ページ1に含まれる内容の要旨
4-114-914-11 (1)
Before operation
Digital Photo Basic operations
Frame
Advanced operations
DPF-D70/D80/D100
Connecting to a computer
Error messages
Troubleshooting
Additional information
Operating Instructions
Before operating this unit, please read this manual thoroughly and
retain it for future reference.
Owner’s Record
The model and serial numbers are located at the back or
bottom.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your Sony
ページ2に含まれる内容の要旨
Regulatory Information WARNING Declaration of Conformity To reduce fire or shock hazard, do not Trade Name: SONY expose the unit to rain or moisture. Model No.: DPF-D70 Responsible Party: Sony Electronics Inc. Do not expose the batteries to Address: 16530 Via Esprillo, San Diego, excessive heat such as sunshine, fire CA 92127 U.S.A. or the like. Telephone No.: 858-942-2230 This device complies with part 15 of the FCC CAUTION Rules. Operation is subject to the following two conditions: Repl
ページ3に含まれる内容の要旨
Note: Disposal of Old Electrical & This equipment has been tested and found to comply Electronic Equipment (Applicable in with the limits for a Class B digital device, pursuant the European Union and other to Part 15 of the FCC Rules. European countries with separate These limits are designed to provide reasonable collection systems) protection against harmful interference in a This symbol on the product residential installation. This equipment generates, or on its packaging indicates
ページ4に含まれる内容の要旨
Notice for the customers in the Notes on LCD screen countries applying EU Directives � The displayed image on the screen is not identical in picture quality and colors with the printed image The manufacturer of this product is Sony because phosphor methods or profiles differ. Please Corporation, 1-7-1 Konan Minato-ku Tokyo, 108- regard the displayed image as just a reference. 0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, � Do not press agains
ページ5に含まれる内容の要旨
Notice for users Program © 2008 Sony Corporation Documentation © 2008 Sony Corporation All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS M
ページ6に含まれる内容の要旨
Changing the various settings ......29 Table of Contents Setting procedure ...........................29 Items to set .....................................30 Before operation Connecting to a computer Enjoy your photo frame in various ways ...............................................7 Connecting to a computer ............33 Features ..........................................8 System requirements ......................33 Checking included items .................9 Connecting to a computer to ex
ページ7に含まれる内容の要旨
Before operation Before operation Enjoy your photo frame in various ways Easy display of images in a memory card Various display functions In addition to slideshows, you can enjoy various display modes easily including the single image, index, clock, and calendar modes. (.page 19) Adding important images to an album (saving to the internal memory) Images added to the album are saved in the internal memory. You can also export these images to a memory card. (.page 25) Connecting to your compute
ページ8に含まれる内容の要旨
xExporting images You can export images in the album to your Features memory card. xConnecting to a computer to The Sony DPF-D70/D80/D100 is a digital exchange the images photo frame for easily displaying images taken * We do not guarantee proper operations for all types with a digital camera or other device without of devices. using a computer. xSupport for various memory cards* Supports various memory cards used by digital cameras and other devices, such as a “Memory Stick”, CompactFla
ページ9に含まれる内容の要旨
Before operation Checking included Identifying the parts items For details, see the pages indicated in the parentheses. Make sure that the following items are The illustrations are of the DPF-D70. The included. locations and names of buttons and connectors � Digital photo frame (1) of the DPF-D80/D100 are identical to those of � Remote control (1) the DPF-D70, although the LCD screen size is �AC adaptor (1) different. � Operating Instructions (this manual) (1) � Warranty (1) Front (In som
ページ10に含まれる内容の要旨
Rear A USB miniB connector D VIEW MODE button (.page 33) E Access lamp Connect a USB cable when you want to use the photo frame with a computer. F “Memory Stick PRO” (Standard/ Duo) slot (.page 17) B DC IN 12 V jack (.page 13) Insert the plug of the supplied AC adaptor to G CompactFlash card/Microdrive this jack, and connect to the wall outlet. slot (.page 17) C Stand (.page 14) H 1 (on/standby) button/(standby) indicator I MENU button Displays the menu. The function such as [Slideshow], [Ro
ページ11に含まれる内容の要旨
