ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating 14. Non-use Periods The power cord of the appliance instructions should be read before this product is should be unplugged from the outlet when left unused operated. for a long period of time. 2. Retain Instructions The safety and operating 15. Object and Liquid Entry Care should be taken so that instructions should be retained for future reference. objects do not fall and liquids are not spilled int
ページ3に含まれる内容の要旨
FEATURES • Compact design • User replaceable crossfader • 2 phono, 2 line, 1 microphone input • Gain, Treble, and Bass Controls on Channels • Powerful stereo headphone output Cue Pan Selector (Ch.1-Ch.2) • • Bright LED Output Indicators • Selectable Fader Start (Ch.1-CH.2) MIXER FEATURES 6 4 11 10 9 3 2 1 5 7 8 MIC
ページ4に含まれる内容の要旨
MIXER FEATURES 1. Input fader - Controls individual source levels (channels) in the mix. 2. Input toggle switch - Selects which source will be active based on what you have connected to the rear panel input section (phono/line). 3. Treble and Bass EQ - Adjusts the high and low frequency levels of the input channels for good sound. 4. Channel Gain - Adjusts the pre-fader volume for cleaner sound. 5. Replaceable Crossfader - Achieves clean fades between the two input channels. "Hard lef
ページ5に含まれる内容の要旨
QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your m
ページ6に含まれる内容の要旨
SPECIFICATIONS SENSITIVITY OF INPUT (LEVEL/IMPEDANCE): LINE -14dB/47K OHM ±3dB PHONO -50dB /47K OHM ±3dB MIC -54dB /6K OHM ±3dB OUTPUT (LEVEL/IMPEDANCE): MASTER (RCA) 0dB/47K OHM ±3dB PHONES (LOAD=32 OHM) -3dB/33 OHM ±3dB MAX. OUTPUT (LOAD=47K, THD=5%) MASTER (RCA) MORE THAN 18dB (8V) PHONES (LOAD=32 OHM) MORE THAN 5dB (1.8V) CHANNEL BALANCE WITHIN 3dB FREQUENCY RESPONSE: LINE 20-20KHz ±3dB PHONO 20-20KHz +2, -3dB (RIAA) MIC 50-20KHz +2/-3dB OUTPUT NOISE (IEC-A WE
ページ7に含まれる内容の要旨
Stanton Magnetics, Inc. – Warranty Provision – Returns for Repairs or Replacement WARRANTY Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one (1) year following the date of original purchase. E
ページ8に含まれる内容の要旨
cut along dotted line STANTON WARRANTY REGISTRATION CARD If you have internet access, please register your product at www.stantondj.com. Otherwise, return this card completely filled out in order to validate your warranty. PERSONAL INFO Name Address City State Zip Country Telephone PRODUCT INFO Model Number Serial Number Date of Purchase Where did you buy this product?
ページ9に含まれる内容の要旨
PLACE STAMP HERE Stanton Magnetics, Inc. 3000 SW 42nd Street Hollywood, FL 33312 U.S.A.
