ページ1に含まれる内容の要旨
3-300-258-12 (1)
Before operation
Digital Photo Basic operations
Frame
Advanced operations
DPF-D70
Connecting to a computer
Error messages
Troubleshooting
Additional information
Operating Instructions
Before operating this unit, please read this manual thoroughly and
retain it for future reference.
Owner’s Record
The model and serial numbers are located at the rear.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your Sony dealer
regarding t
ページ2に含まれる内容の要旨
Note: WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. To reduce fire or shock hazard, do not These limits are designed to provide reasonable expose the unit to rain or moisture. protection against harmful interference in a residential installation. This equipment generates, Do not expose the batteries to uses, and can radiate radio frequency energy and, if excessive heat such as sunshine, fire
ページ3に含まれる内容の要旨
Disposal of Old Electrical & Notice for the customers in the Electronic Equipment (Applicable in countries applying EU Directives the European Union and other The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108- European countries with separate 0075 Japan. The Authorized Representative for EMC collection systems) and product safety is Sony Deutschland GmbH, This symbol on the product Hedelfinger Strasse 61, 70327 Stuttgart, Germany. or on its packaging
ページ4に含まれる内容の要旨
Notes on LCD screen � The displayed image on the screen is not identical in Notice for users picture quality and colors with the printed image because phosphor methods or profiles differ. Please regard the displayed image as just a reference. Program © 2008 Sony Corporation � Do not press against the LCD screen. The screen Documentation © 2008 Sony Corporation may be discolored and that may cause a malfunction. All rights reserved. This manual or the software � Exposing the LCD screen to di
ページ5に含まれる内容の要旨
Changing the various settings ......26 Table of Contents Setting procedure ........................... 26 Items to set .................................... 27 Before operation Connecting to a computer Enjoy your photo frame in various ways ...............................................6 Connecting to a computer ............29 Features ..........................................7 System requirements ..................... 29 Checking included items .................8 Connecting to a computer to e
ページ6に含まれる内容の要旨
Before operation Enjoy your photo frame in various ways Easy display of images in a memory card Various display functions In addition to slideshows, you can enjoy various display modes easily including the single image, index, clock, and calendar modes. (.page 16) Adding important images to an album (saving to the internal memory) Images added to the album are saved in the internal memory. You can also export these images to a memory card. Connecting to your computer Images can be copied from
ページ7に含まれる内容の要旨
Before operation xExporting images You can export images in the album to your Features memory card. xConnecting to a computer to The Sony DPF-D70 is a digital photo frame for exchange the images easily displaying images taken with a digital camera or other device without using a computer. xSupport for various memory cards Supports various memory cards used by digital cameras and other devices, such as a “Memory Stick”, CompactFlash card, SD memory card, and xD-Picture Card™. Just insert
ページ8に含まれる内容の要旨
Checking included Identifying the parts items For details, see the pages indicated in the parentheses. Make sure that the following items are included. Front � Digital photo frame (1) � Remote control (1) � AC adaptor (1) � Operating Instructions (this manual) (1) � Warranty (1) (In some regions, the warranty is not supplied.) A LCD screen B Remote sensor When using the supplied remote control, point it at this sensor. Rear A USB miniB connector (.page 29) Connect a USB cable when you want
ページ9に含まれる内容の要旨
Before operation Remote control D VIEW MODE button A VIEW MODE button E Access lamp (.page 14) B (clock) button F “Memory Stick PRO” (Standard/ C (slideshow) button Duo) slot (.page 14) D MENU button G CompactFlash card/Microdrive E BACK button slot (.page 14) F 1 (on/standby) button H 1 (on/standby) button/(standby) G (add to album) button indicator H (zoom in)/ (zoom out) buttons I MENU button Displays the menu. I (index) button The function such as [Slideshow], [Rotate], This button switch
ページ10に含まれる内容の要旨
Basic operations Replacing the battery of the Preparing the remote remote control If the remote control stops working, replace the control battery (CR2025 lithium battery) with a new one. The supplied lithium battery (CR2025) has already been inserted into the remote control. 1 Pull out the battery holder. Pull out the protective sheet before use as While pressing in the tab of the battery shown in the figure. holder, pull out the battery holder. Protective sheet Using the remote control
ページ11に含まれる内容の要旨
