ページ1に含まれる内容の要旨
OWNER’S MANUAL
Safety, Assembly, Operating, and Maintenance Instructions
Model MC (18 HP)
(Covers Serial Numbers 03-61061 and on)
™
Please Read and Save These Instructions Effective Date: 04-15-03
For Safety, Read All Safety and Operation P/N 6000-8
Instructions Prior to Operating Machine Price $5.00
ページ2に含まれる内容の要旨
Foreword Thank you. . .for purchasing a Walker mower. Every effort has been made to provide you with the most reliable mower on the market, and we are sure you will be among our many satisfied custom- ers. If for any reason this product does not perform to your expectations, please contact us at (970) 221-5614. Every customer is important to us. Your satisfaction is our goal. Please. . .read this manual thoroughly! This manual is to be used in conjunction with the engine manufacturer’s manu
ページ3に含まれる内容の要旨
Table of Contents General Information ________________ 1 Operating Instructions_____________ 24 HIGHLIGHTED INFORMATION _____________ 1 CONTROL IDENTIFICATION, GLOSSARY ____________________________ 1 LOCATION, AND FUNCTION _____________ 24 IDENTIFYING NUMBER LOCATIONS________ 1 Ignition Switch _______________________ 24 ENGINE SERIAL NUMBER LOCATION ______ 2 Engine Choke________________________ 25 SERVICING OF ENGINE AND DRIVETRAIN Engine Throttle ______________________ 25 COMPONENTS____________
ページ4に含まれる内容の要旨
Table of Contents REPLACING/REPAIRING ________________ 59 Maintenance Instructions __________ 41 Drive Belts __________________________ 59 MAINTENACE SCHEDULE CHART ________ 41 Engine PTO Drive Belt _______________ 61 IMPORTANT TIPS FOR CARE Jackshaft Drive Belt _________________ 62 OF THE KOHLER ENGINE _______________ 42 GHS Blower Drive Belt _______________ 63 Fuel System _________________________ 42 Hydrostatic Ground Drive Belt _________ 64 Starting/Stopping_____________________ 42 Fuel Filt
ページ5に含まれる内容の要旨
General Information HIGHLIGHTED INFORMATION • POWER TAKE-OFF (PTO) transmits engine power to run the cutter blades and GHS blower. Walker Manufacturing recommends that any service requiring special training or tools be performed by • POWERFIL spreads the mowed material an authorized Walker Mower Dealer. There are sev- throughout the interior of the grass catcher by eral general practices to be aware of in the area of an oscillating delivery spout. safety. Most accidents associated with the
ページ6に含まれる内容の要旨
General Information SERVICING OF ENGINE AND DRIVETRAIN COMPONENTS Serial Number The detailed servicing and repair of the engine, hydrostatic transmission, and gearboxes are not cov- ered in this manual. Only routine maintenance and general service instructions are provided. For the service of these components during the limited war- ranty period, it is important to find a local, authorized servicing agent of the component manufacturer. Any unauthorized work done on these components dur- ing t
ページ7に含まれる内容の要旨
Specifications MODEL MC ENGINE Manufacturer/Model Kohler Command CH18, 2 Cyl., Gasoline (Air-Cooled) Displacement 38.0 cu. in. (624 cc) HP (@ 3600 RPM) 18.0 Max. RPM (No Load) 3750 Governed RPM 3600 Max. Torque [ft-lb (N⋅m) @ RPM] 30 (41) @ 2500 Idle RPM 1200 ± 75 ® Spark Plug Type Champion RC12YC Spark Plug Gap .030 in. (.76 mm) Crankcase Capacity 2 qts (1.9 liters) Crankcase Lubricant API SG or SH Grade Oil Only with 10W-30 Viscosity above 0° F (-18° C), or 5W-20 or 5W-30 Viscosity below 32° F
ページ8に含まれる内容の要旨
Specifications MODEL MC TRANSMISSION (continued) Transmission Fluid Factory Service Mobil 1 Synthetic Motor Oil (15W-50) Alternate Transmission Fluid SAE 30W Straight Viscosity Motor Oil Transmission Fluid Capacity 1 qt (1 liter) Transmission Cooling Cooling Fan Mounted on Drive Pulley Ground Travel Speed Forward m.p.h. (km/h) 0-5 (0-8) Infinitely Variable Reverse m.p.h. (km/h) 0-5 (0-8) Infinitely Variable BLADE DRIVE PTO Shaft Quick Disconnect Spline Shaft with Two High-Speed U-Joints Blade
ページ9に含まれる内容の要旨
Specifications MODEL MC DIMENSIONS (continued) Height SD Model 37-1/2 in. (95 cm) GHS Model 44-1/2 in. (112 cm) Wheel Base (Tractor) 42-1/4 in. (107 cm) Tread Width (Tractor) Standard Tires 28-1/4 in. (72 cm) Optional Tires 29-3/4 in. (76 cm) MOWER DECK Width of Cut SD/GHS 36 or 42 in. (91 or 107 cm) Cutting Height 1 to 4 in. (3 to 10 cm) Height Adjustment 7 Positions - 1/2 in. (1 cm) Increment Hitch Pins Installed in Multi-Position Deck Support Blade Size 36 in. (91 cm) SD Model 20 in. (51 cm)
