ページ1に含まれる内容の要旨
Model: TP380
User Manual
Manuale d’uso
Manuel d’utilisation
Bedienungsanleitung
Manual de uso
Manual do usuário
Gebruikshandleiding
Bruksanvisning
1
ページ2に含まれる内容の要旨
PMR RADIO TRANSCEIVER MODEL: TP380 USER MANUAL INTRODUCTION Thank you for selecting the Oregon Scientific™ TP380 as your product of choice. This product is a portable, easy-to-use two-way radio transceiver that you can use to contact your family and friends at shopping malls, amusement parks, or even sports events! The transceiver has 8 channels and 38 CTCSS (Continuous Tone Coded Squelch System) codes. If someone else is using the same channel as you, you can select another channel or use the C
ページ3に含まれる内容の要旨
KEY FEATURES FRONT VIEW NO. DESCRIPTION FUNCTION 1 Antenna Flexible, bendable antenna receives and transmits signals, reduces chance of breakage and fits more easily and comfortably into shirt or pants pocket 2 LCD Display screen 3 PTT 1. Push to talk 2. Press PTT twice to enable Call Tone function 3. Confirm selection in MENU mode PWR 4 Press to turn the unit on and off 5 MIC Speak into microphone enables communication 6 MIC/Speaker Allows use of headset for hands free communication 3 EN
ページ4に含まれる内容の要旨
7 MENU 1. Scroll through menu options 2. Press and hold MENU to enable monitoring function 8 1. Increase Volume 2. Select Channel, CTCSS in MENU mode 1. Decrease Volume 2. Select Channel, CTCSS in MENU mode 9 Speaker Receives voices / sounds from incoming call BACK VIEW NO. DESCRIPTION FUNCTION 1 Strap hole Loop strap through so you can hang unit from your neck 2 Belt Clip Clip to your pocket or belt. 3 Back cover Remove to access battery compartment 4 EN
ページ5に含まれる内容の要旨
LCD DISPLAY SYMBOLS SYMBOL FUNCTION Receiving Transmitting Volume Voice Activation System Key Lock Auto Power Off Key Beeps Roger Beeps Scan Channel or CTCSS Battery Indicator Silent Alert function quietly alerts you of any incoming calls without beeping noises Channel Number: Select between 8 channels (big) CTCSS code: Adjust to minimize interference problems (small) 5 EN
ページ6に含まれる内容の要旨
SAFETY AND CARE INSTRUCTIONS SAFETY PRECAUTIONS Please observe the following safety precautions when setting up and using this product. * LCD panel – The LCD panel is made of glass, and may break if the unit is dropped or impacted. * Heat sources – Keep the product away from heat sources such as radiators, stoves, heaters, and other heat-generating products. * Water and moisture – Do not use the product in or near water or in high moisture areas such as a bathroom. CARING FOR THIS PRODUCT To ens
ページ7に含まれる内容の要旨
OPERATING THE TRANSCEIVER 1. To access the battery compartment, slide the hook at the back of the transceiver in an upward motion and remove. 2. Slide the back cover of the transceiver in a downward motion to remove. 3. Insert 3 AAA batteries into the battery compartment, noting polarities. 4. Slide the transceiver back cover and hook back into place. 7 EN
ページ8に含まれる内容の要旨
5. Press and hold to turn on the device. The unit will beep with the PWR LCD displaying all symbols for 1 second. 6. Use or to increase or decrease volume, respectively. The VOL number will show on the LCD accordingly. 7. To turn the device off, press and hold until the unit beeps and PWR the LCD goes blank. BASIC FUNCTIONS NOTE: The battery indicator will flash to indicate low battery power. 8 EN
ページ9に含まれる内容の要旨
NOTE: 1. Use 3 AAA alkaline or rechargeable batteries when operating this unit. Before charging, study the user manual section on “Charging Contacts” for further instructions. 2. Reset: At any time if the unit can’t work properly, please take off the batteries and insert them again. TALKING INTO TRANSCEIVER 1. Hold down the PTT button and speak into the MIC to transmit ( appears on the LCD). When finished, release the button. 2. The transceiver will automatically play received trans
ページ10に含まれる内容の要旨
AUTO-SQUELCH FUNCTION Your transceiver has an Auto-Squelch function for hearing weaker, distant transmissions. You will not hear anything on a channel unless someone is transmitting nearby on the same channel. 1. Press and hold MENU for 2 seconds to enable/disable this function. 2. Press MENU to access the Menu Options. The transceiver will then toggle between the following configurable settings: SYMBOL SETTING DESCRIPTION Channel Selects channel for transmission (big) CTCSS Selects a CTCS
