ページ1に含まれる内容の要旨
User Manual
Model: G7-630
www.a4tech.com
ページ2に含まれる内容の要旨
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonabl
ページ3に含まれる内容の要旨
Knowing the Product Far Range Up to 15 Meters X-Far Wireless range ensures more operation freedom. (Note: Actual operating distance may vary and depend on working environments) 3 Shiftable Report Rates for power saving, Ensures No Lag Response Instantly shifts mouse report rate between 8/4/2 ms for power saving and delivers smooth, accurate cursor control. 8 Gestures in Right Button The mouse allows you get 8 functions on “Right” button. Battery Status Indicator Aware of the battery power anytim
ページ4に含まれる内容の要旨
3. Insert the supplied battery, make sure that the positive (+) and negative (-) ends of the battery match the polarity indicators inside the battery housing. Power Management of the Mouse 1. To power on the mouse, switch the power button to “ON” position. 2. To turn off the mouse power, switch the power button to “OFF“ position. Note: The mouse can be awaked easily by moving the mouse randomly if long time no using. The wireless mouse is plug-and-play. No driver is required. If you would like t
ページ5に含まれる内容の要旨
5. To launch the software, double click the icon on your desktop or go to Start—Programs—A4tech 8 in Right, then the icon will appear in the taskbar at the right corner of your screen. Software Instructions A. How to get 8 functions in right button of the mouse
ページ6に含まれる内容の要旨
From the “task pull-down” menu of each arrow direction, you can select “keyboard, mouse, office sets, key combinations, multimedia and internet” 6 main function categories and there are more than 30 different functions that are ready for your immediate selection. Task Pull-down Menu B. How to Pair the X-Far Wireless Devices
ページ7に含まれる内容の要旨
The G5/G7/G9 mouse series have been preset the ID Code in the factory. But under the circumstances you lose receiver or want to use with the other receiver in the same product series, you need to refresh the ID Code before using it. Step 2: Press “Start Pair ID” to refresh Step 1: Right click on the icon in ID Code. the taskbar and select “Pair ID Program” Step 3: Remove the mouse batteries and insert again in 15 seconds ， 6 digits of matching code will be displayed on the menu as shown “Mouse P
ページ8に含まれる内容の要旨
C. How to Indicate Battery Status All of G7 series have Battery status Indicator in the software, click “ ”in the main menu of the software, then the battery power status will be displayed on the screen. It is convenient that you can easily be aware when the battery power is low and change battery in time. Smart Mouse Battery Low Warning Remind you to replace the battery right away when Figure. A will pop up in the right corner of your screen Mouse Mouse Battery Working Display Low Voltage Warni
ページ9に含まれる内容の要旨
1.0~1.05 25% V D. Three Shiftable Report Rates There are 3 report rates can be preset for high sensitive response time of 2/4/8 milliseconds, it improves cursor delay and jumping problems of wireless mouse, saves power in working and increases accuracy playing the games. Mouse Suitable Response Time Report Rate Range 500Hz 2ms Game 250Hz 4ms Photo design 125Hz 8ms Office F. Set RF Channel to Avoid Wireless Interference In case there are many wireless mice working in the adjacent area, you may se
ページ10に含まれる内容の要旨
Step 2: Tick “Channel Lock“ and Step 1: Right click on the icon in distribute each mouse a different channel. the taskbar and select “RF Channel Setting” Notice: To ensure that your mouse and keyboard send and receive perfectly, please read below instructions for your reference: 1. Interference from iron panel of PC. To get optimal performance, please plug the Nano-receiver into ③ 、 ④ to avoid shielding wireless signal when placing at ① 、 ②. ①②③④ USB Ports 2. Use USB extension wire to position t
ページ11に含まれる内容の要旨
electromagnetism interference from devices which don’t pass safety standard. 3. Avoid using the wireless mouse on a metal surface. Metals such as iron, aluminum, or copper shield the radio frequency transmission and slow down the mouse’s response time or cause the mouse to fail temporarily. The radio frequency is 2.4HZ, it is safe for our bodies, but please be cautious in using cardiac pacemaker or other body auxiliary instruments. Troubleshooting If the mouse is not working: 1. Make sure the mo
