ページ1に含まれる内容の要旨
AM400W
INSTALLATION/OWNER'S MANUAL
AM/FM/CD Marine Receiver with Detachable Face
ページ2に含まれる内容の要旨
AM400W INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove trim ring from unit. • Remove 2 transit screws located on
ページ3に含まれる内容の要旨
AM400W INSTALLATION Wiring Diagram Rear Preamp Output Connect to amplifier RCA input RCA Cable (sold separately) Antenna Connector BLUE Remote Turn-On Connect to amplifier or power AMP antenna. Insulate wire if not used. BLACK Ground Connect to vehicle chassis ground. RED Accessory Connect to ignition circuit or switched 12 volt source. 10 AMP AGC Fuse YELLOW Memory FUSE Connect to battery circuit or constant 12 volt source. When replacing the fuse, make sure new fuse is the corre
ページ4に含まれる内容の要旨
AM400W OPERATION Control Locations - Receiver 1 2 3 4 5 6 7 8 18 17 16 15 14 13 12 11 10 9 Release Preset 6 / Folder Up 1 10 Preset 5 / Folder Down 2 Volume 11 Preset 4 / Play / Pause 3 Mute / Power 12 4 Tune / Track Down 13 Preset 3 / Intro 5 Source 14 Preset 2 / Random Tune / Track Up Preset 1 / Repeat 6 15 Band / Select 7 Eject 16 Display / Escape 8 USB Port 17 9 Auxiliary Input 18 Audio / Menu 4
ページ5に含まれる内容の要旨
AM400W OPERATION Control Locations - Remote 4 5 6 3 7 2 8 1 9 1 Display / E SC 6 Source 2 Tune / Track Down 7 Tune / Track Up 3 Band / Select 8 Volume Down 4 Mute / Power 9 Audio / Menu 5 Volume Up 5
ページ6に含まれる内容の要旨
AM400W OPERATION General Operation Power On/Off Press or any other button (except EJECT ) to turn the unit on. Press to turn the unit off. Changing Modes Press SOURCE to select between AM/FM, CD player, ® ® auxiliary input, USB and operation of iPod /iPhone . Modes of operation are shown in the display. NOTE : CD, USB and operation of iPod modes will not appear unless a CD is inserted or USB/iPod devices are connected. Auxiliary
ページ7に含まれる内容の要旨
AM400W OPERATION General Operation - Setup Menu Menu Function Options Action Auto Station Press SELECT to seek and save 6 strong stations in the AUTO STORE Store current band. (Tuner mode only) LOCAL OFF Activates distance tuning (Tuner mode only ). Local/Distance Activates local tuning for strong station reception only (Tuner Tuning LOCAL ON mode only). Programs the unit to USA tuner spacing. FREQ USA Tuner (200kHz for FM and 10kHz for AM)
ページ8に含まれる内容の要旨
AM400W OPERATION General Operation Audio Press AUDIO momentarily to select between Bass, Treble, Balance, Fader, Equalizer and Source Volume Level. BASS TREBLE BALANCE FADER EQUALIZER SOURCE LEVEL Bass Press AUDIO until BASS appears then rotate volume knob left/right to adjust ( -6 minimum / +6 maximum). Treble Press AUDIO until TREBLE appears then rotate volume knob left/right to adjust ( -6 minimum / +6 maxim
ページ9に含まれる内容の要旨
AM400W OPERATION AM/FM Tuner Operation Seek Tuning Press TUNE or TUNE for more than one second nn ll to seek to the next strong station. Manual Tuning Press TUNE or TUNE momentarily to change nn ll radio frequency up or down one step at a time. Press and hold to advance quickly. Band Press BAND to select between FM1, FM2, FM3, AM1, AM2 and WB bands. Storing and Recalling Up to 18 FM stations and 12 AM stations can be stored. T
ページ10に含まれる内容の要旨
AM400W OPERATION CD Player Operation Insert CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Eject CD Press EJECT to eject the CD. The unit will change to previous mode of operation. If the disc is not removed within 10 seconds, the unit will reload the disc. The unit does not have to be turned on to eject CD. Track Select Press TRACK to skip to the beginning
ページ11に含まれる内容の要旨
AM400W OPERATION CD Player Operation (MP3/WMA Files) Playing an MP3/WMA Disc When an MP3/WMA encoded disc is first inserted, “DISC READ” will appear in the display. Depending on the number of files and folders, this may take several seconds. Displaying Information Press DISP to select between song title, artist, file name, folder name, track number, and clock/elapsed time. “NO ARTIST” or "NO TITLE" will be displayed if the MP3/ WMA
ページ12に含まれる内容の要旨
AM400W OPERATION CD Player Operation (MP3/WMA Files) Folder/File Search Mode MP3/WMA CD mode features a file and folder search mode. This search allows navigating through folders to find a specific MP3 or WMA file for playback. Step 1 Press SELECT to enter the file/folder search mode. A list of all the folders on the CD will be displayed. Note : Any files located in the root directory will be located in the folder named "ROOT".
