ページ1に含まれる内容の要旨
Operator Manual
PZ29D CE / 966616701
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
English
ページ2に含まれる内容の要旨
In order to implement improvements, specifications and designs can be altered without prior notification. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty. Do not modify or install non-standard equipment to the unit without consent from the manufacturer. Modifications to the unit may cause unsafe operations or damage the unit. When this product is worn out and no lon
ページ3に含まれる内容の要旨
CONTENTS INTRODUCTION ............................................................... 5 Pump Release Valves ......................................... 37 Driving and Transport on Public Roads ...................... 5 MAINTENANCE ............................................................... 38 Engine and Radiator ................................................. 38 Towing ......................................................................... 5 Battery .........................................
ページ4に含まれる内容の要旨
WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance. WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals
ページ5に含まれる内容の要旨
INTRODUCTION Congratulations Towing Thank you for purchasing a Husqvarna ride-on If machine is equipped with a tow hitch, use extreme mower. This machine is built for superior efficiency caution when towing. Never allow children or others in to rapidly mow primarily large areas. A control panel or on the towed equipment. Make wide turns to avoid easily accessible to the operator and a hydrostatic jack-knifing. Travel slowly and allow extra distance to transmission regulated by steering contr
ページ6に含まれる内容の要旨
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer. See the certificate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult
ページ7に含まれる内容の要旨
SYMBOLS AND DECALS These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! IMPORTANT INFORMATION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. xxxxxx. Used in this publication to notify the reader of a risk Used in this publication to notify the reader of a risk of material damage, particularly if the reader should o
ページ8に含まれる内容の要旨
SYMBOLS AND DECALS Shut off engine and remove key before performing any Keep a safe Read Operator’s maintenance or repair distance from the Use on slopes no Manual work machine greater than 10° No passengers Whole body Severing of fingers Do not open or Careful backing up, Careful going exposure to and toes remove safety watch for other forward, watch for thrown objects shields while people other people engine is running Noise emissions to the surroundings in accordance with the European U
ページ9に含まれる内容の要旨
SAFETY Safety Instructions These instructions are for your safety. Read them WARNING! carefully. This symbol means that important safety instructions need to be WARNING! emphasized. It concerns your safety. THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. General Operation • Read, understand, and follow all instructions on the machine and in the manual before
ページ10に含まれる内容の要旨
SAFETY • Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard. • Operate machine only in daylight or good artificial light. • Do not operate the machine while under the influence of alcohol or drugs. • Watch for traffic when operating near or crossing roadways. • Use extra care when loading or unloading the machine into a trailer or truck. • Always wea
ページ11に含まれる内容の要旨
SAFETY Personal Safety Equipment WARNING! When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment. • Make sure that you have first aid equipment close at hand when using the machine. • Never use the machine when barefoot. • Always wear protective shoes
ページ12に含まれる内容の要旨
SAFETY • Do not use on steep slopes. • Do not try to stabilize the machine by putting a foot on the ground. • Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in. WARNING! CHILDREN CAN BE INJURED BY THIS EQUIPMENT. The American Academy of Pediatrics recommends that children be a minimum of 16 0000-000 years of age before operating a riding Be extra cautious when driving on slopes lawn mower. Keep ch
ページ13に含まれる内容の要旨
SAFETY Safe Handling of Diesel Fuel WARNING! The engine and the exhaust system become very hot during operation. There is risk for burns if touched. Allow engine and exhaust system to cool before refueling. To avoid personal injury or property damage, use extreme care in handling diesel fuel. Diesel fuel is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition. • Use only approved fuel containers. 8011-516 • Never remove
ページ14に含まれる内容の要旨
SAFETY General Maintenance • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the equipment is in safe working condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris buildup. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing. • If the machine strikes a foreign object, stop and inspect the machine. Repair, if necessary, befo
ページ15に含まれる内容の要旨
SAFETY Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury. Sparking in this circuit can not occur after the chassis cable (normally negative, black) is removed from the battery. WARNING! Avoid electrical sparking and its consequences by the following routines: • Use protective goggles. • Ensure that the fuel filler cap is mounted tightly and no flammable substances are stored in an 6003-009 op
ページ16に含まれる内容の要旨
SAFETY Transport • The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is IMPORTANT INFORMATION loaded on or unloaded from a vehicle or trailer. The parking brake is not sufficient to lock the • Use an approved trailer to transport the machine. machine in place during transport. Ensure that Activate the parking brake, turn off the fuel supply, the machine is well fastened to the transport and fasten the machine with approved fastening vehicle. Always r
ページ17に含まれる内容の要旨
SAFETY Rollover Protection System (ROPS) WARNING! The ROPS increases the basic weight of the unit by 73 The rollover protection system's lbs/33 kg. capabilities may be impaired by • Do not use the ROPS as a lifting, attaching or damage if the mower is overturned anchoring point. or if alteration to the ROPS occurs. If • Do not use the ROPS for wrecking or towing. these conditions take place, the total • Do not exceed Max GVW: 2822 lbs/1283 kg. structure MUST be replaced. • Securely fasten
ページ18に含まれる内容の要旨
CONTROLS This operator’s manual describes the Husqvarna Zero hydraulic pumps. Using the left and right steering Turn Rider. The rider is fitted with a Kubota engine. controls, the flow is regulated and thereby the direction and speed. Transmission from the engine is made via belt-driven Control Locations 4 3 2 1 8065-109 14 5 13 6 12 7 11 8 10 9 *The power rating of the engines indicated is the average 1. Motion control levers 8. Ignition switch net power output (at specified rpm) of a typic
ページ19に含まれる内容の要旨
CONTROLS Motion Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward. When both controls are in the neutral position (N), the machine stands still. By moving both controls an equal amount forward or backward, the machine moves in a straight line forward o
ページ20に含まれる内容の要旨
CONTROLS Parking Brake The parking brake is found on the left of the machine. Pull the lever backward to activate the brake and push forward to release it. IMPORTANT INFORMATION The machine must stand still when applying the parking brake. Always set the parking brake before dismounting. Release the parking brake before moving the mower. 8065-006 Parking brake Blade Switch To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed do
