ページ1に含まれる内容の要旨
3-858-169-12(1)
CD Radio
Cassette-Corder
Operating Instructions
CFD-222
CFD-DW222
1996 by Sony Corporation
CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92
ページ2に含まれる内容の要旨
Information Warning For customers in the United States To prevent fire or shock hazard, do This equipment has been tested and found to not expose the player to rain or comply with the limits for a Class B digital moisture. device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordan
ページ3に含まれる内容の要旨
Basic Operations Table of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player Additional Information 12 Using the display 18 Precautions 13 Locating a specific point in a 20 Troubleshooting track 22 Maintenance 14 Playing tracks repeatedly 23 Specifications (Repeat Play) Back cover 15 Creating your own program Index (Program Play) Setting Up 16 Choosing the power sources 17 Adjusting the sound emphasis (TONE/MEGA BASS) Introduct
ページ4に含まれる内容の要旨
Basic Operations Playing a CD 1 2,3 4 Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to CD. 2 Press OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment. With the label side up 3 Close the CD compartment. 4 Basic Operations CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 O O P P E E N N / / C C L L O O S S E E
ページ5に含まれる内容の要旨
Basic Operations Display 4 Press ^ . The player plays all the tracks once. Track number Playing time Use these buttons for additional operations VOLUME FUNCTION ^ =/+ OPEN/CLOSE p AMS/SEARCH To Do this Adjust the volume Turn VOLUME. Stop playback Press p. Pause playback Press ^. Press again to resume play after pause. Go to the next track Press + AMS/SEARCH. Go back to the previous track Press =AMS/SEARCH. Remove the CD Press OPEN/CLOSE. Turn off the player Set FUNCTION to TAPE (CD/RADIO OFF).
ページ6に含まれる内容の要旨
Listening to the radio 23 1 Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to RADIO. 2 Set BAND to FM or AM. 3 Turn TUNING to tune in a radio station. If the received FM stereo is too weak, the reception becomes monaural. 6 Basic Operations CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92
ページ7に含まれる内容の要旨
Basic Operations Use these buttons for additional operations VOLUME FUNCTION To Do this Adjust the volume Turn VOLUME. Turn off the radio Set FUNCTION to TAPE (CD/RADIO OFF). To improve broadcast reception Reorient the antenna for FM. Reorient the player itself for AM. For FM For AM Basic Operations 7 CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92
ページ8に含まれる内容の要旨
Playing a tape 1 32 3 2 Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to TAPE(CD/ RADIO OFF). 2 Press p6 to open the tape compartment on deck A or deck B and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. With the side you want to play facing forward 3 Press (. 8 Basic Operations CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92
ページ9に含まれる内容の要旨
Basic Operations Use these buttons for additional operations P VOLUME 0/) 0/) P p6 p6 Note To Do this During playback, do not Adjust the volume Turn VOLUME. press buttons on the other deck. Otherwise Stop playback Press p6 the playback speed may change. Fast-forward or rewind the tape Press ) or 0 Pause playback Press P. Press the button again to resume play after pause. Eject the cassette Press p6. Basic Operations 9 CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92
ページ10に含まれる内容の要旨
Recording on a tape 31 Connect the supplied AC power cord (see page 16). 1 Press p6 to open the tape compartment on deck B and insert a blank tape. Use TYPE I (normal) tape only. With the side you want to record on facing forward 2 Select the program source you want to record. Display To record from the CD player, set FUNCTION to CD and insert a CD (see page 4). To record from the radio, set FUNCTION to RADIO, select the band, and tune in the station you want (see page 6). To record from the t
ページ11に含まれる内容の要旨
Basic Operations 3 Start recording. Deck B To record from the CD player or the radio, press r on deck B (( is depressed automatically.) Deck A To record from the tape, press P and ( on deck A. (For high speed dubbing, press HIGH SPEED DUBBING instead.) Then press r Deck B on deck B (( is depressed automatically). Tips Use these buttons for additional operations • Adjusting the volume or the audio emphasis (see p6 P page 17) will not affect the recording level. • For the best results, use the AC
ページ12に含まれる内容の要旨