ページ11に含まれる内容の要旨
Roger Beep Enable/disable beep heard after the finish of a received transmission Key Tone Enable/disable beep when a key on the transceiver is pressed Vibrating Enable/disable vibration function Automatic Enable/disable automatic shut-off after Power-Off device is idle for 2 hours NOTE: Press MENU to confirm and move to the next setting. To confirm the changes but quit the Menu Options, press PTT. SELECTING A CHANNEL Select between 8 channels. The transmitter and receiver must be on the
ページ12に含まれる内容の要旨
2. Press and hold or to begin scanning a CTCSS channel. If a valid signal is present, the transceiver will pause on the current active channel. 3. Press PTT to set and store the CTCSS channel, or the transceiver stores the display setting after 15 seconds. The scan mode will immediately search for the next CTCSS channel if no button is pressed after 5 seconds. 4. Press PTT to stop scanning and exit the menu. Or, press MENU to stop scanning and go to the next Menu Option. SETTING
ページ13に含まれる内容の要旨
2 Normal sensitivity – ideal setting for voice- activated transmission 3 High sensitivity – all detected soun(including noise) are transmitted b1 Low sensitivity – only audibly loud baby voices are transmitted (useful for noisy environments) b2 Normal sensitivity – ideal setting for voice- activated transmission b3 High sensitivity – all detected baby sounds are transmitted 3) Press PTT to confirm the VOX/b1/b2/b3 setting. 4) Press PTT again to activate VOX/b1/b2/b3 function. You can now begin v
ページ14に含まれる内容の要旨
1. Press MENU 5 consecutive times until appears on the LCD. 2. Press or to activate/deactivate the Key Tone function. SILENT ALERT Enabling the Silent Alert function allows you to be aware of any incoming calls without needing to turn on any beeping sounds. 1. Press MENU 6 consecutive times until appears on the LCD. 2. Press or key to activate/deactivate the Silent Alert function. NOTE: 1. If the vibration alert feature is activated, the device will vibra
ページ15に含まれる内容の要旨
1. Press MENU 7 consecutive times until appears on the LCD. 2. Press or key to activate/deactivate the function. NOTE: Press any button to re-enable the transceiver after automatic shut-off. ACCESSORIES CHARGING CONTACTS Your TP380 transceiver comes with 2 individual drop-in chargers that allow you to charge 2 transceivers at the same time using a connector cable and 1 adaptor, You may also charge each transceiver separately by an additional charger that come with the p
ページ16に含まれる内容の要旨
CAUTION: 1. Located inside the transceiver’s battery compartment is a charging switch, which must be set to “ON” while charging. If alkaline batteries are used, switch the set to “OFF”. To avoid risk of fire or inquiry, do no switch to ON when using alkaline batteries. Directly charge Ni-MH rechargeable batteries by using an optional 1-bay cradle charger. 2. DO NOT link the individual chargers together while using separate adaptors to charge. WARNING: 1. To maintain the battery life of your 2-w
ページ17に含まれる内容の要旨
CTCSS PRIVACY CODES CHANNEL FREQUENCY CHANNEL FREQUENCY (IN HZ) (IN HZ) 01 67.0 20 131.8 02 71.9 21 136.5 03 74.4 22 141.3 04 77.0 23 146.2 05 79.7 24 151.4 06 82.5 25 156.7 07 85.4 26 162.2 08 88.5 27 167.9 09 91.5 28 173.8 10 94.8 29 179.9 11 97.4 30 186.2 12 100.0 31 192.8 13 103.5 32 203.5 14 107.2 33 210.7 15 110.9 34 218.1 16 114.8 35 225.7 17 118.8 36 233.6 18 123.0 37 241.8 19 127.3 38 250.3 17 EN
ページ18に含まれる内容の要旨
SPECIFICATIONS RX Frequency 446.00625 – 446.09375 MHz Channels 8 Modulation type FM Antenna impedance 50 Ohm Microphone condenser type Power supply 3 × AAA Alkaline Sensitivity at 12dB Sinad 0.5µµµµµ V Adjacent Channel Rejection 55dB Audio Squelch Auto Audio output power 100mW @ 8 Ohm Audio Distortion 7% RF Output Power 500 mW @ 4.5VDC Harmonic emission >= 63dB suppression Dimensions (HWD) 87×54×36mm Weight (without batteries) 80g 18 EN
ページ19に含まれる内容の要旨
EN-DECLARTION OF CONFORMITY Hereby, Oregon Scientific declares that this PMR446 model TP380 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on requested via our Oregon Scientific Customer Service. ABOUT OREGON SCIENTIFIC Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic le
ページ20に含まれる内容の要旨
20
