Dixon 312の取扱説明書

ページ1に含まれる内容の要旨

DIXON INDUSTRIES. INC. A
BLOUNT COMPANY AIRPORT

INDUSTRIAL PARK
PO BOX 1569
COFFEYVILLE KS 67337 0945
316 251 2000
FAX 316 251 4117


TECHNICAL DATA
ZTR Model 312
IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS
SEAT ADJUSTMENT
1. Pull or lift body retention latch P/N 3934
from transaxle backing plate, raise
and push body and seat assembly
forward.
2. Loosen four seat adjustment knobs P/
N 1849 and slide seat forward or
backward to desired pos

ページ2に含まれる内容の要旨

REMOVING THE BODY 1. The 312 has a two-piece polyethylene body. The upper body can be folded forward to expose the transaxle. In some cases, it may be necessary to remove the upper body to service the transaxle. 2. To remove upper body, remove two bolts P/N 3093 from the front of upper body hinge located on the brake shaft P/N 9283. Disconnect seat switch P/N 4761 at plug-In. 3. Reverse above procedure to reinstall. ADJUSTMENT OF MOWER DECK DRIVE BELT 1. This mower deck drive belt

ページ3に含まれる内容の要旨

MOWER BLADE OPERATION To engage mower blades, turn engagement lever on floor slowly to the "ON" position. To Disengage mower blades, turn lever slowly to the "OFF" position. SAFETY CHECKS IMPORTANT - PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS • ' • ' - ' • • ••' * 1. After reassembly, while seated on mower, attempt to start engine with mower deck engaged. Engine should not start. If engi

ページ4に含まれる内容の要旨

312 BODY ASSEMBLY

ページ5に含まれる内容の要旨

ページ6に含まれる内容の要旨

312 CHASSIS ASSEMBLY

ページ7に含まれる内容の要旨

312 TRANSAXLE ASSEMBLY

ページ8に含まれる内容の要旨

312 MOWER DECK ASSEMBLY 30'

ページ9に含まれる内容の要旨

312 WIRING ASSEMBLY