ページ1に含まれる内容の要旨
DE7711
7711-Cover.auto.fm Page 1 Tuesday, August 24, 2004 1:46 PM
12V DC
Microwave
Oven
Installation and Owner’s Manual
DE7711N
CODE NO. : DE68-03008A
ページ2に含まれる内容の要旨
7711-Safety.auto.fm Page 2 Tuesday, August 24, 2004 1:46 PM SAFETY PRECAUTIONS TO IMPORTANT SAFETY AVOID POSSIBLE INSTRUCTIONS EXPOSURE TO When using any electrical appliance, basic safety precautions should be EXCESSIVE followed, including the following: MICROWAVE ENERGY: WARNING (a) Do not attempt to operate this oven with To reduce risk of burns, electric shock, the door open since open-door operation fire, personal injury or exposure to can result in harmful exposure to exces
ページ3に含まれる内容の要旨
7711-Safety.auto.fm Page 3 Tuesday, August 24, 2004 1:46 PM SAFETY Important Safety Instructions, continued Do not operate this appliance if it has a Carefully remove container coverings, damaged Power cable, if it is not working directing steam away from hands and face. properly, or if it has been damaged or Do not operate any other heating or cooking dropped. appliance beneath appliance. This appliance should be serviced only by Do not mount unit over or near any portion of
ページ4に含まれる内容の要旨
7711-Safety.auto.fm Page 4 Tuesday, August 24, 2004 1:46 PM SAFETY General Safety Requirements WARNING Safety Requirements: If safety requirements If the oven is not going to be in use for a long are not followed, it may result in an injury or period of time, disconnect it and store it in a a damage to the appliance. cool, well ventilated place. If the oven is going to be used and stored by another person, be sure to include the Precaution! Safety Owner’s Manual along with the mi
ページ5に含まれる内容の要旨
7711-body.auto.fm Page 5 Tuesday, August 24, 2004 1:52 PM CONTENTS Microwave Oven Installation Cooking Instructions ................... 15 Requirements .................................... 6 Cooking Utensils..........................................15 Testing Utensils ...........................................15 Requirements ................................................ 6 Cooking Techniques....................................16 Supplied Items .............................................
ページ6に含まれる内容の要旨
7711-body.auto.fm Page 6 Tuesday, August 24, 2004 1:52 PM MICROWAVE OVEN INSTALLATION REQUIREMENTS Requirements Installation The requirements for proper microwave oven Installation Location Tips operation are as follows: Before installing the oven, be sure to comply with • Operating Voltage: 12V DC the following: The installation location for the oven should be Breaking Voltage: Min. 11.5V, Max. 15.5V even, flat, and sturdy. Battery life must be at least 90Ah at 12V Do not allow
ページ7に含まれる内容の要旨
7711-body.auto.fm Page 7 Tuesday, August 24, 2004 1:52 PM MICROWAVE OVEN INSTALLATION REQUIREMENTS Installation(Continued) Take the oven’s weight into account. WARNING Check whether any protective measure such as a When installing the oven in a vehicle, make large support base is necessary or not. sure that the installation location is safe enough to avoid an injury. (including a vehicle’s sudden stop or acci- To determine hole location, refer to the dimensions dent). in Fig. 2 and
ページ8に含まれる内容の要旨
7711-body.auto.fm Page 8 Tuesday, August 24, 2004 1:52 PM MICROWAVE OVEN INSTALLATION REQUIREMENTS Installation(Continued) To make a hole in an accurate location, create a mark in advance with a hammer and punch. Smooth any rough edges on the holes and apply rust proof treatment to them. DE7711 Remove one screw securing outer panel of microwave oven (Right side) Attach left and right brackets to the outer panel using 8 screws(Fig.1) Secure the microwave oven brackets to the frame
ページ9に含まれる内容の要旨
7711-body.auto.fm Page 9 Tuesday, August 24, 2004 1:52 PM MICROWAVE OVEN INSTALLATION REQUIREMENTS Safety Requirements for Installation: Electrical Wiring The operating voltage should comply with the Connection Power Cable voltage specified in the label of the microwave oven Do not pull the power cable forcibly. type attached to the back of the appliance. Do not connect to a power supply other than 12V. Comply with the minimum diameter of the power cable as specified in the manual. W
ページ10に含まれる内容の要旨
