ページ1に含まれる内容の要旨
Instruction Sheet
PN 51A-410VP/rev.D
Model 410VP
February 2013
Four-electrode Conductivity Sensor
For additional information, please refer to the Instruction Manuals CD shipped with this
product, or visit our website at www/rosemountanalytical.
CAUTION
CAUTION
WARNING
SENSOR/PROCESS APPLICATION COMPATIBILITY
Before removing the sensor, be absolutely certain
The wetted sensor materials may not be compatible
that the process pressure is reduced to 0 psig and
with process com position and operating
ページ2に含まれる内容の要旨
MODEL 410VP WIRING WIRING RTD RTN RTD SENSE orange current RTD IN RTD SHLD red RTD in 4CT B white voltage 4CT A white/red voltage RTD sense RTD black SHLD 2CT white SEN 2CT B RTD return SHLD 2CT gray current SEN 2CT A Figure 1. Wire color and functions. Current is injected through the gray and orange wires. Voltage Figure 2. Model 1056 and Model 56 wiring. is measured across the white and black wires. Figure 3.Model 1066 wiring Figure 4. Model 6081-C wiring The terminal end of the sensor is ke
ページ3に含まれる内容の要旨
MODEL 410VP CALIBRATION SETUP AND CALIBRATION The sensor is calibrated at the factory and does not require initial user-calibration. Simply configure the analyzer to accept a four-electrode sensor and enter the cell constant and calibration factor printed on the label. After a period of service, the sensor may require calibration. The sensor can be calibrated against a solution having known conductivity or against a referee meter and sensor. If using a standard solution, choose one having condu
ページ4に含まれる内容の要旨
The right people, the right answers, ON-LINE ORDERING NOW AVAILABLE ON OUR WEB SITE right now. http://www.rosemountanalytical.com Specifications subject to change without notice. Credit Cards for U.S. Purchases Only. Emerson Process Management 2400 Barranca Parkway Irvine, CA 92606 USA Tel: (949) 757-8500 Fax: (949) 474-7250 http://www.rosemountanalytical.com © Rosemount Analytical Inc. 2011 8
