ページ1に含まれる内容の要旨
Crestron BB-6X-DSW
Pre-Construction Wall Mount Back Box
for TPS-6X-DSW
Installation Guide
ページ2に含まれる内容の要旨
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2008 Crestron Electronics, Inc.
ページ3に含まれる内容の要旨
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box Contents Pre-Construction Wall Mount Back Box: BB-6X-DSW 1 Description.................................................................................................................................1 Setup ..........................................................................................................................................5 Assembly...................................................................................
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box Pre-Construction Wall Mount Back Box: BB-6X-DSW Description ® ® The Crestron BB-6X-DSW back box provides a UL -listed, recess-mounted steel enclosure for the TPS-6X-DSW Wall Mount Docking Station. Designed for pre- construction applications, the BB-6X-DSW permits fastening to the left or right side of a stud in a framed wall prior to installation of sheet rock. Conduit knockouts are provided on the top and bottom to accommodate a va
ページ6に含まれる内容の要旨
Pre-Construction Wall Mount Back Box Crestron BB-6X-DSW The mounted view of the BB-6X-DSW is shown in the following illustration. BB-6X-DSW Mounted View (Optional Cover Plate Attached) 2 • Pre-Construction Wall Mount Back Box: BB-6X-DSW Installation Guide – DOC. 6728A
ページ7に含まれる内容の要旨
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box The dimensions of the BB-6X-DSW are shown in the following illustration. BB-6X-DSW Overall Dimensions (Front View) 12.00 in (30.46 cm) 8.00 in (20.32 cm) 9.06 in (23.01 cm) 8.88 in (22.54 cm) 6.35 in (16.13 cm) 9 in (227 mm) 7 3/4 in (197 mm) 6 3/4 in (171 mm) 6 in (152 mm) 5 in (127 mm) 6 1/4 in 158 mm) 6 3/16 in (155 mm) 5 7/8 in (148 mm) Installation Guide – DOC. 6728A Pre-Construction Wall Mount Back Box: BB-6X-DSW • 3
ページ8に含まれる内容の要旨
Pre-Construction Wall Mount Back Box Crestron BB-6X-DSW BB-6X-DSW Overall Dimensions (Bottom View) 3.31 in (8.41 cm) 3.25 in (8.25 cm) 1.50 in 10.50 in (3.81 cm) (26.65 cm) NOTE: Knockout holes are intended for Class 2 wiring only and are ½” and ¾” diameter. BB-6X-DSW Overall Dimensions (Cover Plate) 9.85 in (25.02 cm) 7.00 in (17.78 cm) 0.03 in (0.08 cm) 4 • Pre-Construction Wall Mount Back Box: BB-6X-DSW Installation Guide – DOC. 6728A
ページ9に含まれる内容の要旨
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box Setup Assembly Required Tools: • #2 Phillips tip screwdriver The back box mounting enclosure comes fully assembled except for a grounding screw. To prepare for mounting, complete the following procedure: 1. Remove knockouts as required. 2. Attach the supplied #08-8B self-tapping screw to back box mounting enclosure assembly for grounding. NOTE: The #08-8B self-tapping screw (2007277), supplied for grounding purposes, is install
ページ10に含まれる内容の要旨
Pre-Construction Wall Mount Back Box Crestron BB-6X-DSW Mounting the Back Box ENSURE THESE SURFACES ARE FLUSH BACK BOX MOUNTING ENCLOSURE ASSEMBLY (4507462) NOTE: BE SURE THE ASSEMBLY IS LEVEL SCREW (1) #08-8B x ¼" WHEN MOUNTED. SELF-TAPPING FOR GROUNDING (2007277) 6 • Pre-Construction Wall Mount Back Box: BB-6X-DSW Installation Guide – DOC. 6728A
ページ11に含まれる内容の要旨
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box Mounted View with Cover Plate (Mounting Example Prior to Drywall Installation) NOTE: BACK BOX IS TO BE COVERED WITH DRYWALL AND THEN THE CUTOUT MADE AROUND THE INSIDE OF THE OPENING. BE SURE TO LEAVE THE FOUR TAPPED HOLES ON THE FRONT OF THE BOX EXPOSED TO ACCEPT THE MOUNTING SCREWS. COVER PLATE (2022825) USE TO COVER CUTOUT IN DRYWALL SCREWS (4) #06-32 x 1½" BEFORE TPS-6X-DSW IS INSTALLED PAN HEAD (2007254) (MAY BE REQUIRED BY LOCAL BU
ページ12に含まれる内容の要旨
Pre-Construction Wall Mount Back Box Crestron BB-6X-DSW Mounting TPS-6X-DSW Docking Assembly and BB-6X-DSW Back Box – Exploded View BB-6X-DSW DRYWALL TPS-6X-DSW SCREWS (4) #06-32 x 1½" PAN, PHIL (2007254) Other Mounting Option Accessories If too much of the mounting plate is exposed after the drywall is cut, you may need to patch the area. Crestron provides the following accessories: • MMK-6X-DSW (Doc. 6779) – for larger repairs and to fill in larger irregularities around the opening (r
ページ13に含まれる内容の要旨
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box Resources Industry Compliance This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. (E227280) As of the date of manufacture, the BB-6X-DSW has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Reference Documents The latest version of all documents mentioned within the guide can be obtained fr
ページ14に含まれる内容の要旨
Pre-Construction Wall Mount Back Box Crestron BB-6X-DSW Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem,
ページ15に含まれる内容の要旨
Crestron BB-6X-DSW Pre-Construction Wall Mount Back Box This page is intentionally left blank. Installation Guide – DOC. 6728A Pre-Construction Wall Mount Back Box: BB-6X-DSW • 11
ページ16に含まれる内容の要旨
Crestron Electronics, Inc. Installation Guide – DOC. 6728A 15 Volvo Drive Rockleigh, NJ 07647 (2021897) Tel: 888.CRESTRON 12.08 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
