ページ1に含まれる内容の要旨
MODEL H8172
CEMENT MIXER
OWNER'S MANUAL
COPYRIGHT © APRIL, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR9030 PRINTED IN CHINA
ページ2に含まれる内容の要旨
����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ���������������������������������������������������������������
ページ3に含まれる内容の要旨
Table of Contents INTRODUCTION ............................................................................................................................... 2 Foreword .................................................................................................................................... 2 Machine Data Sheet ................................................................................................................... 2 Contact Info .............................................
ページ4に含まれる内容の要旨
INTRODUCTION Foreword Contact Info If you have any comments regarding this manual, We are proud to offer the Model H8172 Cement please write to us at the address below: Mixer. This machine is part of a growing Grizzly family of fine machinery. When used according Grizzly Industrial, Inc. to the guidelines set forth in this manual, you can C /O Technical Documentation Manager expect years of trouble-free, enjoyable operation P.O. Box 2069 and proof of Grizzly’s commitment to customer Belli
ページ5に含まれる内容の要旨
� � � �� � �� � �� � � � �� � � � �� � � � �� � � �� � � � � � � �� � � � �� � � � � � � �� � � �� � � � � � �� � � � � ��� � � � � � � � � �� � � � �� � � � � � � � � � �� � � � � � � �� � �� � � � � � �� � � � � � � �� � �� � �� � � � � � � �� � �� �� � � � � � � � � �� � �� � � � � � � � �� � � � � � � ���� � � � � �� � � � � �� � � � �� � � � � � �� �� � �� �� � � � � � �� � �� � � � � � � �� � � �� � � � � � �� � � � � �� � � � � � � � �� � �� � � � � � �� � � �� � � � � �� � �� � � � � � �
ページ6に含まれる内容の要旨
� � � � � �� � � � � � � �� � � � �� � � �� � � � � � � � � � ��� ����� ������ �������� ���� ���� � ���� � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� ���������� ����� �� ������ ��� ��������� ���� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � ����� ���� ���������� ��������� ������� ���� � ���������� ������������� ���� ����� ���� �������� ���� ���������� �� � ����������� ���� � � � � � � � � � � � � � � � � � � � � � � �
ページ7に含まれる内容の要旨
Additional Safety for Cement Mixers 1. HAZARDOUS DUST. All cement, mortar, 5. ENTANGLEMENT. The spinning drum and grout, and silicate dusts are hazardous engaging gears present an entanglement to respiratory systems. Protect yourself hazard. When using the cement mixer, tie and any bystanders by always wearing a back long hair, roll up long sleeves, and respirator approved to guard against these remove loose clothing or jewelry to reduce kinds of dusts. the risk of an entanglement injury.
ページ8に含まれる内容の要旨
SECTION 2: CIRCUIT REQUIREMENTS Circuit Recommendations 110V Operation We recommend connecting your machine to a dedicated and circuit that is rated for the amper- age given below. Never replace a circuit breaker on an existing circuit with one of higher amper- age without consulting a qualified electrician to Serious personal injury could occur if you ensure compliance with wiring codes. If you are connect the machine to the power source unsure about the wiring codes in your area or befor
ページ9に含まれる内容の要旨
SECTION 3: SETUP Setup Safety Unpacking Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you This machine presents discover the machine is damaged, please imme- serious injury hazards diately call Customer Service at (570) 546-9663 to untrained users. Read for advice. through this entire manu- al to become familiar with Save the containers and all packing materials for the controls and opera- possibl
ページ10に含まれる内容の要旨
Hardware Qty Inventory Hairpin Cotter Pin (Wheels) .............................. 2 Hex Bolts M8-1.25 x 65 (Leg to Frame) ............ 2 Flat Washers 8mm (Leg to Frame) ................... 2 After all the parts have been removed from the Lock Washers 8mm (Leg to Frame) ................. 2 carton, you should have: Hex Nuts M8-1.25 (Leg to Frame) .................... 2 Hex Bolt M6-1 x 25 (Plunger Rods) .................. 1 Main Components (Figures 1 & 2) Qty Lock Nut M6-1 (Plunger Rods) .........
