ページ1に含まれる内容の要旨
iA91/iA92 IB_US version
Size: 178 x 178 mm (16 pages)
Printing color: Black
Mat’l: 90gsm book paper
Apr. 14, 11.
Model iA91/iA92
The App-enhanced
Home System
® ®
For Your iPhone or iPod
works with
iHome + Sleep
alarm clock app
iHome + Radio
internet radio app
download QR code
reader app and scan
Note: iHome+Sleep and iHome+Radio apps are not covered in detail in this booklet. To learn more about how
these apps can enhance your experience, please download the free iHome+Sleep app from the App
ページ2に含まれる内容の要旨
Table of Contents Quick Start ........................................................................................................................................................................1 Controls and Indicators / Unit Display ..........................................................................................................................2 Setting Up the Unit ....................................................................................................................
ページ3に含まれる内容の要旨
quick start 1: power 2: antennas 3: inserts RESET TEST Tab Slot Uncoil AM antenna cable from antenna frame and plug cable into Select the dock insert for your socket on back of unit. Hold base of iPhone/iPod model from the AM antenna in one hand and bend Attach AC adaptor cable to DC table below and place insert in the outer frame around towards the jack on back of the unit and plug dock. To remove insert, place base and snap tabs into open slot the other end into a wall socket. th
ページ4に含まれる内容の要旨
Controls and Indicators Top Panel Dock Play/Pause Button Alarm 2 Button Nap Button Alarm 1 Button Bedtime Button Lower/raise volume Button Set +/- Button, skip/search FWD/REV nap bedtime mode presets eq alm. reset wakeup Alarm Reset / Power Button Wakeup Button snooze/dimmer EQ Button Mode Button Snooze/Dimmer Button Presets Button Rear Panel AC Adaptor Jack Clock Adjust /Time Sync Button Line-in Jack DST switch Time Zone Button AM Antenna 7.5V 2.5A -1 +1 clock adj/time s
ページ5に含まれる内容の要旨
Setting Up the Unit Connect Unit to Power Source Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120V AC wall socket. Adaptor must be plugged in to operate unit. The unit does not operate on batteries (a battery back up system maintains clock settings during power failures). Updating firmware on the Unit For best performance, make sure to update the unit’s firmware. To do so, download the free iHome+Sleep app from the App Store. Launch the app, then go t
ページ6に含まれる内容の要旨
Using the unit Using the Alarms This unit has a dual alarm system so you can set two separate alarms to different alarm times, wake-to sources and frequencies (daily, weekdays or weekend). Tip: Download the free iHome+Sleep app for advanced alarm, snooze and sleep functions. Setting the Alarms Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button ( or ) for whichever alarm you are setting. 1. Press and hold the or Button until the alarm time
ページ7に含まれる内容の要旨
Using the unit Snooze Operation 1. Default snooze time is 9 minutes. To program a custom snooze time, press and hold the Snooze Button during normal operation (when alarm is not sounding) until the snooze minutes display appears. Press and release the + or - Button to set the snooze timer from 1 to 29 minutes. Press and release the Snooze/Dimmer Button to exit snooze setting mode. 2. Press and release the Snooze/Dimmer Button after an alarm sounds. The alarm will be silenced for the set snoo
ページ8に含まれる内容の要旨
Using the unit 3. You can set up to 12 presets (6 AM, 6 FM).To memorize a station as a preset: A. Press and release the Mode Button to select the desired AM or FM band. B. Press and release the Presets Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and then hold the Presets Button until the selected preset number begins flashing in the display. C. Press and release the + or - Button to tune the radio to a desired station. Hold briefly to have t
ページ9に含まれる内容の要旨
Using the Unit Nap Operation Nap mode lets you set an alarm separate from the Alarm 1 and Alarm 2 settings. The nap wake to source by default is the buzzer alarm, but if an iPhone/iPod is docked (no other source is playing), that will act as the alarm source. If you are listening to the radio or aux-in source, it will be muted and the buzzer will sound at the selected wake time. 1. Press and release the Nap Button located on top of the unit as needed to adjust the nap timer for 5, 10, 15, 20,
ページ10に含まれる内容の要旨
A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and
ページ11に含まれる内容の要旨
Troubleshooting Symptom Possible Problem Solution Unit does not turn on AC adaptor isn't plugged into a working wall Plug the AC adaptor into a working wall socket and plug the connector socket or not plugged into the power supply into the supply jack on the unit jack on back of the unit Unit doesn’t respond Unit requires a reset If unit is plugged in and doesn't respond, try resetting the unit by following these steps: a) remove iPhone/iPod from dock b) unplug unit from power source c) rem
ページ12に含まれる内容の要旨
Troubleshooting Symptom Possible Problem Solution Sound is distorted Volume level is set too high Decrease the volume Sound source is distorted If the iPhone/iPod original sound source is old or of poor quality, distortion and noise are easily noticed with high-power speakers. Try a different audio file from a trusted source such as iTunes. If you are using an external sound source try reducing the output volume on the device itself. Also try turning bass boost OFF. EQ settings are too high
ページ13に含まれる内容の要旨
Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service sti
