ページ18に含まれる内容の要旨
Food Processing Tips USING THE To mince garlic or to chop fresh MULTIPURPOSE herbs or small quantities of BLADE vegetables: With processor running, add food To chop fresh fruits or through the feed tube. Process until vegetables: chopped. For best results, make sure Peel, core, and remove seeds. Cut work bowl and herbs are very dry 1 food in 1- to 1 ⁄2-inch pieces. Process before chopping. food to desired size, using short To chop nuts or make pulses, 1 to 2 seconds each time. nut butters: Scra
ページ19に含まれる内容の要旨
Food Processing Tips To grate hard cheeses, such as To slice or shred fruits or Parmesan and Romano: vegetables that are long and relatively small in diameter, such Never attempt to process cheese that as celery, carrots, and bananas: cannot be pierced with the tip of a sharp knife. You can use the Cut food to fit feed tube vertically or multipurpose blade to grate hard horizontally, and pack feed tube cheeses. Cut cheese in 1-inch pieces. securely to keep food positioned Place in work bowl. Pro
ページ20に含まれる内容の要旨
Food Processing Tips To slice uncooked meat or To slice cooked meat or poultry, poultry, such as stir-fry meats: including salami, pepperoni, etc.: Cut or roll food to fit feed tube. Wrap Food should be very cold. Cut in and freeze food until hard to the pieces to fit feed tube. Process food touch, 30 minutes to 2 hours, using firm, even pressure. depending on thickness of food. To shred firm and soft cheeses: Check to be sure you can still pierce Firm cheese should be very cold. For food with
ページ1に含まれる内容の要旨
7 CUP
FOOD PROCESSORS
INSTRUCTIONS AND RECIPES
MODELS KFP730, KFP720 AND KFP710
FPO
1-800-541-6390
Details Inside
®
™
FOR THE WAY IT’S MADE.
1 1
ページ2に含まれる内容の要旨
Hassle-Free Replacement Warranty We’re so confident If You Reside In The 50 United ® the quality of our States and your KitchenAid Food products meets the Processor should fail within the first exacting standards of year of ownership, simply call our KitchenAid that, if your toll-free Customer Satisfaction Center Food Processor should at 1-800-541-6390 Monday through fail within the first year of ownership, Friday, 8 a.m. to 8 p.m. (Eastern Time), KitchenAid will arrange to deliver an or Satur
ページ3に含まれる内容の要旨
Table of Contents INTRODUCTION Hassle-Free Replacement Warranty...........................................Inside Front Cover Product Registration Card ........................................................Inside Front Cover Food Processor Safety........................................................................................3 Important Safeguards........................................................................................4 Electrical Requirements..............................
ページ4に含まれる内容の要旨
Table of Contents FOOD PROCESSING TIPS Using the Multipurpose Blade..........................................................................16 Using the Reversible Slicing/Shredding Disc......................................................17 Helpful Hints ...................................................................................................18 RECIPES Appetizers, Dips and Spreads .........................................................................20 Salads, Soups and Sandwiche
ページ5に含まれる内容の要旨
Food Processor Safety Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: You can be killed or seriously injured if you don’t immediate
ページ6に含まれる内容の要旨
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock do not put Food Processor in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning. 5. Avoid contacting moving parts. 6. Do not operate any ap
ページ7に含まれる内容の要旨
Electrical Requirements Volts: 120 V.A.C. only. Hertz: 60 Hz NOTE: This Food Processor has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or
ページ8に含まれる内容の要旨
Off Pulse On Food Processor Features Work Bowl Reversible Slicing/ Shredding Disc Heavy-Duty Base 3-Cup Mini Bowl and Mini Blade Lever Arm Disc Stem 2-Piece Cone Strainer Basket Work Bowl Cover with Feed Tube Spatula/ Cleaning Tool Food Pusher Stainless Steel Multipurpose Blade 6
ページ9に含まれる内容の要旨
Food Processor Features Work Bowl Cover with Feed Tube Reversible Slicing/Shredding Disc Feed tube accommodates long food This reversible (2 mm) slicing and items with a minimum of sectioning. (4 mm) shredding disc is a precision Unlike extra-wide feed tubes, there is slicing blade on one side and, when no pusher interlock system, so the turned over, can produce uniform entire length of the tube can be filled shreds of most firm fruits, vegetables, with food. and cheese. Food Pusher Disc Stem
