ページ1に含まれる内容の要旨
Keyboard Operator’s Manual
AD2089
Part Number 8200-0710-01 B0
REV 1
ページ2に含まれる内容の要旨
Notice The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice. Copyright Under copyright laws, the contents of this manual may not be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form, in whole or in part, without prior written consent of Sensormatic Electronics. © Copyright 1997-2005, Sensormatic E
ページ3に含まれる内容の要旨
Warnings WARNING: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT INSTALL THIS PRODUCT IN HAZARDOUS AREAS WHERE HIGHLY COMBUSTIBLE OR EXPLOSIVE PRODUCTS ARE STORED OR USED. The lightning flash/arrowhead symbol, within an equilateral triangle, alerts the user to the presence of a shock hazard within the product’s enclosure. CAUTION: Danger of exp
ページ4に含まれる内容の要旨
License Information READ THIS LICENSE AGREEMENT BEFORE OPENING THE DISK PACKAGE, INSTALLING THE SOFTWARE, OR USING YOUR SYSTEM. THIS LICENSE AGREEMENT DEFINES YOUR RIGHTS AND OBLIGATIONS. BY BREAKING THE SEAL ON THIS PACKAGE, INSTALLING THE SOFTWARE, OR USING YOUR SYSTEM, YOU AGREE TO ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT, YOU MAY, WITHIN 30 DAYS, RETURN THIS PACKAGE, ALL THE DOCUMENTATION, AND ALL ACCOMPAN
ページ5に含まれる内容の要旨
Contents Contents AD2089 Keyboard Controller About the AD2089 Keyboard Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 AD2089 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 AD2089 Keyboard Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Connection and Setup of the AD2089 Supplied Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Contents Playback Mode Operations (keyswitch in operate position) . . . . . . . . . . . . . . . . .21 Selecting DVRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Programming with the AD2089 Using the AD2089 in Program Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Setting Presets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Setting Scratch Pad Tours . . . .
ページ7に含まれる内容の要旨
Contents Macro Key Labels Macro Programming Worksheets Macro Programming Workskeet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 User’s Guide ix
ページ8に含まれる内容の要旨
Contents x Intellex® Digital Video Management System
ページ9に含まれる内容の要旨
AD2089 Keyboard Controller About the AD2089 Keyboard Controller This chapter describes the features of the AD2089 keyboard. It also describes the location and function of the keyboard's front panel components. AD2089 Features The AD2089 video control station is fully compatible with the American Dynamics MegaPower CPU and MegaPower 1024 when used in conjunction with Network Client 4.04 (or later) and Intellex DVMS or Ultra digital video recorders. Note In addition to controlling the matrix sw
ページ10に含まれる内容の要旨
AD2089 Keyboard Controller • selectable speaker volume - enables eight different volume levels • auto focus/auto iris capability - supported when used with DeltaDome units AD2089 Keyboard Overview The AD2089 keyboard is comprised of the following elements: ASite - shows the number of the site entered with the keypad when the SITE key (Sk) is pressed. B Monitor/DVMS - shows the number of the monitor or DVR entered when the MON (Mk) or DVMS key is pressed. CCamera - shows the number of the came
ページ11に含まれる内容の要旨
AD2089 Keyboard Controller Multi-Function Keys 12 OFF/Page Left key/ Stop - turns off auxiliary device in Monitor Operate mode. Displays page to the left in Menu mode. In Playback Operate mode, DATE allows you to select a specific date for playback. On the Numbers Keypad, enter a 4-digit date (mmdd) and press DATE. As a shortcut, you can enter a 2-digit date (dd). 13 ON/Page Right key/ Record - turns on auxillary device in Monitor Operate mode. Displays place to the right in Menu mode. In P
ページ12に含まれる内容の要旨
Connection and Setup of the AD2089 Connection and Setup of the AD2089 This chapter describes the power and data connections between the AD2089 keyboard and the switching system being used. It also describes the setup of communications protocols and other keyboard parameters. Additionally, it describes built-in test procedures used to verify the operational integrity of the keyboard. Supplied Equipment The AD2089 is supplied with the following equipment and accessories: • Wall Transformer (sp
