ページ1に含まれる内容の要旨
®
Docking Digital HD Radio™ System for iPod and iPhone™
Madefor
Pod
Workswith
iPhone
Owner's Manual
JiMS-525i
(iPod and iPhone Not Included)
Please read and follow this Instruction Manual carefully before
using the unit and retain it for future reference
- 24 -
JENSEN JIMS-525i_Eng ib_Rev.p65 24 5/15/2008, 5:51 PM
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash and CAUTION: TO REDUCE THE RISK OF The exclamation point arrow head within the ELECTRIC SHOCK DO NOT REMOVE within the triangle is a COVER (OR BACK) NO USER triangle is a warn
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 9. Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.Protect the power cord from being walked on or pinched particularly at plugs, con
ページ4に含まれる内容の要旨
TABLE OF CONTENTS WELCOME ........................................................................................................................................................................ 4 PROTECT YOUR FURNITURE ......................................................................................................................................... 4 ABOUT THIS MANUAL ..........................................................................................................................
ページ5に含まれる内容の要旨
WELCOME TM Thank you for purchasing the JENSEN JiMS-525i HD Radio System. Before operating the unit, please read this manual thoroughly and retain it for future reference. PROTECT YOUR FURNITURE!! This system is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polish
ページ6に含まれる内容の要旨
LOCATION OF CONTROLS (Continued) Rear View 3 5 6 1 2 4 7 1. AC INPUT SOCKET 5. AUX LINE-IN Jack 2. AM Antenna Connector 6. HEADPHONE Jack th 3. S-VIDEO Output (5 Gen iPod) 7. RESET Switch 4. FM Antenna Connector Display Unit 1 2 3 4 5 6 7 8 9 10 FM ST PM MHz AM KHz 1. Band/AM-PM Indicator 6. ALARM 2 Indicator 2. iPod Icon 7. SLEEP Indicator TM 3. HD Radio Icon 8. FM STEREO Indicator 4. Time/Frequency Reading 9. Frequency Unit 5. ALARM 1 Indicator 10. RBDS Messages/FUNCTION Indicator - 5 - JENSEN
ページ7に含まれる内容の要旨
LOCATION OF CONTROLS (Continued) Remote Control Section POWER Turn the Radio On/Off BAND Select AM/FM Band FUNCTION Selects Radio, iPod or Aux Modes 0 – 9 Numeric buttons PRESET STATIONS 6 Memory Stations Down PRESET STATIONS 5 Memory Stations Up EQ Equalizer Options MEMORY Program Preset Stations +, – Volume Up and Down ® Play/Pause/ iTunes Tag : Skip Forward/Tuning Up 9 Skip Backward/Tuning Down SNOOZE/LIGHT Silences the Alarm Temporarily/ Switch Backlight On/Off MUTE Mute the System Sound SET
ページ8に含まれる内容の要旨
GETTING STARTED (Continued) TM Connecting FM / HD Radio Receiver Antenna / to a Cable Radio Signal This Radio's FM Antenna Connector is a standard connector that will accept FM / HD RADIO AM RADIO ANTENNA ANTENNA CONNECTOR CONNECTOR either the FM Antenna wire (included) or the cable FM feed from most cable systems that provide FM programming. To connect the included FM Antenna wire, slide the black plastic end of the antenna wire onto the center post of the antenna connector on the back of the
ページ9に含まれる内容の要旨
GETTING STARTED (Continued) Connecting AC Power Supply TM • This JiMS-525i HD Radio System operates from AC120V ~ 60Hz line power supply. • The Remote Control operates on 1 Lithium battery, CR2025 (Included). Insert the AC Cord Inlet into the AC cord socket on back of the Radio and the other end into a standard 120V AC outlet as shown in the diagram below. The Radio will automatically go into standby mode. RESET SWITCH AC Outlet AC Cord Inlet Remark: In the event of a malfunction due to electros
ページ10に含まれる内容の要旨
RADIO OPERATION The following procedures can be accomplished by using either the remote or the controls on the main unit. Listening to the Radio Note: When entering the Radio function mode, the words "PLEASE WAIT TO TURN ON RADIO" will appear first on the bottom row of the Display and then the Band and Frequency Reading will be shown in the Display after one or two seconds. 1. Press the Button to turn on the unit. Radio iPod Aux 2. Press the FUNCTION Button to operate the unit in radio mode
ページ11に含まれる内容の要旨
RADIO OPERATION (Continued) To Preset Channels This Radio is equipped with 10 preset memories for AM and 20 preset memories for FM. Once they are preset, they can be instantly accessed by keying in the preset channel using the Numeric Buttons or pressing the 5 or 6 Buttons on the Remote Control. 1. Press Button to turn on the unit. 2. Press the FUNCTION Button to switch the unit into radio mode. 3. Press the BAND Button to select AM or FM band as desired. 4. Tune to a desired station. 5. Pr
