ページ1に含まれる内容の要旨
USER’S GUIDE
V:1707-0201-10
ITP180B
Bar Speaker with Dock for iPhone/iPod
For the most up-to-date version of this User’s Guide, go to www .ilive.net
ページ2に含まれる内容の要旨
WARNINGS AND PRECAUTIONS • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF WARNING: TO REDUCE THE RISK OF PLUG TO WIDE SLOT, FULLY INSERT. ELECTRIC SHOCK, DO NOT REMOVE COVER • WARNING: To reduce the risk of fire or electric shock, do not expose this (OR BACK). NO USER-SERVICEABLE PARTS apparatus to rain or moisture. INSIDE. REFER SERVICING TO QUALIFIED • AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, SERVICE PERSONNEL. ne pas exposer cet appareil sous la
ページ3に含まれる内容の要旨
FCC Warnings NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip- ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no gua
ページ4に含まれる内容の要旨
BAR SPEAKER WITH DOCK FOR IPHONE/IPOD Features • Works with iPhone • Video output • Made for iPod • Audio/video input • 30” length • Line input (3.5mm) • FM radio • Remote control • Station memory presets (20 FM) • Subwoofer output • Last channel memory • Last user setting memory • Treble and bass controls • 2 auxiliary audio inputs (RCA) • 2.1 channel stereo system • S-video output • Preset EQ • Basic iPhone/iPod controls • Digital clock • Supports Universal docking brackets • Single alarm • Wa
ページ5に含まれる内容の要旨
TABLE OF CONTENTS INTRODUCTION 6 SETUP 8 CLOCK, ALARM, AND SLEEP TIMER 9 IPHONE/IPOD AND FM RADIO 10 AUXILIARY INPUT, LINE INPUT AND SUBWOOFER OUTPUT 11 BASIC CONNECTIVITY 12 AV INPUT AND VIDEO INPUT 13 MOUNTING TO A WALL 14 COMPANY INFORMATION 16 CUSTOMER HELPLINE | 1-314-621-2881 iLive | ITP180B 5
ページ6に含まれる内容の要旨
INTRODUCTION POWER Press to turn the bar speaker off or on. POWER SOURCE Press to switch SOURCE between iPhone/ S iPod, AV, AUX, and FM modes. LINE IN LINE INPUT VOLUME (3.5mm) VOLUME Press to adjust the PLAY/PAUSE volume. iPod DRAWER PLAY/PAUSE Press to play or pause a docked iPhone or iPod. iPod DRAWER Press to open or close the motor- ized dock for iPhone/iPod. MOTORIZED DOCK FOR IPOD VIDEO INPUT AUXILIARY INPUT RESET Press using a SUBWOOFER paperclip or like OUTPUT object to re
ページ7に含まれる内容の要旨
STANDBY/ON iPod DRAWER Press to turn the bar Press to open or speaker off or on. close the motorized dock for iPhone/iPod. MUTE Press to mute the NUMBER KEYPAD volume. REPEAT ALARM Press to repeat a With the power single track or entire off, press to set the album on a docked alarm. iPhone or iPod. CLOCK TREBLE With the power off, With the EQ set to press to set the clock. FLAT, press to adjust the levels of treble. SLEEP Press repeatedly to MENU UP/DN set the sleep timer. Press to naviga
ページ8に含まれる内容の要旨
SETUP Power Plug the attached AC cord into a standard AC power outlet to power the bar speaker. Remote Requires 2 AAA batteries (not included) FM Antenna Plug the FM Wire Antenna (included) into the FM Antenna Connection. 8 iLive | ITP180B
ページ9に含まれる内容の要旨
CLOCK, ALARM, AND SLEEP TIMER Setting the Alarm Setting the Clock 1 Press the POWER button to turn the 1 Press the POWER button to turn the power on. power off. 2 Adjust the volume to the desired 2 Press the CLOCK button on the level. remote control. 3 Press the POWER button to turn the The time on the display will begin power off. blinking. 4 Press the ALARM button on the 3 Press the REV/MIN and FWD/HR remote control. buttons on the remote to adjust the minute and hour. The alarm time o
