ページ1に含まれる内容の要旨
Table of Contents
1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4
2. GENERAL INSTALLATION INSTRUCTIONS ......................................................................... 5
3. PREPARING THE BUILT–IN OVEN ....................................................................................... 6
4. MAKING THE ELECTRICAL CONNECTION .......................................................................... 7
NOTE: THIS APPLIA
ページ2に含まれる内容の要旨
Important Safety Instruction 1. IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS – Your safety and the safety of others are very important. We have provided many important safety messages throughout this manual and on the appliance. Read all instructions before using the appliance and always obey all safety messages. RECOGNIZE SAFETY INFORMATION This is a safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. UNDERSTAND SIGNAL WORDS A
ページ3に含まれる内容の要旨
Important Safety Instruction 2. GENERAL INSTALLATION INSTRUCTIONS � Proper installation is your responsibility. Have a qualified technician install this oven. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with installation guidelines specified on the model/serial ID plate. The model/serial ID can be found on the internal frame of the oven when the door is opened. � Have your oven installed and properly grounded by a qualifie
ページ4に含まれる内容の要旨
Instructions for the Installer 3. PREPARING THE BUILT–IN OVEN EXCESSIVE WEIGHT HAZARD - Use two or more people to move and install the oven WARNING - Failure to do so can result in back or other injury. IMPORTANT: This appliance must be integrated in any cabinets made of material which is heat resistantup to temperatures of 194°F-90°C. Keep to the dimensions indicated in pictures 1, 2, 3. For under-worktop positioning, keep to the dimensions indicated in pictures 1 and 3. For column positionin
ページ5に含まれる内容の要旨
Instructions for the Installer 4. MAKING THE ELECTRICAL CONNECTION ELECTRICAL SHOCK HAZARD WARNING - Disconnect power to the junction box before connecting - Electrically ground the appliance with green or green-yellow wire FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH, FIRE OR ELECTRICAL SHOCK. This appliance is manufactured with a yellow-green or green ground wire connected to the oven chassis. To prepare the connection between the oven and the junction box: - Disconnect the p
ページ6に含まれる内容の要旨
Instructions for the Installer US INSTALLATION ONLY – 3 WIRE BRANCH CIRCUIT Refer to figure 1, where local codes allow the connection of the ground wire from the applliance to the branch circuit neutral wire (white wire): - The ground wire must be connected first; - If local codes permit, connect the green or yellow-green ground wire from the appliance and the white wire from the appliance to the UL/CSA branch circuit neutral wire (white wire). listed wire connector - Connect the red and black l