Basic operations � Using a battery other than the specified one may result in the battery rupturing. Connecting to the AC � Dispose of used batteries as specified by the local authorities. power source � Do not leave the remote control in a very hot and humid place. � Take care that no foreign objects enter inside the 1 Insert the plug of the AC adaptor remote control when you, for example, replace the into the DC IN 12 V jack on the rear battery. of the photo frame. � Incorrect use of th
ページ12に含まれる内容の要旨
� After use, remove the AC adaptor from the DC IN 12 V jack of the photo frame, and remove Setting the stand the AC adaptor from the outlet. � This power unit is intended to be correctly orientated in a vertical or floor mount position. Opening the stand Set the photo frame with opening the stand as below. Setting to portrait or landscape orientation You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand. When the photo frame is placed in
ページ13に含まれる内容の要旨
Basic operations Turning the photo frame Setting the clock on The clock of the photo frame needs to be adjusted in order to display an accurate time in Turning on the power the clock and calendar view modes. Press 1 (on/standby) on the photo frame or When you power on the first time after remote control to turn on the power, and the purchase, demo mode will automatically start. standby indicator turns into green from red. During demo mode, you cannot set up clock. Please insert memory card
ページ14に含まれる内容の要旨
5 Adjust the date. 1Press v/V to select [Date] and then Inserting a memory card press . and viewing images 2Press v/V to select a value and then press . This section describes inserting a memory card 6 Adjust the time. and general operations for displaying images in 1Press v/V to select [Time] and then a slideshow. press . 2Press v/V to select a value and then press . Inserting a memory card Set the time in the order of hour, minute, and second. Insert a memory card firmly into the corr
ページ15に含まれる内容の要旨
Basic operations Notes � When inserting the memory card, it will only insert the portion of the way, so do not try to force it as this could damage the memory card and/or photo frame. � This photo frame has “Memory Stick” standard and Duo size compatible slot, so you do not need a Memory Stick adaptor. � The SD memory card/xD-Picture Card dual- purpose slot automatically detects the card type. � Before using a memory card, see “About the memory cards” on page 36. Display priority of images
ページ16に含まれる内容の要旨
Displaying images x Overview of display You can press the buttons on the remote control Clock display to switch the display.* (page 19) Slideshow display (page 17) Single image display Index image display (page 18) (page 19) Tips* � If the power is on and no memory card is inserted, the images in internal memory are displayed. If no images are saved to internal memory, demonstration mode starts automatically. Demonstration mode ends, if a memory card is inserted. � The display mode stays un
ページ17に含まれる内容の要旨
Basic operations Clock view mode x Slideshow display Displays images with shooting date and time. Images in a memory card are automatically displayed one after another. To start the slideshow � To start a slideshow from single image, clock, or index image display, press (slideshow). Tip To perform this operation from the photo frame, press ENTER on the single image display mode. Calendar view mode There are several slideshow modes. Pressing Displays images one after another while VIEW MOD
ページ18に含まれる内容の要旨
Fit to screen mode x Single image display Displays an image over the whole screen. To display an image you want to display You can switch the images to display by � During a slideshow, press at an image pressing B/b. you want to display. � In the index image display, press B/b/v/V to select an image you want to display and then press . You can also press (zoom in). Tip To perform this operation from the photo frame, press ENTER at an image you want to display during a slideshow. In the i
ページ19に含まれる内容の要旨
Basic operations � Image display order/Total number of images Large thumbnail mode � Image number (folder-file number) Displays a list of large thumbnails (3 rows × 4 This is displayed if the image is DCF columns). compliant. You can select an image by pressing B/b/v/V. � Shooting date � Image details – File format (JPEG, RAW) – Number of pixels (width × height) – Manufacturer name of image input device – Model name of image input device – Shutter speed (e.g.: 1/8) – Aperture value (e.g.: F2.8
ページ20に含まれる内容の要旨
Digital clock mode Displays the date and time on digital clock. Calendar mode Displays a calendar for the current month. You can press v/V to display a calendar for the previous or next month. You can also set the first day of the week for the calendar in the [Date/time settings] menu. Tip There are black and white background types for each of analogue clock, digital clock and calendar mode. GB 20
