ページ1に含まれる内容の要旨
E:\DATA\4192726121\4192726121SMPN100U2\00COV- master page=Right
SMPN100U2\010COV.fm
4-192-726-12(1)
Network Media
Player
The software of this player may be updated in the future. To find out details on any
available updates, please visit: http://esupport.sony.com/
Operating Instructions
SMP-N100
4-192-726-12(1)
Printed in Malaysia © 2010 Sony Corporation
SMP-N100
4-192-726-12(1)
ページ2に含まれる内容の要旨
Precautions b This equipment has been tested � The nameplate is located on the WARNING bottom of the unit. and found to comply with the � To prevent fire or shock hazard, limits for a Class B digital do not place objects filled with To reduce the risk of fire or electric device, pursuant to Part 15 of the liquids, such as vases, on the shock, do not expose this apparatus FCC Rules. These limits are apparatus. to rain or moisture. designed to provide reasonable � Install this unit so t
ページ3に含まれる内容の要旨
FCC Radiation Exposure On power sources Statement: � The player is not disconnected Precautions This equipment complies with from the AC power source as FCC radiation exposure limits long as it is connected to the set forth for uncontrolled On placement wall outlet, even if the player equipment and meets the FCC � Place the player in a location itself has been turned off. radio frequency (RF) Exposure with adequate ventilation to � Disconnect the player from the Guidelines in Supplement C
ページ4に含まれる内容の要旨
11)Only use attachments/ On cleaning accessories specified by the Clean the cabinet, panel, and IMPORTANT NOTICE manufacturer. controls with a soft cloth. Do not 12)Use only with the cart, stand, Caution: This player is use any type of abrasive pad, tripod, bracket, or table capable of holding a still scouring powder or solvent such specified by the manufacturer, video image or on-screen as alcohol or benzine. or sold with the apparatus. display image on your When a cart is used, us
ページ5に含まれる内容の要旨
Table of Contents WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hookups and Settings Step 1: Preparing the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Step 2: Connect
ページ6に含まれる内容の要旨
Guide to Parts and Controls Front panel A Power indicator D (USB) jack Lights up when the player is turned on. Connect a USB device to this jack. B Remote sensor E [/1 (on/standby) Turns on the player, or sets to standby C WLAN indicator mode. Lights up when using a wireless LAN. Rear panel A LINE OUT (R-AUDIO-L) jacks E HDMI OUT jack B LINE OUT (VIDEO) jack F COMPONENT VIDEO OUT (Y, PB, PR) jacks C DC IN 12V (AC adapter input) jack G LAN (100) terminal D DIGITAL OUT (OPTICAL) jack 6
ページ7に含まれる内容の要旨
A -TV- WIDE Remote Changes the screen format. -TV- INPUT The available functions of the remote differ Switches between TV and other input depending on the file or the situation. sources. -TV- [/1 (on/standby) Turns on the TV, or sets to standby mode. [/1 (on/standby) Turns on the player, or sets to standby mode. B Number buttons (0 - 9) Enters the title/chapter numbers, etc. VOL +/– Adjusts the TV volume. MUTING Mutes the sound. AUDIO Selects the language track when multi- lingual tracks are
ページ8に含まれる内容の要旨
Item Category Skips to the previous/next chapter, track, or file. REPLAY/ADVANCE Depending on the contents, these buttons may not function. m/M (fast reverse/fast forward) � Fast reverses/fast forwards when pressed during playback. Each time
ページ9に含まれる内容の要旨
Hookups and Settings Step 1: Preparing the Player Checking the supplied accessories Check that you have the following items: � Audio/video cable (phono plug ×3) (1) � AC power cord (1) � AC adapter (1) � Remote control (remote) (1) � Size AA (R6) batteries (2) Preparing the remote Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment. Hookups and Settings 9
ページ10に含まれる内容の要旨
Step 2: Connecting the Player Do not connect the AC power cord until you have made all the connections. Connecting to your TV Select one of the following connection methods according to the input jacks on your TV. Match the color of the plug to that of the jack when connecting. High quality HDMI cable (not supplied) Audio/video cable (supplied) Component video cable (not supplied) Audio/video cable (supplied) Standard quality b Do not connect the player through a VCR. Video signals fed through
ページ11に含まれる内容の要旨
