ページ1に含まれる内容の要旨
DIRECTREC
DR-2000
Executive Kit
INSTRUCTIONS
Thank you for purchasing an Olympus
DIRECTREC.
Please read these instructions for information
about using the product correctly and safely.
Keep the instructions handy for future reference.
EN
ページ2に含まれる内容の要旨
Main Features This product is equipped with the following features. New and improved microphone system reduces extraneous sounds such as wind or machine noise created while recording and thus enabling a higher quality of sound recording than ever before. New design and location of buttons enable single-handed control without ever having to visually check the placement of function buttons. Directrec fits easily into your hand providing effortless control coupled with superb dictation experien
ページ3に含まれる内容の要旨
Table of Contents Introduction Identification of Parts ............................ 4 Minimum Requirement ......................... 5 Getting Ready Installing DSS Player Software ............ 6 Uninstalling DSS Player Software ........ 7 Using Online Help................................. 8 Let’s Get Started Connection to Your PC ......................... 9 Running DSS Player........................... 10 Window Names................................... 11 Using the Remote Edit Window ........ 12
ページ4に含まれる内容の要旨
Identification of Parts 1 1Built-in microphone 2Record/Play indicator light 3B (Programmable) button 6 2 (Record) 4Slide REC / 7 3 STOP/ PLAY/ 4 8 (Review) REV switch 5 5FF (Fast Forward) button 6NEW button 7A (Programmable) button 8REW (Rewind) button 9Built-in speaker 0C (Programmable) button !USB Cable 9 0 ! 4
ページ5に含まれる内容の要旨
Minimum Requirement Make sure that your computer meets the Minimum requirements listed below. Please check with your system administrator or your Olympus Professional Dealer. PC: IBM PC/AT compatible PC Operating System: Microsoft Windows Me/ 2000 Professional/ XP Professional,Home Edition CPU: Intel Pentium II class 333 MHz processor or faster (Processor 500 MHz or faster is recommended) RAM: 128 MB or more (256 MB or more is recommended) Hard drive space: 50 MB or more Drive: 2x or faster CD-R
ページ6に含まれる内容の要旨
Installing DSS Player Software Before you connect your Directrec to your PC, you must first install the DSS Player software. Make sure to exit all running applications, eject the floppy disk if you are using one, and logon as administrator if you are running Windows 2000/XP (Profes- sional only) on the network. Insert Olympus DSS Player CD into the CD-ROM drive. The installation program will start automatically. 1 If the installation program does not start automatically, browse your CD-ROM drive
ページ7に含まれる内容の要旨
Uninstalling DSS Player Software To uninstall any of the software components of the DSS player software installed on your PC, follow the steps below. Exit DSS Player program. 1 Click the [start] button on the taskbar. 2 Select [Add/Remove programs] from the [Control Panel]. A list of installed applications is displayed. 3 Select [Olympus DSS Player Pro], then click the [Change/Remove] button. 4 Proceed with the uninstallation according to the instructions on the screen. 5 .......................
ページ8に含まれる内容の要旨
Using Online Help For information on the DSS Player usage and features, refer to the online Help. To start online Help: • Click the [start] button, then select [All Programs], [Olympus DSS Player Pro], [Dictation Help]. • While DSS Player is running, select the [Help] menu, [Contents]. • While DSS Player is running, press F1 on the keyboard. ...................................................................................................................................... Note • For more infor
ページ9に含まれる内容の要旨
Connection to Your PC Be sure to install the DSS Player software before connecting the Directrec to the PC. However, if you do connect the Directrec before or during the software instal- lation, the “Add New Hardware Wizard” will appear. In this case, cancel the wizard by pressing the [Cancel] button in the wizard screen and then install or continue the installation of DSS Player software. Connecting to Your PC Using the USB Cable Connect the Directrec USB cable directly into the USB port or USB
ページ10に含まれる内容の要旨
Running DSS Player By default, connecting the Directrec to your PC will start the application auto- matically. Disabling automatic start Right-click the Device Detector icon in the System Tray in the lower right hand corner of the screen, then select “Settings 1 startup application”. Click [DSS Player Pro]. The check mark on [DSS Player Pro] disappears. 2 Manual start Start Windows. 1 Click the [start] button, then select [All Programs]. All program menus will be displayed. 2 Select [Olympus
ページ11に含まれる内容の要旨