The CD Player Using the display DISPLAY/ENT You can check information about the CD using the display. Checking the total track numbers and playing time Press DISPLAY/ENT in stop mode. Total playing time Total track numbers Checking the remaining time Press DISPLAY/ENT while playing a CD. To display Press DISPLAY/ENT Remaining time on the Once current track* Remaining time on the CD Twice and the number of tracks left Playing time and the current Three times track number * For a track whose numbe
ページ13に含まれる内容の要旨
The CD Player Locating a specific = / + point in a track AMS/SEARCH You can locate a specific point in a track while playing a CD using + or = AMS/SEARCH. To locate Press a point while listening to + (forward) or = the sound (backward) AMS/SEARCH while playing and hold down until you find the point. a point while observing + (forward) or = the display (backward) AMS/SEARCH in pause and hold down until you find the point. The CD Player 13 CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92
ページ14に含まれる内容の要旨
Playing tracks PLAY = / + ^ repeatedly MODE AMS/SEARCH FUNCTION (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see page 15 ). 1 Set FUNCTION to CD. 2 Press PLAY MODE until the repeat mode you want appears in the display. To repeat Select a single track REP 1 all tracks REP ALL tracks in random order SHUF REP programed tracks PGM REP 3 Do either of the following to start repeat play: • When you’ve selected REP1, select the track by pressing + or = AMS/SEARC
ページ15に含まれる内容の要旨
The CD Player Creating your FUNCTION DISPLAY/ENT p own program = / + PLAY MODE ^ AMS/ (Program Play) SEARCH You can arrange the playing order of the tracks on a CD. Tips 1 Set FUNCTION to CD. • You can play the same 2 PressPLAY MODE until “PGM” appears in the program again, since the program is saved display. until you open the CD 3 Press + or = AMS/SEARCH then press compartment or switch DISPLAY/ENT for the tracks you want to FUNCTION. • The current program program in the order you want. You c
ページ16に含まれる内容の要旨
Setting Up Choosing the AC IN power sources You can use the AC power or batteries as a power source. Use the AC power source whenever you record since recording consumes much Battery compartment power. To a wall outlet Connecting the AC power cord Insert one end of the supplied AC power cord to the AC IN socket located at the rear of the player, and the other end to the wall outlet. Tip Using the player on batteries Replace the batteries Insert eight size D (R20) batteries (not supplied) into wh
ページ17に含まれる内容の要旨
Setting Up Adjusting the TONE sound emphasis MEGA BASS (TONE/MEGA BASS) You can adjust the tone and reinforce the bass sound. Adjusting the tone Turn TONE. Turn the control clockwise to enhance the high tone and counterclockwise to enhance the low tone. Reinforcing the bass sound Press MEGA BASS. To return to normal sound, press the button again. Setting Up 17 CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92
ページ18に含まれる内容の要旨
Additional Information Precautions On safety On placement • As the laser beam used in the CD • Do not leave the player in a location near heat sources, or in a place subject player section is harmful to the eyes, do not attempt to disassemble the to direct sunlight, excessive dust or casing. Refer servicing to qualified mechanical shock. personnel only. • Do not place the player on an inclined • Should any solid object or liquid fall or unstable place. into the player, unplug the player, and • D
ページ19に含まれる内容の要旨
Notes on CDs Notes on cassettes • Before playing, clean the CD with a • Break off the cassette tab from side A cleaning cloth. Wipe the CD from the or B to prevent accidental recording. If center out. you want to reuse the tape for recording, cover the broken tab with adhesive tape. Side A Tab for side A • Do not use solvents such as benzine, Tab for side B thinner, commercially available cleaners or anti-static spray intended • To record on a tape with its tab broken for vinyl LPs. off, cover t
ページ20に含まれる内容の要旨
Troubleshooting Symptom Remedy The power does not come on. • Connect the AC power cord securely. • Make sure the batteries are inserted correctly. • Replace all the batteries with new ones if they are weak. There is no audio. • Make sure the FUNCTION selector is set to the function you want to operate. • Adjust the volume. • Unplug the headphones when listening through speakers. The audio is weak or has poor • Replace all the batteries with new ones if they quality. are weak. • Move the player a
