ページ1に含まれる内容の要旨
BIPAC 7100SV
VoIP ADSL Modem/Router
with Single Ethernet Port
User Manual
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Table of Contents Chapter 1.............................................................................. 1 INTRODUCTION .........................................................................................1 1.1 An Overview of BIPAC 7100SV ..................................................................................1 1.2 Package Contents.......................................................................................................2 1.3 BIPAC 7100SV Features................
ページ4に含まれる内容の要旨
Billion BIPAC 7100SV VoIP ADSL Router 3.4.3.3.6 Ring Tone...............................................................................................36 3.4.3.3.7 Timer ......................................................................................................38 3.4.3.4 System ................................................................................................................................... 39 3.4.3.4.1 Password....................................................
ページ5に含まれる内容の要旨
Chapter 1 Introduction 1.1 An Overview of BIPAC 7100SV BIPAC 7100SV VoIP ADSL Modem/Router provides a high-speed Ethernet port for high-speed Internet browsing. It can support downstream transmission rates of up to 8Mbps and upstream transmission rates of up to 1024Kbps. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.lite (G992.2); G.hs (G994.1)). The product supports PPPoA (RFC 2364 – PPP (Point-to-Point Protocol) over ATM Adaptation Layer 5), RFC 1
ページ6に含まれる内容の要旨
Billion BIPAC 7100SV VoIP ADSL Router between the PSTN world and the IP world acting as a residential gateway, eventually providing Internet Telephony capability. Cost savings and ease of developing and integrating new services motivate most of the interest in Internet telephony. Internet telephony integrates a variety of services provided by the current Internet and the PSTN infrastructure. BIPAC 7100SV extracts the maximum benefit from Voice over IP (VoIP) technology. It interfaces analo
ページ7に含まれる内容の要旨
Chapter 1 Introduction Dynamic Domain Name System (DDNS): The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname. This dynamic IP address is the WAN IP address. For example, to use the service, you must first apply an account from this free Web server http://www.dyndns.org/. There are more than 5 DDNS servers supported. PPP over Ethernet (PPPoE): Provides embedded PPPoE client function to establish a connection. Users can get greater access speed without ch
ページ8に含まれる内容の要旨
Billion BIPAC 7100SV VoIP ADSL Router 1.4 BIPAC 7100SV Application 4
ページ9に含まれる内容の要旨
Chapter 2 Using Billion VoIP ADSL Modem/Router 2.1 Cautions for Using Billion VoIP ADSL Modem/Router Do not place the router under high humidity and high temperature. Do not use the same power source for the device with other equipment. Do not open or repair the case yourself. If the device is too hot, turn off the power immediately and have a qualified serviceman repair it. Avoid using this product and all accessories outdoors. Place the product on the stable surface. Only use the p
ページ10に含まれる内容の要旨
Billion BIPAC 7100SV VoIP ADSL Router 2.3 The Rear Ports LED Meaning Power Switch A Power ON/OFF switch Power Jack Connect the supplied power adapter to this jack. Reset Press it to restore the factory default setting back. Connect RJ-11 cable to this port when connecting to an analog phone VoIP set. Connect the supplied Ethernet cable to this port when connecting to a LAN NIC (Network Interface card) in PC. (RJ-45 Connect an UTP Ethernet cable to this port when connecting to a
ページ11に含まれる内容の要旨
Chapter 3 Configuration BIPAC 7100SV can be configured with your Web browser. The web browser is included as a standard application in following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me/XP, etc. The product provides a very easy and user-friendly interface for configuration. 3.1 Before Configuration This section describes the configuration required by LAN-attached PCs that communicate with BIPAC 7100SV, either to configure the device, or for network access. These
ページ12に含まれる内容の要旨
Billion BIPAC 7100SV VoIP ADSL Router 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 8
ページ13に含まれる内容の要旨
Chapter 3 Configuration 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double- click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 9
ページ14に含まれる内容の要旨
Billion BIPAC 7100SV VoIP ADSL Router 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 10
ページ15に含まれる内容の要旨
Chapter 3 Configuration 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. Configuring PC in Windows 95/98/ME 1. Go to Start / Settings / Control Panel. In the Control Panel, double- click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3. Click Properties. 11
ページ16に含まれる内容の要旨
Billion BIPAC 7100SV VoIP ADSL Router 4. Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button. 5. Then select the DNS Configuration tab. 6. Select the Disable DNS radio button and click OK to finish the configuration. 12
ページ17に含まれる内容の要旨
Chapter 3 Configuration Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double- click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 13
ページ18に含まれる内容の要旨
Billion BIPAC 7100SV VoIP ADSL Router 3. Select the Obtain an IP address from a DHCP server radio button and click OK. 3.2 Factory Default Settings Before you configure this device, you need to know the following default settings. 1. Web Configuration Password: There are two levels of password protection, Administrator Level and User Level. User Name Password Administrator Level admin password User Level user password 2. Device IP Network settings in LAN site IP Address: 192.168.1
ページ19に含まれる内容の要旨
Chapter 3 Configuration 3.2.1 Password The default username and password are admin and password respectively. If you ever forget the password to log in, you may press the RESET button up to 2 seconds to restore the factory default settings. 3.2.2 LAN and WAN Port Addresses The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below. LAN Port WAN Port IP address 192.168.1.254 Subnet Mask 255.255.255.0 Obtain an IP address DHCP server functi
ページ20に含まれる内容の要旨
Billion BIPAC 7100SV VoIP ADSL Router VPI/VCI, VC-based/LLC-based multiplexing, IP address, Subnet mask, IPoA Gateway address, and Domain Name System (DNS) IP address (it is fixed IP address). 3.4 Configuring with Web Browser The ADSL Modem/Router can be configured with your Web browser. The web browser is included as a standard application in following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me/XP, etc. The product provides a very easy and user-friendly interfac
