ページ1に含まれる内容の要旨
Specifications
Krell Interface Dock
KID SPECIFICATIONS PAPA DOCK SPECIFICATIONS
Papa Dock
Inputs Frequency Response
1 30-pin iPod-device type 20 Hz to 20 kHz, +0, -0.15 dB
1 3-conductor 3.5 mm connector <0.2 Hz to 110 kHz,+0 dB, -3 dB Owner’s Reference
Audio Outputs Signal-to-noise Ratio
1 pair balanced via XLR connectors Wideband, unweighted, referred to full power output:
1 pair single-ended via RCA connectors >108 dB
Video Outputs “A” weighted: >116 dB
1 S-Video via a DIN connector Gain:
ページ2に含まれる内容の要旨
Krell / Papa Dock Front Panel and Remote Control Functions for the KID Owner’s Reference, v 08.0 CONTACT INFORMATION TOP AND FRONT PANEL ONLY Krell Industries, Inc. 22 iPod-device docking station When an iPod-device is removed from the 45 Connair Road Connect the iPod-device to the KID by plug- dock connector, the KID automatically reverts Orange, CT 06477-3650 USA ging it into the dock connector. The iPod- to the stand-by mode. TEL 203-298-4000 device takes the KID in and out of stand
ページ3に含まれる内容の要旨
Introduction Front Panel Functions Overview Remote Control Functions List of Illustrations INTRODUCTION FIGURE 6 KID Front Panel Thank you for your purchase of the KID, the Krell Papa Dock. The Papa Dock is engineered to drive Docking station inset: Interface Dock, and/or the Papa Dock. The KID can virtually any loudspeaker to realistic listening levels. Inset shows iPOD-device support be operated alone, or docked in the optional Papa The amplifier has a proprietary connection for the affixe
ページ4に含まれる内容の要旨
Insert the iPod-device into the KID Dock Connector Unpacking the KID Power LED Color Guides Unpacking the Papa Dock Operation UNPACK THE KID FIGURE 4 Inserting the iPod-device Into the Dock Connector One person can remove the KID from its shipping 4. Set the remote and the AC power cord aside, 1 box safely and easily. for later use. 5. Insert your hands below the left and right foam 1. Open the shipping carton top flap. You see the inserts surrounding the KID. literature pack containing: 1 Own
ページ5に含まれる内容の要旨
Connecting the Papa Dock to Your System Affix the iPod-device Support to the KID Top Cover AC Power Guidelines for the Papa Dock Install the Battery in the KID Remote Papa Dock Back Panel Connections Placement Considerations CONNECTING TO YOUR SYSTEM, continued FIGURE 1 The iPod-device Support AFFIX THE iPOD-DEVICE SUPPORT TO THE KID TOP COVER Connect the Papa Dock to Your System 5. Plug the AC power cord into the amplifier’s IEC 2 With the KID docked onto the Papa Dock: connector (21). IMPORT
ページ6に含まれる内容の要旨
Connect to Your System Placement Considerations, continued AC Power Guidelines for the KID The KID / Papa Dock Connection KID Back Panel Connections PLACEMENT CONSIDERATIONS, continued CONNECT TO YOUR SYSTEM Krell recommends using balanced interconnect Dock is a 150 W amplifier specifically designed by Component Ventilation, continued 6 The air space between the chassis and shelf must cables. Balanced interconnect cables not only can Krell for use with the KID. If the KID is placed in a closed c