ページ13に含まれる内容の要旨
AM400W OPERATION CD Player Operation (MP3/WMA Files) Folder Access Press to select the previous folder. Press to select the next folder. *Folder access is only available on MP3/WMA discs recorded with more than one folder. Repeat Press RPT to enter the Repeat menu, then turn the volume knob to select one of the following options: • ALL - Plays all tracks on CD. • TRACK - Continuously repeats selected track. • FOLDER
ページ14に含まれる内容の要旨
AM400W OPERATION CD Player Operation (MP3/WMA Files) Media Compatibility The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-D A • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management). • WMA lossless format • Discs recorded with Track At Once or packet writing • MP3 PRO format • MP3 playlists • WAV format Playback
ページ15に含まれる内容の要旨
AM400W OPERATION CD Player Operation (MP3/WMA Files) Additional MP3/WMA An internal buffer provides ESP (Electronic Skip Protection) to Information virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-D A or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played. Do
ページ16に含まれる内容の要旨
AM400W OPERATION USB Operation Connecting a USB Device To play MP3/WMA files from most USB mass storage (sold separately) devices, line up the USB connector and insert the USB device into the AM400W's USB port. Playing Music When a USB device is first connected, “USB READ” will appear in the display and playback will begin momentarily. Depending on the number of files and folders, it may take several seconds for the device to b
ページ17に含まれる内容の要旨
AM400W OPERATION USB Operation Displaying Information When a file is accessed, the clock and elapsed time will be displayed. Press DISP momentarily to select beween song title, artist, file name, folder name, track number and clock/ elapsed time. "NO TITLE" will be displayed if no song title information is available. "NO ARTIST" will be displayed if no artist information is available. Title Icon This icon will illuminate when th
ページ18に含まれる内容の要旨
AM400W OPERATION USB Operation Character Support Maximum character display information • Track name – 32 character maximum • Directory name – 32 character maximum • *Song title – 32 character maximum • *Artist name – 32 character maximum *Song title and artist name will only be displayed if included with the MP3/WMA file. Media Compatibility The following types of files are compatible: • MP3 data • WMA data The following types of file
ページ19に含まれる内容の要旨
AM400W OPERATION USB Operation Additional MP3/WMA Only MP3 files with filename extension (.mp3) can be played. Information Only WMA files with filename extension (.wma) can be played. Do not attempt to play non-MP3/WMA files with the MP3/WMA extension. Sampling Frequency Rates MP3 8kHz ~ 48kHz WMA 32kHz ~ 48kHz Transfer Bit rates MP3 32kbps ~ 320kbps constant Variable bit rates WMA 32kbps ~ 192kbps constant Variable bit rates Note: Some
ページ20に含まれる内容の要旨
AM400W OPERATION Operation of iPod Connect an iPod Device The AM400W features a direct USB control system for iPod. To play (Not Included) music from an iPod device, connect the USB cable (included with your iPod device ) to the AM400W's USB port . Once connected, "USB READ" is shown shortly, then "IPOD/IPHONE READ" will appear in the display. Playback will begin automatically. If a song is playing on the iPod device before it i
