ページ1に含まれる内容の要旨
Ericsson W20
Fixed Wireless Terminal for WCDMA/HSDPA
Mobile Networks
User's Guide
ページ2に含まれる内容の要旨
Ericsson W20 Fixed Wireless Terminal for WCDMA/HSDPA Mobile Networks User's Guide . Copyright © Ericsson Enterprise AB 2006 - All Rights Reserved Disclaimer No part of this document may be reproduced in any form without the written permission of the copyright owner. The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of any kind resulting from
ページ3に含まれる内容の要旨
. Contents 1 Introduction 1 1.1 Structure of this Guide 1 1.2 Product Overview 1 1.2.1 Indicators and Connectors 2 2 Configuration and Management 5 2.1 Accessing Internal Web Pages 5 2.2 Overview Page 6 2.2.1 Changing Password 6 2.2.2 Alarms 7 2.2.3 Network Information 8 2.3 Configuration Wizard 9 2.3.1 Internet Access 9 2.3.2 Wireless LAN Access 11 2.4 Internet 18 2.4.1 Traffic Statistics 19 2.4.2 Authentication 20 2.5 LAN 22 2.5.1 Connected Devices 23 2.5.2 Traffic Statisti
ページ4に含まれる内容の要旨
Contents 2.8.1 UPnP IGD 31 2.8.2 Application Level Gateways 32 2.8.3 Port Forwarding 32 2.9 File and Printer Sharing 34 2.9.1 File Sharing 35 2.9.2 Printer Sharing 35 2.10 System 36 2.10.1 Configuration Backup and Restore 37 2.10.2 Reboot 37 2.10.3 Software Upgrade 37 2.11 Event Log 39 3 PC Configuration 41 3.1 IP Settings 41 3.1.1 Obtaining IP Settings Automatically 41 3.1.2 Configuring Static IP Address 43 3.2 Wireless LAN Settings 43 3.2.1 Siting the Wireless PC 43 3.2.2 Ins
ページ5に含まれる内容の要旨
Contents 4.7 Slow or Intermittent Wireless LAN Connection 53 4.8 No Access to Shared Files or Network Printer 54 Glossary 55 1/1551-CRH 102 167 PA15 2006-08-16 v
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Introduction 1 Introduction This chapter describes the structure of this guide and gives a brief product overview. 1.1 Structure of this Guide This User’s Guide contains information that is needed to configure and manage the Ericsson W20 Fixed Wireless Terminal (FWT). The following chapters are included: • Chapter 1 – “Introduction” – provides information about this guide and gives a brief product overview. • Chapter 2 – “Configuration and Management” – provides detailed information
ページ8に含まれる内容の要旨
Introduction • File and Printer Sharing Network storage and printing are supported through USB connection of up to two mass storage devices and one printer at the same time. • Local Wireless Access with High-level Security The Ericsson W20 is a WLAN access point for the wireless local network including WEP, WPA, and WPA2 with pre-shared keys for WLAN security. UMTS/GSM WLAN Ethernet USB Figure 1 Example of Ericsson W20 Setup For more information about the E
ページ9に含まれる内容の要旨
Introduction Table 1 Front Panel Indicators Text Status Description Power Green Power is on. Unlit Power is off. Mobile Network Green The UMTS network is available. Yellow The GSM network is available. Flashing Searching for a connection. Unlit No connection to the mobile network. Internet Green Connection to Internet established. Unlit No Internet connection. Wireless LAN Green The wireless LAN is active The wireless LAN is inactive. Alarm Red Error. Various error conditions a
ページ10に含まれる内容の要旨
Introduction A description of each connector is provided in the table below (from left to right): Table 2 Connectors Label Description Power input for connecting the power supply adapter. 10-28 VDC Reset Button used to restore the Ericsson W20 configuration to factory default settings. The following procedure resets all configurable values back to factory default, including the Ericsson W20 login user name and password. 1. Disconnect the power cable from the Ericsson W20. 2. Pre
ページ11に含まれる内容の要旨
Configuration and Management 2 Configuration and Management Follow the instructions in the Quick Installation Guide to install the Ericsson W20. When the installation is finished, the Ericsson W20 internal web pages are available for configuration and status control. This chapter provides detailed information about configuration and management of the Ericsson W20. 2.1 Accessing Internal Web Pages Start a web browser and type http://192.168.1.1 in the Address (URL) field. The Ericsson
ページ12に含まれる内容の要旨
