ページ1に含まれる内容の要旨
User Guide
ページ2に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse Introduction Thank you for your purchase of the Targus Bluetooth Comfort Laser Mouse. This mouse uses Bluetooth technology which provides a seamless connection up to 33 feet (10 m) away. This is a plug and play device so no additional software is required. The advance scroll wheel feature program can be downloaded from the Targus website. Contents • Targus Bluetooth Comfort Laser Mouse • 2 x AA Batteries • User Guide System Requirements Hardware • Bluetoo
ページ3に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse Installing the Batteries 1. Remove the battery cover from the top of the mouse by using the notch on the back. Carefully lift the cover up as shown in the diagram. 2. Remove the battery safety clip by squeezing the center of the clip and sliding it back, towards the rear of the mouse. Lift up and rotate the clip out of the way. NOTE: THE BATTERY SAFETY CLIP WILL NEED TO BE IN THE SECURE, LOCKED POSITION BEFORE THE BATTERY COVER CAN BE PUT BACK IN PLACE.
ページ4に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse 3. Slide and lift to remove the battery holder as shown. 4. Insert the two AA batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery compartment. 4
ページ5に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse 5. Replace the battery safety clip and by sliding it forward until it clicks into place and then replace the battery cover. 6. Turn on the mouse by pressing the power On/Off button on the bottom of the mouse. Hold for 3 seconds and then release. Power button 5
ページ6に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse Power On: Press and hold the power button for 3 seconds and then release. The battery life indicator will briefly light up showing the current power level of the batteries. Power Off: Press and hold the power button for 3 seconds and then release. The battery life indicator will briefly light up and then fade out. Battery Check: After the mouse is turned on, quickly press and release the power button. The battery life indicator will light up showing the c
ページ7に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse Power Saving mode: After an extended period of time, if the mouse is not used, it will automatically enter power saving mode to conserve power and increase battery life. Click on any mouse button to resume the normal operation. The mouse may take a few seconds to reconnect with your computer. Battery Life Indicator 3 LEDs lit Full power 2 LEDs lit Half power 1 LED lit Low power NOTE: WHEN THE FIRST LIGHT IS BLINKING, PLEASE REPLACE THE BATTERIES Power
ページ8に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse Initial Configuration ® Before you can begin using your Bluetooth mouse, you will first need to perform some initial setup steps. NOTE: PLEASE USE THE LATEST BLUETOOTH DEVICE DRIVER. INSTRUCTION SCREENS MIGHT VARY DEPENDING ON THE VERSION OF YOUR BLUETOOTH DEVICE DRIVER. 8 fi
ページ9に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse Connecting with Bluetooth Software: WIDCOMM or Microsoft (Windows XP & Windows Vista) 1. Go to the Bluetooth Places icon located on your desktop or in the system tray and double click, then click Add a Bluetooth Device. (Windows XP) (Windows Vista) 2. The Bluetooth Wizard screen will prompt. Please follow the onscreen instructions. (Windows XP) (Windows Vista) 9
ページ10に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse 3. Power on the mouse and it will automactically go into discovery mode. Click Next to continue pairing and the computer will search for the mouse. (Windows XP) (Windows Vista) 4. The confirmation window will appear after the computer finishes detecting the Bluetooth devices. Select the Bluetooth Wireless Mouse and click Next to continue. (There may be one or more different Bluetooth devices detected.) If the mouse is not detected, please make sure the po
ページ11に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse 5. After selecting the correct device, the computer will finish establishing the connection. Please wait until the setup is completed. (Windows XP) (Windows Vista) 11
ページ12に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse Connecting with Bluetooth Software: TOSHIBA (Windows Vista) 1. Double click on the Bluetooth Manager icon in the system tray, and then click Add New Connection. 2. Power on the mouse and it will automactically go into discovery mode. Click Next to continue pairing and the computer will search for the mouse. 12
ページ13に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse 3. The computer will now search for the Bluetooth mouse and other Bluetooth devices. Please wait until the search is completed. Choose the device you wish to connect. There may be more than one Bluetooth device detected. Select Bluetooth Wireless Mouse and click Next to continue. If the mouse is not detected, please make sure the mouse is in discovery mode and click Refresh. 4. The computer will begin connecting with the device. 13
ページ14に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse 5. The connection is established and setup is complete. The device is ready to use. If the connection is not successful, please click Back and search the device again. You can continue to add other Bluetooth devices or close the window. 14
ページ15に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse Bluetooth Software: Mac 1. Go to the Bluetooth icon located on your desktop or in the system bar and click the icon to begin setup. Select “Turn Bluetooth On” to activate the Bluetooth function on your Mac. 2. Scroll down the list and select “Set up Bluetooth Device...” 3. The Bluetooth Setup Assistant will begin. Please follow the on-screen instructions. 15
ページ16に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse 4. Select “mouse” and click continue to proceed with setup. Your mouse will need to be in “discovery” mode to connect. Power on the mouse and it will automactically go into discovery mode. 5. Your computer will begin to search for the mouse. Once the mouse is found, it will show up in the list. Highlight your mouse and press continue. 16
ページ17に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse 6. The Bluetooth mouse will now begin pairing. Click continue to proceed. 7. Congratulations. Your Bluetooth mouse is setup and ready to use. You can choose to setup another device or click Quit to exit setup. 17
ページ18に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse Programming Your Mouse (Windows Only) To access the advanced scroll wheel features you will need to download and install the software driver. This can be downloaded from the following location: Visit www.targus.com to download and install the driver. Once installation is complete, open the driver software and select the desired setting for the scroll-wheel button. Close the driver software application and you’re ready to go. Activate your selected feat
ページ19に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse Troubleshooting The mouse is not working. • Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) connections in the battery housing. • Make sure the batteries are charged. Recharge or replace if necessary. • Verify that the computer is Bluetooth enabled. • Verify that the device drivers are installed: 1. Click Start/ Settings/ Control Panel/ System/ Hardw
ページ20に含まれる内容の要旨
Targus Bluetooth Comfort Laser Mouse Technical Support For technical questions, please visit: US Internet: www.targus.com/support.asp Australia Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645 New Zealand Telephone: 0800-633-222 Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. Go to: http://www.targus.com/registration.asp You will need to provide your full name, email address, country of residence
