Audio-Technica AT4054の取扱説明書

ページ1に含まれる内容の要旨

AT4054
HANDHELD CARDIOID
CAPACITOR MICROPHONE
Description Operation and Maintenance
The AT4054 is a large-diaphragm, pressure-gradient capacitor Output is low impedance balanced. The output connector mates
microphone with a uniform cardioid polar pattern. The frequency with XLRF-type cable connectors. The balanced signal appears
response is smooth over an extended 60-20,000 Hz range. Based across Pins 2 and 3 while the ground (shield) connection is Pin 1.
on the same advanced technology used in

ページ2に含まれる内容の要旨

AT4054 † Specifications Optional Accessories: • AT8114 foam windscreen (slip-on). ELEMENT Externally polarized (DC bias) capacitor • AT8314 2-conductor, shielded, POLAR PATTERN Cardioid (Unidirectional) vinyl-jacketed, broadcast-type cable FREQUENCY RESPONSE 60-20,000 Hz with XLRF-type connector at microphone 1 end, XLRM-type connector at equipment OPEN CIRCUIT SENSITIVITY (1 kHz) –46 dB (5.0 mV) ± 2 dB, re 1V at 1 Pa* end. Available in 10', 20', 25', 30', 50' IMPEDANCE 200 ohms & 100' lengths.