PYLE Audio UNIVERSAL DOCKING STATION PIWPD3の取扱説明書

ページ1に含まれる内容の要旨

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety.
However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating
instructions carefully before installation and use, and keep these instructions handy for future reference. Take special
note of all warnings listed in these instructions and on the unit.
1. Water and Moisture
The unit should n

ページ2に含まれる内容の要旨

LOCATION OF CONTROLS DOCKING STATION: REMOTE CONTROL Front View Backside 1 Volume Rotary Knob 14 Power On/Standby 2 Speaker Charging Indicator light 15 Function button 3 Speaker 16 Menu button 4 Open button (Press to detach the 17 Mute button Speaker from the main base) Bottom View 5 Skip - Button 18 Repeat button 6 Power on Indicator/Remote sensor 19 Random Button 7 Play/Pause button 20 UP button 8 Skip + Button 21 Enter button 9 iPhone/iPod Connec

ページ3に含まれる内容の要旨

POWER SOURCES GENERAL OPERATION Power of Main Base The main base is operated by an external AC-DC Power Adaptor with an output of 9V DC / 2000mA 1. Select a proper docking adaptor (enclosed when (included). purchase an iPod) and place it into the base, no adaptor required if you use iPhone, then dock your iPod/iPhone 1. Insert the adaptor's DC output plug into the DC-IN jack on the back of the Main base gently. 2. Plug the adaptor into a convenient AC wall o

ページ4に含まれる内容の要旨

1. Slide the Combination dead bolts to unlock position. 2. Press the Open buttons to detach the speakers from the main base. TROUBLESHOOTING GUIDE Using the Aux-in Jack Should you experience difficulties in the use of this player, please refer to the following chart. 1. Press and hold the Play/Pause on the main base or press the Power on button on Symptom Possible problem Solution remote control to turn on the main base, the power on indicator will turns on with red co

ページ5に含まれる内容の要旨

SPECIFICATIONS Power Supply Power adaptor (included): Input AC 100-240V ~ 50/60Hz Output DC 9V 2A Power of remote control: 1 xDC 3V CR2025 button cell (included) Wireless Transmission: 2.4GHz 9