ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
IMPORTANT NOTES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
ページ3に含まれる内容の要旨
COPYRIGHT/TRADEMARKS ® ® Microsoft , WMA™ and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States ® ® and/or other countries. Mac and the Mac logo are trademarks of Apple Computer, Inc. registered in the United States and/or other ® countries. Pentium is a registered trademark of Intel in the United States and/or other countries. All other product names may be trademarks of the companies with which they are associated. SYSTEM REQUIREMENT
ページ4に含まれる内容の要旨
Thank you......... for purchasing this Emerson Personal MP3/WMA™ Player. This MP3/WMA™ player offers easy to use plug & play features and has enough memory so you can listen to hours of your favorite songs. Also, you can use the player as a storage device for your computer. Please read the instruction manual completely and carefully to make sure you understand the proper operation of this product. This will enable you to get the maximum enjoyment out of all the features within this state-o
ページ5に含まれる内容の要旨
PREPARATION FOR USE POWER SOURCES This player is designed to operate on one alkaline “AAA” batteries, not included. Attempting to operate this unit on any other power source may cause damage to the unit and such damage is not covered by your warranty. INSTALLING THE BATTERIES The battery compartment is located on the top of the cabinet. 1.) Slide the battery compartment cover outward, and then up. 2.) Insert one fresh “AAA” alkaline battery in the battery compartment. Be sure to follow the p
ページ6に含まれる内容の要旨
LOCATION OF CONTROLS 1 1 6 2 3 4 1 4 5 6 13 1 7 7 8 12 9 1 1 1 0 1 5 1.) Battery Compartment 10.) STOP Button 2.) MODE Button 11.) REPEAT Button 3.) PLAY/PAUSE Button 12.) EQ Button 4.) REC (RECORD) Button 13.) LCD Display 5.) HOLD Switch 14.) MIC 6.) VOLUME + Button 15.) Mini USB jack 7.) VOLUME - Button 16.) Headphone jack 8.) FWD SKIP/SEARCH Button 17.) SD/MMC Ram Card Slot 9.) REV SKIP/SEARCH Button 6
ページ7に含まれる内容の要旨
MULTIFUNCTION LCD DISPLAY 1.) Music Mode Indicator 8.) Volume Indicator 2.) Repeat One Indicator 9.) Elapsed Time Indicator 3.) Repeat All Indicator 10.) Preset EQ [ Nor. (Normal)/ 4.) Battery Indicator Class (Classic)/Jazz/Pop/ 5.) Current/Total Song Indicator Rock ] Indicator 6.) Song Information 11.) Play Indicator 7.) Bitrate Information 7
ページ8に含まれる内容の要旨
HOLD SWITCH The HOLD switch locks all of the other controls buttons. If you are carrying the player in a backpack, handbag, gym bag, etc, set the HOLD switch to the ‘On’ position to prevent it from turning ‘On’ accidentally by something pressing against the PLAY/PAUSE button. Likewise, once you start listening to the player you can set the HOLD switch to the ‘On’ position to prevent you from accidentally pressing the PLAY/PAUSE button again or the or buttons while you are carrying or
ページ9に含まれる内容の要旨
INTERNAL AND EXTERNAL MEMORY • Your player will have slightly less memory available than stated due to the necessary memory needed for it’s firmware. • In addition to the built-in memory, you can install a SD®/MMC card. Your player supports up to 512MB SD®/MMC cards. • NOTE: Both the internal and external memory will be shown as a “Removable Disk” with consecutive drive letters. The first drive listed as “Removable Disk” represents the internal memory; the second “Removable Disk” represents
ページ10に含まれる内容の要旨
CONNECT THE PLAYER TO YOUR COMPUTER 1.) Slide the HOLD switch to the off position. 2.) Plug the USB cord into the player. Plug the other end of the USB cord into an open USB port in computer. ������ � �� � � ��� � � ����� �� � ��� ����� �� � � ����� �� � 10
ページ11に含まれる内容の要旨
TRANSFERRING MUSIC AND DATA FILES 1.) Confirm player is connected to computer. 2.) On your Desktop, double-click the “My Computer” icon. 3.) Drag and drop files onto the MP200 drive (“Removable Disk”). • NOTE: The player stores all types of formatted files. However, it will only play MP3/WMA™ formatted files. • NOTE: The first drive listed as “Removable Disk” represents the internal memory; the second “Removable Disk” represents the optional external memory. • NOTE: If you are using Windows® 98SE