ページ11に含まれる内容の要旨
3. Connect the upper and lower plunger rods Assembly together with an M6-1 x 25 hex bolt and M6- 1 lock nut, then insert the cotter pin where shown in Figure 5. Bend each leg of the cot- ter pin outward so it can't fall out. To assemble the cement mixer: 1. Insert the wheels on the axles and secure ����� them in place with the hairpin cotter pins, as ����������� shown in Figure 3. �������� ��������� ������������ �������� ���� ������� ����� ���������� ����������� ���������� ����� Figure 5. Pl
ページ12に含まれる内容の要旨
5. With the help of another person, place the 7. Place the upper bracket over the pivot shaft, lower drum on the frame assembly, as shown and attach the upper bracket to the frame in Figure 7. The gear guard MUST remain with two M8-1.25 x 20 hex bolts on one side installed on the lower drum. If, for any rea- and two 8mm flat washers, lock washers, and son, it is not installed in the location shown in hex nuts on the other side (Figure 9). Figure 7, then install it now. Gear Guard Figure 9. U
ページ13に含まれる内容の要旨
9. Place the upper drum on the lower drum with 11. Slide the motor assembly onto the bearing the gasket between them. Align the arrows block shaft, then secure the motor assembly shown in Figure 11, and secure the upper to the frame (Figure 13). Use two 8mm flat and lower drum pieces together with ten M8- washers, lock washers, and hex nuts on the 1.25 x 20 hex bolts, 8mm lock washers, and motor assembly studs. Slide the remaining 8mm flat washers. M8-1.25 x 65 hex bolt through the motor
ページ14に含まれる内容の要旨
SECTION 4: OPERATIONS Operation Safety Operation Tips Follow the tips below when using the cement mixer: Damage to your eyes and lungs could result • Before using your cement mixer, coat the from using this machine without proper pro- inside of the mixing drum with a light layer of tective gear. Always wear safety glasses and oil. Refer to Lubrication on Page 13 for more a respirator when operating this machine. details. • Spray the inside surface of the cement mixer with a small amount o
ページ15に含まれる内容の要旨
SECTION 5: MAINTENANCE Cleaning Always disconnect power to the machine before • Always unplug the cement mixer before performing maintenance. cleaning. Failure to do this may result in serious person- • Avoid getting water on the motor or switch al injury. while cleaning. If you do, allow the compo- nents to thoroughly dry before plugging in the motor. Lubrication • The easiest way to clean the drum is by hosing it out with water. (Cleaning is made Remove the gear cover/guard. Lubricat
ページ16に含まれる内容の要旨
Wiring Diagram �������� ������������� ����������������� ������������������ ������� ����� ��������������������������� ���������������� ����� ��� ���� ����� ������� ������� ����� ��������� ������ �������������������� Figure 16. Switch wiring. -14- H8172 Cement Mixer
ページ17に含まれる内容の要旨
Parts Breakdown � �� �� � �� �� � � � �� �� � �� �� �� � � � � �� �� � �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� � � �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� ���� �� �� �� �� �� �� �� �� �� �� �� �� �� H8172 Cement Mixer -15-
ページ18に含まれる内容の要旨
Parts Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH8172001 UPPER DRUM 37 PR15M EXT RETAINING RING 30MM 2 PB03M HEX BOLT M8-1.25 X 16 38 PR38M INT RETAINING RING 62MM 3 PH8172003 RUBBER GASKET 39 PH8172039 DUSTPROOF COVER 4 PFH28M FLAT HD SCR M8-1.25 X 10 40 PHTEK2M TAP SCREW M3.5 X 16 5 PH8172005 BIG COGWHEEL 41 PH8172041 SWITCH 6 PH8172006 LOWER DRUM 42 PH8172042 GASKET 7 PH8172007 UPPER BRACKET 43 PH8172043 STRAIN RELIEF BOLT 8 PB09M HEX BOLT M8-1.25 X 20 44 PH8172044 POWER CORD
ページ19に含まれる内容の要旨
Safety Labels Breakdown ��� ��� ��� ��� ��� ��� ��� ��� REF PART # DESCRIPTION REF PART # DESCRIPTION 101 PH8172101 MACHINE ID LABEL 105 PH8172105 SMALL EYE/LUNG LABEL 102 PH8172102 SMALL DISCONNECT PWR LABEL 106 PH8172106 SMALL READ MANUAL LABEL 103 PH8172103 SMALL DRUM PINCH LABEL 107 PH8172107 MOTOR/WATER SHOCK LABEL 104 PH8172104 LARGE DRUM PINCH LABEL 108 PPAINT-1 GRIZZLY GREEN TOUCH-UP PAINT Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUS
ページ20に含まれる内容の要旨
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any par- ticular purpose, are hereby limited to