ページ12に含まれる内容の要旨
RADIO OPERATION (Continued) TM Special Information about Delay in the HD Radio System TM Digital systems inherently produce a delay in audio. To overcome such delay, HD Radio broadcasting uses a station's current analog signal to ensure fast tuning of an AM or FM station. After an estimated TM 5 seconds, the audio will change from analog to digital HD Radio broadcasting. TM If the change is smooth, the radio station will implement the HD Radio broadcast correctly. But if the station has no smo
ページ13に含まれる内容の要旨
iTunes Tagging ® Note: iTunes Tagging for iPod - Compatibility with iPod nano (3rd generation), iPod classic and iPod (5th generation). To Store Song Tag(s) 1. In Radio mode, "Tag Available" will appear on the display indicating that a song Tag is available for the song that is currently playing. Briefly press the / Tag Button either on the main unit or on the remote control to capture the song information Tag. Message "Storing Tag .........." will appear in the Display. 2. The Radio will ch
ページ14に含まれる内容の要旨
AUX OPERATION You can play other music sources (iPod shuffle, MP3, CD or other digital audio player) through the speakers of this Radio by connecting the AUX LINE-IN Jack to your external player's audio out jack or headphone jack. 1. Set up the Radio and your external player as described in the section AUX IN Connection. 2. Power up the Radio and the external player. 3. Press the FUNCTION Button to operate the Radio in AUX mode. 4. Start playing your MP3, CD or other digital audio player. 5. Pre
ページ15に含まれる内容の要旨
DOCKING YOUR iPod 1. Press the Button to turn on the unit. 2. Press the FUNCTION Button to select iPod mode. iPod 3. According to TABLE 1, select a suitable adaptor for your iPod and insert it into the docking bay. Your iPod can now be inserted onto the iPod connector by aligning the connector on the bottom of the iPod onto the connector in the docking bay. Note: Please be careful when seating the iPod onto the dock to avoid damaging the 30-pin connector in the iPod or the docking system. 4
ページ16に含まれる内容の要旨
DOCKING YOUR iPhone 1. Press the Button to turn on the unit. 2. Press the FUNCTION Button to select iPod mode. 3. According to TABLE 1, select the 30G adaptor and insert it into the docking area. Your iPhone can now iPhone be inserted into the docking port by aligning the connector on the bottom of the iPhone onto the connector in the docking. Note: Please be careful when seating the iPhone onto the dock to avoid damaging the 30-pin connector in the iPhone or the docking system. 4. Authenti
ページ17に含まれる内容の要旨
CONNECTING THE S-VIDEO (for iPod Video Output) You are able to view videos and photos stored in your 5th generation iPod, iPod classic, 3rd generation IPod nano and iPod touch on a standard TV screen or video display using the S-Video OUT feature of this unit. General Set Up iPod 1. Connect one end of the S-Video cable into the rear S-Video OUT Music Jack on this unit and the other end to the VIDEO IN of your TV or Photos video display. Videos Extras 2. Switch on your TV or video display. Settin
ページ18に含まれる内容の要旨
USING HEADPHONES (NOT INCLUDED) Inserting the plug of your headphones (not included) into the Headphone jack, on the back of the Radio, will enable you to listen in private. When using headphones, the speakers will be disconnected automatically. NOTE: READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES 1. Avoid extended play at very high volume as it may impair your hearing. 2. If you experience ringing in your ears, reduce the volume or shut off your unit. 3. Keep the volume at a reaso
ページ19に含まれる内容の要旨
CLOCK SETTING (Continued) Setting the Alarm (s) i. This Radio allows you to set two different wake-up times which can be used independently or simultaneously AL1 or AL2 or AL1 and AL2. ii. The procedure for setting the alarm time for ALARM 1 and ALARM 2 are the same. iii. The following procedure describes how to set ALARM 1 alarm time: 1. In POWER off mode, press the ALARM 1 Button briefly. The ALARM 1 Alarm Indicator appears. 2. Press and hold the ALARM 1 Button until the wakeup sound sou
ページ20に含まれる内容の要旨
ALARM OPERATION This unit provides wake to HD Radio FM, HD Radio AM, iPod or ALARM. Wake to Radio, iPod or Alarm 1. Refer to "SETTING THE ALARMS" on page 18 to set the desired wake up time (s), wakeup mode, i.e. HD RADIO FM, HD Radio AM, iPod or ALARM and volume level. HD Radio FM HD Radio AM iPod Buzzer 2. When the preset wake up time is reached the selected wakeup mode turns "On". The respective ALARM Indicator flashes. The alarm will continue to sound and last for 60 minutes and then turn off
