ページ1に含まれる内容の要旨
In the event that you should require service for your Nikon RIFLESCOPE, in case
of U.S.A. market, please send it directly to:
Riflescope MONARCH X
Nikon Scope Service
841 Apollo Street, Suite 100
El Segundo, CA. 90245-4721
2.5-10x44 SF
1-800-Nikon SV.
In case of outside U.S.A. please bring it to dealer from which you purchased it.
2.5-10x44 SF IL
4-16x50 SF
Manufacturer:
3-25, Futaba 1-chome, Shinagawa-ku, Tokyo 142-0043, Japan
Tel:+81-3-3788-7697 Fax:+81-3-3788-7698
Printed in Japan (506B) 72-1
ページ2に含まれる内容の要旨
Congratulations on your choice of a Nikon RIFLESCOPE. Your new scope is the finest example of Nikon's rugged and durable construction and precision bright optics; important qualities for a serious shooter's riflescope. Whether you use your scope for hunting or for target shooting, the procedure for mounting is identical. You should acquire a set of high quality steel mounting rings which have a diameter of 30 mm. Follow the ring manufacturer's instructions for m
ページ3に含まれる内容の要旨
2. Specifications 3. Instructions Model 2.5-10x44 SF 2.5-10x44 SF IL 4-16x50 SF Model 2.5-10x44 SF 2.5-10x44 SF IL 4-16x50 SF (1) Battery Objective Tube Diameter (mm) Actual Magnification 52 58 2.5-10X 4-16X CAUTION: When installing batteries, make sure the firearm is unloaded. Use safe firearm handling practices at all time. (in) 2.05 2.29 Objective Diameter (mm) 44 50 Length (mm) 352 375 (1) Your Nikon Monarch X 2.5-10x44 SF Dual Illuminated Reticle is powered by one 3V lithium battery (CR203
ページ4に含まれる内容の要旨
(2) Focusing (1) Look through the eyepiece with your eye positioned about 10cm (4 in) away from the eyepiece lens (Fig. 3-1), and you will see the Nikoplex reticle (Fig. 3-2) or Milliradian Dot Non illuminated Reticle model Lock Ring Eyepiece Adjustment Eye Relief reticle (Fig. 3-3). (1) Be sure your eye is positioned within proper alignment and proper eye relief otherwise the view will "black out". (1) Point the objective end of the scope at the sky (Do not point at the su
ページ5に含まれる内容の要旨
(3) Magnification (1) The riflescope 2.5-10x44 SF have a variable magnification from 2.5 to 10x, 4-16x50 SF from 4 to 16x. (1) To change powers. just rotate the power selector ring until the desired magnification appears adjacent to the power index dot. (4) Adjustment and zero setting of the riflescope (1) Sighting through the riflescope, align the rifle with your aiming point on the target and shoot a trial round. If the bullet does not hit the aiming point, adjust the elevation and windage.
ページ6に含まれる内容の要旨
Note: Maintenance The windage and elevation scales of the riflescope 2.5-10x44 SF and 4-16x50 SF are calibrated in division of 1/4 minute of angle with a click at intervals of 1/4 minute of angle (one division). (1) Lens cleaning When adjusting the reticle to the point of aim, remember that one minute of angle equals approximately one inch (2.54 cm) at 100 yards (91.44 m). Therefore, if the impact point is (1) To remove dirt of fingerprint, soak gauze of lens cleaning paper (silicon-free paper
