VIDEO Y/C IN] Video Y/C input [AUDIO IN] Audio input terminal 1 3 5 9 terminal (mini jack) terminal (4P) (RCA2) This is used for DC12V input. It connects the DC pow
ページ10に含まれる内容の要旨
NAMES AND FUNCTIONS OF VARIOUS PARTS – Wireless remote controller – STILL MODE button SEARCH– / button 4 F. ADV button # 245 • During playback, STILL mode or variable Use this button to select images in the STILL Each time this button is pressed in the STILL speed playback in the forward direction, mode. mode, the image is advanced one frame. When press this button to slow down the playback holding down this button, the image is advanced When the unit is in the STILL mode, pres
ページ11に含まれる内容の要旨
ON-SCREEN DISPLAY – Regarding on-screen display – ON-SCREEN DISPLAY – Status display – Besides E-E images and playback images, the monitor connected to the VIDEO LINE OUT terminal and Y/ Status display: It displays the current settings and operating status. C OUT terminal provides the following on-screen information. 1 Wireless remote controller Display (1/2) menu screen –– –D ISPLAY[ 1/2]––– SP mi n 32K CH–1/2 000 DI PLAY ON Set at ON COUN T ER POS I . L OWER - R DISPLAY or AUTO TIME CODE ON
ページ12に含まれる内容の要旨
ON-SCREEN DISPLAY – Status display – (continued) ON-SCREEN DISPLAY – Event display – Event display : When a specific function is in activation or when the operation status is changed with the remote controller, etc, the events will be displayed at the positions shown below. SP mi n 32K CH–1/2 000 5 Display Contents SP mi n 32K CH–1/2 000 AUDIO OUT The standard level of the LEVEL NORM playback or EE audio level is set to NORMAL or ATT with A BL ANK SEARCH AUDIO OUT the remote controller. B IN
ページ13に含まれる内容の要旨
ON-SCREEN DISPLAY – Alarm display – Alarm display : Alarm messages are displayed as shown below, when an operation Display Contents error has occurred or when the unit is in a poor condition for operation. COPY INHIBIT The user attempts to record signals protected with the copy guard. E.g., dirty head. REC INHIBIT The user attempts to record on a write protected cassette tape. (The rear slide is pushed to SAVE.) SP mi n 32K CH–1/2 000 A. DUB INHIBIT The user attempts to perform audio dubbing o
ページ14に含まれる内容の要旨
PREPARATION – Provided wireless remote controller – LOADING THE BATTERIES USING THE WIRELESS REMOTE CONTROLLER Before using the wireless remote controller, please load 2 batteries (AA) in. OPERATE EJECT MENIU Before using the wireless remote controller, Mini A.DUB REC PLAY PAUSE please set the REMOTE SEL. switch to 1 2 3 DVCAM NTSC PAL REC INH. Lift up the cover Load in 2 batteries Close the cover. PROFESSIONAL “WIRELESS”. CH-1/3 SET of the battery (AA). MIC REMOTE SEL. INPUT SEL. REW STO
ページ15に含まれる内容の要旨
PREPARATION – Power – Connecting to the AC adapter Switching on the power Connect the provided AC adapter to the main unit. OPERATE indicator When the unit is in the OPERATE OFF OPERATE mode (the OPERATE indicator lights Screw up red), press the OPERATE button on DV IN/OUT Provided AC adapter Clamp the unit or the remote controller. AUDIO VIDEO AC Mini A.DUB REC PLAY LINE Y/C CH 1/3 CH 2/4 DVCAM NTSC PAL REC INH. • The power is turned on and the OPERATE in- PROFESSIONAL CH-1/3 REMOTE D
ページ16に含まれる内容の要旨
PREPARATION – Selecting the NTSC/PAL signal system – PREPARATION – OPERATION LOCK mode – This unit supports both the NTSC and PAL signal system. This unit comes with an operation lock function to prevent unintended, erroneous operation. Before inputting analogue signals (composite or YC separate video signals), please select the In the OPERATE LOCK mode, the buttons on the main unit and the slide switch are invalid. However, OPERATE ON and MENU operations are still possible. sign
ページ17に含まれる内容の要旨
PREPARATION – Loading/ejecting cassettes – PREPARATION – Setting/displaying date and time – Please use standard DV cassettes or mini DV cassettes. This function sets up the date and time data of the built-in clock. With the built-in chargeable battery, the configured date and time data is maintained even after the main power is turned Guide off. The data will be displayed on the monitor according to the menu setting. During tape recording, the time and date data is registered. 2.
ページ18に含まれる内容の要旨
PREPARATION – Setting/displaying date and time – (continued) 3. – 13, 4. 3.–13, 4. SELECTING DATE/TIME DISPLAY PLAY button button The date and time data is displayed on the monitor screen connected to the VIDEO LINE OUT EJECT DISPLAY terminal and Y/C OUT terminal. Setup can be performed via the DISPLAY (1/2) menu to turn 3. – 4, 4. 5. MENU 5. EJECT button STILL BARS MODE BLANK SET button MENIU on/off the date & time display and via the DISPLAY (2/2) menu to determine the display style. button
ページ19に含まれる内容の要旨
RECORDING – Connection and setting – This chapter explains the connection, setting and operation methods required to use this unit Setting as a recorder. This unit cannot be used as an editing system recorder. NTSC indicator PAL indicator Rear panel OPERATE EJECT Connection MENIU When connected to a video device equipped with a DV terminal DIO VIDEO Mini A.DUB REC PLAY PAUSE Y/C CH 2/4 LINE DVCAM NTSC PAL REC INH. Images can be recorded with almost no deterioration of image quality. PROFESSI
ページ20に含まれる内容の要旨
RECORDING – Setting time codes – 1. Display the TOP MENU. Time code recording TOP MENU –––MENU––– Remote controller Main unit This unit has a built-in time code reader/ generator. It records time codes during recording. It SYSTEM . . REMOT E . . does not record the user’s bit. AUD I O / V I DEO . . Press the MENU button. Press the EJECT button for at TIME CODE . . Time codes are recorded according to the recording condition as follows: least 2 seconds. DI SPLAY SET . . CLOCK AD J UST . . Time