ページ10に含まれる内容の要旨
Off On Pulse Preparing the Food Processor for Use 4. Insert the desired blade or disc into the work bowl. See next page WARNING for instructions. Cut Hazard 5. Place the work bowl cover on the work bowl with the feed tube just Handle blades carefully. to the left of the work bowl Failure to do so can result in handle. Grasp the feed tube and cuts. turn the cover to the right until it locks into place. Before First Use Before using your Food Processor for the first time, wash the work bowl, work
ページ11に含まれる内容の要旨
Preparing the Food Processor for Use 7. Plug the power cord into an Reversible Slicing/Shredding electrical outlet. Disc Assembly NOTE: Your Food Processor will not 1. Grasp the disc with fingers away operate unless the work bowl and from slicing and shredding blades. work bowl cover are properly locked Use care; blades are sharp. on the base. 2. Fit center opening of the disc over Do not remove the work bowl from the disc stem. Turn the stem the base without first removing the counterclockwis
ページ12に含まれる内容の要旨
Preparing the Food Processor for Use 3. To remove the mini bowl after processing, lift the bowl using the WARNING two finger grips located along the Cut Hazard top edge of the bowl. Handle blades carefully. Failure to do so can result in cuts. Mini Bowl and Mini Blade Assembly 1. Place the mini bowl inside the work bowl over the power shaft. Rotate the mini bowl until it falls into place. Citrus Press Assembly and Use 1. Position and lock the work bowl on the base. 2. Place the strainer baske
ページ13に含まれる内容の要旨
Preparing the Food Processor for Use 5. Open the lid and place the cone 9. Operate the citrus press by inside the strainer basket, over the pressing the On button or the power shaft. It may be necessary to Pulse button. rotate the cone until it falls into 10. When juice is fully extracted, press place. the Off button. NOTE: Do not exceed the maximum liquid level line on the work bowl, or juice will leak from the bowl. 11. Unlock the strainer basket by turning it clockwise. Remove juiced fruit,
ページ14に含まれる内容の要旨
Off On Pulse Using the Food Processor Turning the Food Processor On and Off WARNING 1. To turn on the Food Processor, press the On button. The unit will run continuously and the indicator light will glow. Rotating Blade Hazard Always use food pusher. Keep fingers out of openings. Keep away from children. Failure to do so can result in amputation or cuts. 2. To stop the Food Processor, press the Off button. The indicator light Before Use will go out and an automatic Before operating the Food Pr
ページ15に含まれる内容の要旨
Disassembling the Food Processor WARNING Cut Hazard Handle blades carefully. Failure to do so can result in cuts. 1. Turn the work bowl cover to the left and remove. 4. Turn the work bowl to the left to unlock it from the base. Lift to remove. 2. If using the disc, remove it before removing the bowl. Place two fingers under each side of the disc, and lift the disc and stem out of the work bowl. 5. The multipurpose blade can be removed from the work bowl before the contents are emptied. The blad
ページ16に含まれる内容の要旨
Off On Pulse Cleaning the Food Processor 5. To prevent damage to the bowl interlock system, always store the WARNING work bowl and work bowl cover Cut Hazard in the unlocked position when not in use. Handle blades carefully. Failure to do so can result in cuts. 1. Press the Off button. 2. Unplug the Food Processor before cleaning. 3. Wipe the base and cord with a warm, sudsy cloth, and wipe clean with a damp cloth. Dry with a soft cloth. Do not use abrasive cleansers or scouring pads. 4. All t
ページ17に含まれる内容の要旨
Troubleshooting • If your Food Processor should • If your Food Processor shuts off fail to operate, check the while it is running: following: – The Food Processor may be – Make sure the work bowl and the overheated. If the motor exceeds a work bowl cover are properly certain temperature, it will locked on the base. automatically shut off to prevent – Check that the Food Processor is damage. This should be an plugged into a proper electrical extremely rare occurrence. If it outlet. If it is, unpl