Before operation Remote control A VIEW MODE button B (clock) button (.page 22) C (slideshow) button (.page 20) D MENU button E BACK button F 1 (on/standby) button G (add to album) button (.page 25) H (zoom in)/ (zoom out) buttons (.page 24) I (index) button (.page 22) This button switches from the image preview screen to index view screen. J Direction (B/b/v/V) buttons K (enter) button L (rotation) button (.page 24) GB 11
ページ12に含まれる内容の要旨
Basic operations Replacing the battery of the Preparing the remote remote control If the remote control stops working, replace the control battery (CR2025 lithium battery) with a new one. The supplied lithium battery (CR2025) has already been inserted into the remote control. 1 Pull out the battery holder. Pull out the protective sheet before use as While pressing in the tab of the battery shown in the figure. holder, pull out the battery holder. Protective sheet Using the remote control
ページ13に含まれる内容の要旨
Basic operations � Using a battery other than the specified one may result in the battery rupturing. Connecting to the AC � Dispose of used batteries as specified by the local authorities. power source � Do not leave the remote control in a very hot and humid place. � Take care that no foreign objects enter inside the 1 Insert the plug of the AC adaptor remote control when you, for example, replace the into the DC IN 12 V jack on the rear battery. of the photo frame. � Incorrect use of th
ページ14に含まれる内容の要旨
� After use, remove the AC adaptor from the DC IN 12 V jack of the photo frame, and remove Setting the stand the AC adaptor from the outlet. � This power unit is intended to be correctly orientated in a vertical or floor mount position. Opening the stand Set the photo frame with opening the stand as below. Setting to portrait or landscape orientation You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand. GB 14
ページ15に含まれる内容の要旨
Basic operations When the photo frame is placed in the portrait orientation, the image is also automatically Turning the photo frame rotated to its proper orientation. on Turning on the power Press 1 (on/standby) on the photo frame or remote control to turn on the power, and the standby indicator turns into green from red. Notes � Close the stand when you carry the photo frame. � Check whether the stand is stable. If the stand is not set properly, the photo frame may fall over. � When the
ページ16に含まれる内容の要旨
Operations in an initial state When the photo frame is turned on without a Setting the clock memory card connected, the initial display below appears on the screen. The clock of the photo frame needs to be adjusted in order to display an accurate time in the clock and calendar view modes. 1 Press MENU on the remote control. The menu screen is displayed. 2 Press v/V to select [Various settings] and then press to display the Various settings screen. When the photo frame is not operated for 1
ページ17に含まれる内容の要旨
Basic operations Set the time in the order of hour, minute, and second. Inserting a memory card 7 Set the day to start the week for the and viewing images calendar. You can set the day that appears on the This section describes inserting a memory card very left when the calendar is displayed. and general operations for displaying images in 1Press v/V to select [First Weekday] and a slideshow. then press . 2Press v/V to select [Sunday] or Inserting a memory card [Monday] and then press .
ページ18に含まれる内容の要旨
Notes � When inserting the memory card, it will only insert the portion of the way, so do not try to force it as this could damage the memory card and/or photo frame. � This photo frame has “Memory Stick” standard and Duo size compatible slot, so you do not need a Memory Stick adaptor. � The SD memory card/xD-Picture Card dual- purpose slot automatically detects the card type. � Before using a memory card, see “About the memory cards” on page 41. Display priority of images If a memory card
ページ19に含まれる内容の要旨
Basic operations Displaying images x Overview of display You can press the buttons on the remote control Clock display to switch the display.* (page 22) Slideshow display (page 20) Single image display Index image display (page 21) (page 22) Tips* � If the power is on and no memory card is inserted, the images in internal memory are displayed. If no images are saved to internal memory, demonstration mode starts automatically. Demonstration mode ends, if a memory card is inserted. � The disp
ページ20に含まれる内容の要旨
Multiple image mode x Slideshow display Displays multiple images at same time. Images in a memory card are automatically displayed one after another. Tip For details on playback order, see page 30. To start the slideshow � To start a slideshow from single image, clock, or index image display, press (slideshow). Clock view mode Tip Displays images with shooting date and time. To perform this operation from the photo frame, press ENTER on the single image display mode. Note There are several