Window Names Main Window(Windows XP) 1 4 2 3 * Main screen is displayed when DSS Player is started Massage Tray 1Playback Control Bar Provides the control buttons to play and stop dictation files. 2Dictation Tree View Displays the directory structure of the DSS, WAVE-format files stored on your PC’s hard disk. Recordings made using Directrec will be saved as a file in the Message Tray ( ) in the Dictation Folder ( ). 3Device Tree View Displays the directory structure of the Directrec. 4Dictation
ページ12に含まれる内容の要旨
Using the Remote Edit Window For enjoyable recording experience, use Directrec with the DSS Player software to record to your PC. The DSS Player can be configured to provide you with complete remote control over your recording session from the Directrec without the use of the PC mouse. Starting the [Remote Edit] window for the DSS Player main window Ensure Directrec is properly connected to your PC and then start the DSS Player. 1 DSS Player main window appears. From the DSS Player main window
ページ13に含まれる内容の要旨
ndow Starting the [Remote Edit] window without opening the DSS Player main window With a push of a button on the Directrec, you can set your PC to open the [Re- mote Edit] window directly without entering the DSS Player main window. From the DSS Player main window, click the [Tools] menu, select [Options...], then click the [Directrec] tab. 1 Check [Start Remote Edit window automatically when Dictation Module is launched] and then click the [OK] button. 2 The pre-settings are now complete. When
ページ14に含まれる内容の要旨
Direct Recording New Recording From the DSS Player main window, click the [File] menu, then select [New File], or 1 click the icon. [Remote Edit] window appears. Move the slide switch on the Directrec to the REC position or press the 2 2,3 (Record) button in the [Remote Edit] window to start recording. The red record/play indicator light on Directrec will become lit. Point the micro- phone at the sound source. Move the slide switch on the Directrec to the STOP position or press the 3 (Stop) b
ページ15に含まれる内容の要旨
Overwrite Recording You can overwrite a previous recording from any point within the file. Note that the overwritten recordings will be premanently erased. Make sure you are at the starting point of the recording to be overwritten. 1 Move the slide switch on the Directrec to the REC position or press the 2 (Record) button in the [Remote Edit] window. 2,3 The record/play indicator light on the Directrec will light up and Overwrite Recording will start. Move the slide switch on the Directrec to t
ページ16に含まれる内容の要旨
Direct Recording Insert Recording Additional recording can be inserted into a previously recorded file. Check ( )“Insert recording” box in the [Remote Edit] window. 1 Make sure you are at the right position in the file where recording insert 2 should take place. 3,4 While playing the file, move the slide switch on the Directrec to the REC 3 position or press the (Record) button in the [Remote Edit] window to start inserting an additional recording. The red record/play indicator light on Directr
ページ17に含まれる内容の要旨
Playback (Playing a Dictation File) Move the slide switch on the Directrec to the PLAY position or press the 1 (Play) button in the [Remote Edit] window to start playback. The green record/play indicator light on Directrec will become lit. 1,3 Adjust the volume slider in the [Remote Edit] window to the required 2 level. The recording will be played through the Directrec speaker. Move the slide switch on the Directrec to the STOP position or press the 3 (Stop) button in the [Remote Edit] window
ページ18に含まれる内容の要旨
Playing (Playing a Dictation File) Playback functions Various functions are available with Directrec and the [Remote Edit] window to playback a recorded file. Directrec playback functions Playback Operation How to Cancel functions Fast Forward Press the FF button once while Move the slide switch to a position other than the STOP position. (FF) stopped. ➥ The Directrec starts the operation of the set position. Press the REW button once while Rewind (REW) stopped. Cue (CUE) Hold the FF button wh
ページ19に含まれる内容の要旨
Save Recording To save the current recording, move the slide switch on the Directrec to the 1 STOP position or press the (Stop) button to stop recording. 2,3 Either press the NEW button on Directrec or click the icon on the 2 4 toolbar in the [Remote Edit] window. [File Save] window will appear to save the data. To save the file, either press the NEW button on Directrec or click the [Save] 3 button on the [Remote Edit] window. The recorded data will be saved. The Directrec is now available for
ページ20に含まれる内容の要旨
Microphone Sensitivity Microphone sensitivity is adjustable to meet recording needs. Select from the “Sensitivity” box either “Dictation” or “Conference” in the [Remote Edit] window. 1 Conference :The high-sensitivity mode suitable for recording the ambient sounds. Dictation :The low-sensitivity mode suitable for recording dictation. 1 ...................................................................................................................................... Note • If you want to recor