7711-body.auto.fm Page 10 Tuesday, August 24, 2004 1:52 PM MICROWAVE OVEN INSTALLATION REQUIREMENTS Connecting the Power Cables to the Oven Install the power cable clamp required for the battery connection to the connection power cable. Do not connect the power cable to the battery yet. Bring the power cable close to the oven. Strip about 20mm of electric coating off the power cable wire. Be careful not to damage the wire. Remove the plastic cover from the b
ページ11に含まれる内容の要旨
7711-body.auto.fm Page 11 Tuesday, August 24, 2004 1:52 PM YOUR NEW MICROWAVE OVEN Checking Parts Setting Up Your Microwave Oven Unpack your microwave oven and check to make sure that you have all the parts shown here. If any 1 Once connected to the power supply the part is missing or broken, call your dealer. display on your oven will show: Make sure there is adequate ventilation for your oven by leaving at least 50mm of space behind, above, and to the side of the oven. Owner’s manual
ページ12に含まれる内容の要旨
7711-body.auto.fm Page 12 Tuesday, August 24, 2004 1:52 PM YOUR NEW MICROWAVE Control Panel Buttons Display Auto Reheat Button Time setting Buttons Press to set the cooking time. Cancel Button Press to correct a mistake. Start +30 s Button Press to start cooking and Press once for every 30 seconds of cooking time. Push Button 12 YOUR NEW MICROWAVE OVEN
ページ13に含まれる内容の要旨
7711-body.auto.fm Page 13 Tuesday, August 24, 2004 1:52 PM OPERATION Reheating Automatically Setting Cooking Times To reheat food, select the type of snack, and the This oven is preset at the factory for automatic microwave automatically sets the reheating time. operation. 1 Once connected to the power supply the 1 Press the Auto button repeatedly to select the display on your oven will show : 8888. type of snack you wish to reheat. The initial serving size for each dish is one serving. 2
ページ14に含まれる内容の要旨
7711-body.auto.fm Page 14 Tuesday, August 24, 2004 1:52 PM OPERATION Using the Start( ) +30 s Button Error Codes This is a ONE TOUCH COOK pad. By touching the pad once, you can start heating instantly for 30 seconds. Error Items Code Error Beep Cause/Remedy You can increase the cooking time by pressing the Low Low Batt. Voltage/ Voltage Check the Start() +30 s button during heating. Batt(Min. 11.5V) Cooking time increases by 30 seconds button with High High Batt. Voltage/ each press of the
ページ15に含まれる内容の要旨
7711-body.auto.fm Page 15 Tuesday, August 24, 2004 1:52 PM COOKING INSTRUCTIONS Cooking Utensils Recommended Use Not Recommended Glass and glass-ceramic bowls and dishes — Glass jars and bottles — Regular glass is too thin Use for heating or cooking. to be used in a microwave, and can shatter. Microwave browning dish — Use to brown the Paper bags — These are a fire hazard, except for exterior of small items such as steaks, chops, or popcorn bags that are designed for microwave pan
ページ16に含まれる内容の要旨
7711-body.auto.fm Page 16 Tuesday, August 24, 2004 1:52 PM COOKING INSTRUCTIONS Cooking Techniques Stirring Adding Moisture Stir foods such as casseroles and vegetables while Microwave energy is attracted to water molecules. cooking to distribute heat evenly. Food at the outside Food that is uneven in moisture content should be of the dish absorbs more energy and heats more covered or allowed to stand so that the heat quickly, so stir from the outside to the center. The disperses evenly.
ページ17に含まれる内容の要旨
7711-body.auto.fm Page 17 Tuesday, August 24, 2004 1:52 PM APPENDIX Troubleshooting Guide Care and Cleaning Before you call a repair person for your oven, Follow these instructions to clean and care for your check this list of possible problems and solutions. oven. Keep the inside of the oven clean. Food particles and spilled liquids can stick to the oven walls, causing the oven to work less efficiently. The oven does not work properly. Wipe up spills immediately. Use a damp cloth and
ページ18に含まれる内容の要旨
7711-Cover.auto.fm Page 2 Tuesday, August 24, 2004 1:46 PM Specifications Oven cavity 20 liter Operating Voltage 12V DC Breaking Voltage Min. 11.5V, Max. 15.5V Input Current 65A Power Consumption 750W Operating frequency 2,450MHz Output Power 450W (IEC-705) Main Fuse 32V DC, 100A Dimensions(WxHxD) Outside(mm) 490(W) X 282(H) X 351(D) Oven(mm) 306(W) X 190(H) X 348(D) Net/Gross Weight 10.5/12.5kg approx. ELECTRONICS Printed in Malaysia