ページ10に含まれる内容の要旨
IPHONE/IPOD AND FM RADIO Docking an iPhone/iPod Tuning the FM Radio 1 Press the POWER button to turn the 1 Press the POWER button to turn the bar speaker on. bar speaker on. 2 Press the SOURCE button to switch 2 Press the SOURCE button to switch to iPhone/iPod mode. to FM radio mode. 3 Press the iPod DRAWER button to 3 Press the TUN/SKIP buttons on the open the MOTORIZED DOCK FOR remote to tune the FM radio. iPhone/iPod Saving a Radio Station 4 Locate the numbered bracket that fits the iPhon
ページ11に含まれる内容の要旨
AUXILIARY INPUT, LINE INPUT, AND SUBWOOFER OUTPUT Using the Subwoofer Output Using the Auxiliary Input 1 Use an RCA cable (included) to 1 Connect an RCA cable (included) to connect an external subwoofer to the AUXILIARY INPUTS on the bar the SUBWOOFER OUTPUT. speaker and an audio source. 2 When audio is played through 2 Press the POWER button to turn the any source, the bar speaker will bar speaker on. automatically use the connected 3 Press the SOURCE button to switch subwoofer. to AUX mod
ページ12に含まれる内容の要旨
BASIC CONNECTIVITY Below, you’ll see a basic flow chart of how you can connect your home entertainment devices to the bar speaker, and in turn how the bar speaker connects to them. AUDIO S-VIDEO VIDEO AUDIO &/Or VIDEO AUDIO &/Or VIDEO AUDIO DVD PLAYER DIGITAL CABLE or SATELLITE TUNER GAMING CONSOLE VCR SUBWOOFER 12 iLive | ITP180B
ページ13に含まれる内容の要旨
AV INPUT AND VIDEO INPUT Using the AV Input Using the Video Output 1 Connect an RCA cable (included) to 1 Connect an RCA cable (included) to the AV INPUTS and an audio source. the VIDEO OUTPUT and a television. 2 Press the POWER button to turn the 2 Adjust the connected television to bar speaker on. the proper input setting. 3 Press the SOURCE button to switch 3 Video from a docked iPhone/iPod, or to AV mode. a connected DVD player can now be played through the bar speaker to 4 Use the nati
ページ14に含まれる内容の要旨
MOUNTING TO A WALL Important Notes We recommend having this bar speaker professionally mounted. The included spacers should be used at your discretion to extend the face of the bar speaker farther from the wall. These are typically used when mounting the bar speaker under a television, and the face of the bar speaker needs to be flush with the face of the television. Required Tools • Manual or Power Screwdriver • Stud Finder • Pencil • Tape Measure • Level Included Hardware • (2) Wall Mo
ページ15に含まれる内容の要旨
Getting Started studs 1 Use the Tape Measure to decide how high you’d like to hang the bar speaker on the wall. screws spacer The bar speaker must be hung within 6 feet of an AC power outlet for the mounting bracket attached AC power cable to reach. 2 Use the Stud Finder to locate 2 parallel wooden studs to screw the 16” mounting brackets into. 3 Mark the wall at the center of the studs using the pencil. 4 Line the level up on both of your marks to make sure they are level. ITP180B If
ページ16に含まれる内容の要旨
COMPANY INFORMATION International Support To download this User’s Guide in English, Spanish, or French, visit the support section at www.ilive.net. Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.ilive.net. Pour télécharger ce guide de l’utilisateur en anglais, espagnol, ou français, visitez la section de soutien chez www.ilive.net. Contact Information Address: 2116 Carr Street, St. Louis MO, 63106 Phone: 1-314-621-2881 Fax: 1-314-5
