ページ1に含まれる内容の要旨
SA308S
INSTRUCTION MANUAL
Contents
Warnings and Precautions ............................................................................... 2
Important Safety Instructions ............................................................................ 3
In the Box, Features, & Powering the Unit ....................................................... 4
Docking an iPod & Line Input ........................................................................... 5
Location of Controls......................
ページ2に含まれる内容の要旨
Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is NOTE: This equipment has been tested and found to intended to alert the user to the presence of uninsulated comply with the limits for a Class B digital device, “dangerous voltage” within the product’s enclosure that pursuant to Part 15 of the FCC Rules. These limits may be of sufficient magnitude to constitute a risk of are designed t
ページ3に含まれる内容の要旨
Important Safety Instructions 1. Read Instructions - All the safety and operating instruction should be read 15. Outdoor Antenna Grounding - If an outside antenna is connected to before the product is operated. the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of . Retain Instructions - The safety and operating instruction should be the National Electrical Code, ANSI/NFPA 70, provides inform
ページ4に含まれる内容の要旨
In the Box • SA308S • AC/DC Adapter • Documentation Features • Portable Amplified Speakers • Slide Position 3.5mm Stereo HP-type Pin • Plugs into iPod Nano & Shuffle and other Audio Players • Built-In Amplifier • Line-In Jack, 3.5mm type • DC Input Jack • AC/DC Powered: • DC: Uses 4-”AAA” Batteries, (not included) Powering the Unit The unit can be powered by 4 AAA batteries, or by being plugged into a standard AC outlet (10V ~ 60Hz) using the included AC/DC Adapter. 4
ページ5に含まれる内容の要旨
Docking an iPod An iPod nano or iPod shuffle (2nd Generation) can be connected to the unit via the headphone-type pin on the front of the unit. To connect any other iPod, use the Line Input on the back of the unit. Connecting an iPod using the Line Input requires a 3.5mm mini-phono cable (not included). MENU Line Input 1. Plug one end of a 3.5 mm mini-phono cable (not included) into the Line Input on the unit. . Plug the other end of the cable into the audio output/headphone output on an Mp3
ページ6に含まれる内容の要旨
Location of Controls 1 3 4 5 6
ページ7に含まれる内容の要旨
Control Definitions 1 3.5mm Headphone Pin Use the 3.5 mm Headphone Pin to connect an iPod shuffle (2nd Generation) or an iPod nano to the unit. 2 Power Switch Use the Power Switch to turn the unit off and on. 3 Line Input (mini-phono 3.5mm) Use the Line Input to connect an MP3 or other audio source player to the unit. Please note, whenever the line input is connected, the iPod audio will be cut. 4 Battery Compartment (Requires 4 AAA Batteries, not included) 5 DC Power Input The DC Power In
ページ8に含まれる内容の要旨
Service Information Address 116 Carr Street, St. Louis MO, 63106 Phone 1-314-61-881 Fax 1-314-588-1805 Email prodinfo@gpx.com Website www.gpx.com To download this Instruction Man- Para descargar este manual de Pour télécharger ce manuel ual in English, Spanish, or French instrucción en inglés, español, o d’instruction en anglais, espagnol, visit the Support section at francés visite la sección de la ayu- ou le Français visitez la section de www.gpx.com. da en www.gpx.com. soutien à www.