ページ12に含まれる内容の要旨
OPERATION 1.) Unplug player from the USB cord. Make sure you have at least one MP3/WMA™ file already stored on the player. 2.) Make sure the HOLD switch is in the off position. 3.) Connect the earbuds to the headphone jack. 4.) Press and hold the PLAY/PAUSE button until the player’s display comes ‘on’. 5.) Press the PLAY/PAUSE button to begin playing an audio track. 6.) Adjust volume to the desired level. 12
ページ13に含まれる内容の要旨
LIST OF BASIC OPERATIONS Power on the unit: Press and hold the PLAY/PAUSE button for approximately 2 seconds. To play track: Press the PLAY/PAUSE button. To select a different track: Press the FWD or REV buttons. To search through a track: Press and hold the FWD or REV buttons. To momentarily pause track: Press the PLAY/PAUSE button when track is playing. PAUSE indication will appear. To resume track: Press the PLAY/PAUSE button when track is paused. To adjust volume: Press the “+
ページ14に含まれる内容の要旨
REPEAT MODES • Each time the REPEAT button is pressed, the play mode will change from: repeat one track , repeat all tracks , random repeat , and no repeat. • The FWD and REV buttons will not select tracks in random during random play. 14
ページ15に含まれる内容の要旨
DELETE A MUSIC OR DATA FILE 1.) Confirm player is powered up and connected to computer. 2.) On your Desktop, double-click the “My Computer” icon. 3.) Select the desired files to delete. • NOTE: The first drive listed as “Removable Disk” represents the internal memory; the second “Removable Disk” represents the optional external memory. 4.) Press the “Delete” key on your computer’s keyboard. �� � �� ����� ���� � ����������� � �� ����� ���� � 15
ページ16に含まれる内容の要旨
DELETE A TRACK DIRECTLY FROM PLAYER • Make sure your player is disconnected from your computer. • Press the FWD or REV buttons to select a track. 1.) Press the REPEAT button and the EQ button together. 2.) Press the FWD /REV buttons to highlight “Yes” or “No”. 3.) Press the MODE button to confirm your choice. � � �������������� ��� � �������� ���� 16
ページ17に含まれる内容の要旨
VOICE RECORDING 1.) Press the MODE button to toggle to the Voice Record mode. indicator appears on display. 2.) Press the REC button and speak into the built-in mic. Speak approximately 1 foot away from the built-in mic for best results. • Press the REC button again to pause recording. Press the REC button again to resume recording. 3.) Press the STOP button to stop recording. • You can store up to 999 voice recordings, depending on the amount of available internal memory. You can
ページ18に含まれる内容の要旨
SETTINGS MODE • Follow the diagram below to: change display contrast, change LCD display color, change backlight settings, change auto power off settings, show player info, format internal and external memory, and restore defaults. � � ������������� � � ����� ���������� � � � ����� �������� � � � ����� ������� � � � ����� ����� � � ���� � �������� ���������� �� ����� ���������� ������������������� ����� ���������� � ��������� ���� CHANGE THE DISPLAY CONTRAST 1.) While the player is stopped, p
ページ19に含まれる内容の要旨
CHANGE THE DISPLAY COLOR You can select a different color for the Music mode, Voice Record mode and Settings mode. 1.) While the player is stopped, press and hold the MODE button for 2 seconds to enter the Settings mode. 2.) Press the FWD or REV buttons to highlight “LCD Color”. 3.) Press the MODE button to select “LCD Color” and display the list of modes. “Music Mode”, “Record Mode”, “Set up Mode”, “Back Menu”. 4.) Press the FWD or REV buttons to select between: “Yellow”, “Green”, “Ora
ページ20に含まれる内容の要旨
CHANGE THE BACKLIGHT SETTING You can choose to have the backlight automatically turn off after a period of time, or to remain off. 1.) While the player is stopped, press and hold the MODE button for 2 seconds to enter the Setting mode. 2.) Press the FWD or REV buttons to highlight “Backlight”. 3.) Press the MODE button to select “Backlight” and display the list of settings. 4.) Press the FWD or REV buttons to select: “Off”, “After 5 secs”, “After 10 secs”, or “After 30 secs”. 5.) Press th