ページ13に含まれる内容の要旨
Connection and Setup of the AD2089 Connections for Cable Distance of Seven Feet or Less For switching system connections where keyboard-to-system cable distance is seven feet or less, make the following connections using the jumpers included with the dual terminal block J1 Pins J2 Pins 5 (xmit) 4 (rcd) ⇐ 4 (rcd) 5 (xmit) ⇐ 7 (ground) 7 (ground) ⇐ After connecting the jumpers, connect one of the seven foot modular cables from the J2 (system) jack of the dual terminal block, to the appropriate R
ページ14に含まれる内容の要旨
Connection and Setup of the AD2089 Installation Precautions The keyboard unit is susceptible to high electrostatic discharge potentials. Care should be taken to locate the unit so as to reduce the likelihood of accidental contact with ESD potentials, such as walking on a carpet under very dry conditions. Should accidental contact occur, and the keyboard unit experiences loss of camera control, momentarily remove power to the unit. This will re-establish communication with the connected unit
ページ15に含まれる内容の要旨
Connection and Setup of the AD2089 Keyboard Setup The AD2089 keyboard communicates via RS-232 protocol. Keyboard setup up the keyboard involves setting the keyboard's baud rate, LED brightness, speaker volume, and PTZ motion control. Setting Keyboard Parameters The operator can set the following four keyboard parameters: • Baud Rate – 1200 (default), 2400, 4800, 9600, 19,200, and 38,400 bps • LED Brightness - eight brightness levels • Speaker Volume - eight volume levels • Pan/Tilt/Zoom Motor
ページ16に含まれる内容の要旨
Connection and Setup of the AD2089 2 To change the currently displayed volume level, cycle through the levels using the NEXT or LAST keys to move in forward or reverse direction respectively. Each time the level changes, a short tone sounds indicating the new level. 3 When the appropriate level appears in the ENTER display, press the PROG key to save the selection. You now have the option to either set the PTZ motion control option using the following procedure, or exit the setup mode by pr
ページ17に含まれる内容の要旨
Connection and Setup of the AD2089 Built-in Keyboard Operations Test CAUTION ! The following procedures expose internal electrical components and should be performed by qualified service personnel only. The AD2089 has built-in test capability to verify the operational integrity of the unit's hardware and firmware. Built-in test functions include the following: • speaker test •LED lamp test • LED brightness test • LED seven segment test • joystick calibration / speed test • key functionality t
ページ18に含まれる内容の要旨
Connection and Setup of the AD2089 Speaker Test The speaker test performs an audible check of the keyboard's speaker. A series of audio tones step through the frequency range of the speaker. During this test the CAMERA display shows the message "SOUND". The speaker test is repeated automatically, until the test switch button is pressed to advance to the LED lamp test. LED Lamp Test The LED lamp test simultaneously illuminates all segments of all LEDs in the four keyboard display sections. P
ページ19に含まれる内容の要旨
Connection and Setup of the AD2089 pan speed (1-8) pan direction (left or right) tilt speed (1-8) tilt direction (up or down) Enter Display 8 L 1 d (Joystick in Motion) • From left to right, the first digit represents the pan speed. Speed is directly proportional to the distance from the joystick’s center position. “1” represents the slowest pan speed, and is therefore the position closest to the center. “8” represents the fastest pan speed, and is therefore the position furth
ページ20に含まれる内容の要旨
Connection and Setup of the AD2089 Note The count in the ENTER display includes the keys in the ENTER, MULTI-FUNCTION, and CONTROL sections of the keyboard, as well as the “flip” button on the joystick. To verify proper operation, each key on the AD2089 keyboard must be pressed once. The keys can be pressed in any order. When a key is pressed. • An audible tone is sounded, verifying key recognition by the keyboard's microprocessor. • The number in the associated display decrements by one. Pre