Configuration and Management Figure 4 Overview page The left-hand menu includes configuration topics described one by one in the following sections. Apart from the links menu to the left, each web page includes a Logout link to make it possible to log out whenever it is desired. 2.2 Overview Page The Overview page includes the possibility to change password, the entrance to the Configuration Wizard, see section 2.3 – “Configuration Wizard”, alarm information, and basic network inform
ページ13に含まれる内容の要旨
Configuration and Management Figure 5 Change Password page 2. Type the old password in the Current Password field. If it is the first time you change password, the old password is user. 3. Type the new password in the New Password and Retype New Password fields. Note: The password is case-sensitive (distinguish between uppercase and lowercase letters) and can include up to eight characters (letters and/or numbers). 4. Click OK . 2.2.2 Alarms Alarms are generated when it
ページ14に含まれる内容の要旨
Configuration and Management SIM card permanently The SIM card cannot be unblocked. A locked new SIM card is required. Alarm detection not The Ericsson W20 alarm detection working function is not working. Unknown alarm The Ericsson W20 cannot identify the alarm. For information about how to react on an alarm, see section 4 – “Trouble- Shooting”. 2.2.3 Network Information The Network Information section on the Overview page includes a selection of the Internet and LAN settings a
ページ15に含まれる内容の要旨
Configuration and Management 2.3 Configuration Wizard The Configuration Wizard guides you step by step through the basic setup of the mobile network connection and optionally for the wireless LAN access point. Click Configuration Wizard on the Overview page to start the wizard. The first page of the wizard; WAN Access: SIM Authentication is displayed: Figure 6 WAN Access: SIM Authentication page 2.3.1 Internet Access The first part of the Configuration Wizard includes Internet aut
ページ16に含まれる内容の要旨
Configuration and Management If three attempts have been made with the wrong PIN, the SIM card is blocked. The PUK is required to unblock the card. Click the Unlock SIM link. The Unlock SIM page is displayed: Figure 7 Unlock SIM page Type the PUK in the PUK field and type a new PIN in the New PIN and Retype new PIN fields. Click OK . The Overview page is displayed. Note: If ten attempts have been made with the wrong PUK, the SIM card is permanently blocked. A new SIM card is required.
ページ17に含まれる内容の要旨
Configuration and Management PPP User Authentication The PPP (Point-to-Point Protocol) Internet mode may require individual user authentication. Figure 9 WAN Access: PPP User Authentication page Fill in the PPP user name and PPP password fields on the WAN Access: PPP User Authentication page. Click Next to proceed. 2.3.2 Wireless LAN Access The second part of the Configuration Wizard includes configuration of the Wireless LAN (WLAN). A Wireless LAN is a local network that communi
ページ18に含まれる内容の要旨
Configuration and Management To enable connection of one or more wireless devices to the Ericsson W20, select the Enable WLAN check box on the Wireless LAN: WLAN Access Point page and click Next to proceed. If you are not going to set up any wireless LAN, just click Next on the Wireless LAN: WLAN Access Point page. The last page of the wizard, where you can review and confirm your settings, is displayed: Figure 11 Confirm page Check the information on this page and click Finish
ページ19に含まれる内容の要旨
Configuration and Management Channel Selection The maximum number of regulatory channels to use for wireless communication is 13. Available channels depend on local regulations. You can select one of the available channels yourself, or let the Ericsson W20 automatically select a channel. Figure 13 Wireless LAN: Radio Channel page Select either Auto or a channel number from the Radio Frequency Channel list on the Wireless LAN: Radio Frequency Channel page. Click Next to proceed. N
ページ20に含まれる内容の要旨
Configuration and Management name in the Network name (SSID) field on the Wireless LAN: Network Name page. If the SSID broadcast option is enabled, your local wireless device(s) will find the network name when scanning the air. If the option is disabled, the network name is hidden and has to be manually provided to the wireless device(s). To disable network name broadcast, clear the Enable SSID broadcast check box on the Wireless LAN: Network Name page. Click Next to proceed. Authenti