Hookups and Settings Connecting to your AV amplifier (receiver) Select one of the following connection methods according to the input jacks on your AV amplifier (receiver). When you select B, make the appropriate settings in the “Audio Settings” setup (page 19). HDMI cable (not supplied) HDMI cable (not supplied) Optical digital cable (not supplied) *1 t Set “Dolby Digital ” (page 19) *2 and “DTS ” (page 19). Audio/video cable (supplied) *1 *2 Manufactured under license under U.S. Patent #
ページ12に含まれる内容の要旨
3 Turn on the TV, then switch the input selector on your TV so that the signal Step 3: Easy Setup from the player appears on your TV screen. When turned on for the first time Wait for a short while before the player turns on and starts “Easy Setup.” 1 Connect the supplied AC adapter and AC power cord in the numeric order shown below. When removing them, do so in reverse order. to DC IN 12V 4 Perform “Easy Setup.” Follow the on-screen instructions to make the basic settings using
ページ13に含まれる内容の要旨
Hookups and Settings Connecting to the Network Wired Setup Use a LAN cable to connect to the LAN (100) terminal on the player. LAN cable (not supplied) Broadband ADSL modem/ Internet router Cable modem To set the network settings Select “Network Settings,” “Internet Settings,” then “Wired Setup” (page 21), and follow the on-screen instructions to complete the setup. Wireless Setup Use a wireless LAN that is built into the player. LAN cable (not supplied) Wireless LAN ADSL modem/ Internet
ページ14に含まれる内容の要旨
Playing via a Network Streaming BRAVIA Internet Video BRAVIA Internet Video serves as a gateway delivering the selected Internet content and a variety of on-demand entertainment straight to your player. 1 Prepare for BRAVIA Internet Video. Connect the player to a network (page 13). 2Select (Video), (Music), or (Photo) on the home menu using
ページ15に含まれる内容の要旨
Playback Playing files on a DLNA server Playing from a USB You can play video/music/photo files on your Device home server, such as a DLNA certified PC by connecting the player to the home network. You can play video/music/photo files on the For playable files on a DLNA server, see connected USB device. “Playable types of files” (page 26). For playable USB devices, see “Playable types of files” (page 26). 1 Prepare for playing files on a DLNA server. 1 Connect the USB device to the USB �
ページ16に含まれる内容の要旨
(Music) only Available Options Items Details Add Registers music files in the Various settings and playback operations are Slideshow USB memory as slideshow available by pressing OPTIONS. The BGM background music (BGM). available items differ depending on the situation. (Photo) only Items Details Common options Slideshow Changes the slideshow Items Details Speed speed. Repeat Sets the repeat mode. Slideshow Sets the effect for Setting Effect slideshows. Favorites List Displays the Favorit
ページ17に含まれる内容の要旨
Settings and Adjustments Using the Settings Displays Select (Setup) on the home menu when you need to change the settings of the player. The default settings are underlined. 1 Select (Setup) on the home menu using
ページ18に含まれる内容の要旨
Network Update Screen Settings Select “OK” to update the player’s software TV Type via the network. 16:9 Select this when connecting to a wide-screen TV or a TV z with a wide mode function. � We recommend the network update every 2 4:3 Select this when connecting months or so. to a 4:3 screen TV without a � For information about update functions, visit the wide mode function. following website: http://esupport.sony.com/ Screen Format Original Select this when connecting to a TV with a wi
ページ19に含まれる内容の要旨
Settings and Adjustments z � When connecting the HDMI OUT jack and other Audio Settings video output jacks at the same time, select “Component Video.” � If no picture appears when setting “HDMI” or Audio (HDMI) “Component Video” resolution, try another Auto Normally select this. resolution setting. Outputs audio signals according to the status of the YCbCr/RGB (HDMI) connected HDMI device. Auto Automatically detects the PCM Outputs PCM signals from connected TV type, and the HDMI OUT j
ページ20に含まれる内容の要旨
Downmix Surround Outputs audio signals with Parental Control surround effects. Select this when connecting an audio Settings device that supports Dolby Surround (Pro Logic) or Password DTS Neo:6. Sets or changes the password for the Parental Stereo Outputs audio signals Control function. A password allows you to without surround effects. set a restriction on Internet video playback. Select this when connecting an audio device that does not Parental Control Area Code support Dolby Surro