ページ10に含まれる内容の要旨
Specifications MODEL MC GHS SYSTEM (Optional) Blower 4 x 10 x 1/4 in. (10 x 25 x 1 cm) Three-Blade Paddle Wheel (Driven by Mower Engine) Blower Brake Band Brake (Works in Combination with PTO Clutch, Stops Blower within Five (5) Seconds of PTO Disengagement) Max. Blower Speed 3600 RPM Grass Catcher Capacity 63 Gallons (238 liters)/6.7 Bushels Optional Grass Catcher Capacity* 89 Gallons (335 liters)/9.5 Bushels Full Signal Oscillating Vane Switch Mounted on Grass Delivery Spout Triggers Horn Sig
ページ11に含まれる内容の要旨
Component Identification NOTE: Control Identification shown in Operating Instructions section. Grass Handling System Catcher Door Turbine 9.5 Bushel Catcher Safety Latch Precleaner Tilt-Up Latch Spring Clip Counterweight Spring and Protective Cover Transmission Control Rod Adjustment Nut (LH) Anti-Scuff Roller Deck Support Pins and Height Adjustment Catcher Lift / Hitch Pins Dump Handle Fuel Tank and Cap Transmission Control Rod Adjustment Nut (RH) Deck Support Arms Footrests Deck Lift Handle
ページ12に含まれる内容の要旨
Component Identification Removable Grass Catcher Screen (Not Visible) Catcher Exhaust Catcher Door Deflector Gas Spring Catcher Door Gas Spring Protective Cover Catcher Lift / Dump Handle Catcher Door Catcher Door Handle Anti-Scuff Roller Muffler Oil Drain Tailpipe Left Hand Plug Drive Wheel Oil Filter Tailwheel Fork and Wheel Rear View and Left Side View 8
ページ13に含まれる内容の要旨
Component Identification Air Restriction Indicator Donaldson Air Cleaner (Not Visible) Air Cleaner Cover Rubber Bumper Rubber Bumper (Body Support) (Body Support) Fuel Pump Muffler Air Intake Hose Throttle and Choke Linkage Precleaner Tube Muffler Heat Shield Oil Fill/ Fuel Tank Cap Dipstick Jackshaft PTO Gearbox Dipstick GHS Blower Turbine Precleaner RH Hydrostatic Transmission RH Transmission Lockout Lever Neutral Safety Switch PTO Clutch Lever LH Hydrostatic Transmission 30 Amp Circuit Break
ページ14に含まれる内容の要旨
Safety Instructions Pay particular attention to any information labeled Walker Manufacturing cannot predict every poten- DANGER, WARNING, CAUTION, IMPORTANT, tially dangerous situation. Therefore, items labeled and NOTE in this manual. as such in this manual do not cover all conceivable situations. Any person using procedures, tools, or When you see the Safety Alert Symbol ( ), control techniques not recommended by Walker read, understand, and follow the instructions. Fail- Manufacturi
ページ15に含まれる内容の要旨
Safety Instructions 6. Do not wear loose fitting clothing that could get 12. The electrical system battery contains sulfuric caught in moving parts. Do not operate this acid. Avoid any contact with skin, eyes, and machine while wearing shorts; always wear clothing. Keep the battery and acid out of reach adequate protective clothing, including long of children. pants. Wearing safety glasses, safety shoes, OPERATING and a helmet is advisable and required by some local ordinances and insurance
ページ16に含まれる内容の要旨
Safety Instructions 9. Watch for holes, rocks, and roots in the terrain 17. For GHS equipped models, use care when and for other hidden hazards. When mowing closing the grass catcher door. Keep fingers tall grass, mow higher than desired to expose and hands away from the hinge and pinch any hidden obstacles. Then, clean the area and points when the door is being closed. Also, mow to the desired height. keep fingers and hands clear of the door frame. The door is held closed with springs and
ページ17に含まれる内容の要旨
Safety Instructions 2. To reduce fire hazards, keep the engine free of c. Keep sparks, flames, and smoking materi- grass, leaves, excessive grease, and dirt. als away from the battery at all times. To avoid sparks, use care when removing bat- 3. Keep all nuts, bolts, and screws tight to ensure tery cables from posts. the machine is in a safe, working condition. Check the blade mounting nuts frequently, mak- d. Disconnect both battery cables before ing sure they are tight. unplugging any wiring
ページ18に含まれる内容の要旨
Safety Instructions SAFETY, CONTROL, AND INSTRUCTION DECALS Safety, Control, and Instruction Decals are installed on the machine; if any are missing, illegible, or damaged, a replacement should be ordered and installed before putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual. Each End of Mower Deck (5808) Adjacent to Blower Discharge Chute through Body (5804) SD Deck Discharge Shield (5848) Front Body Adjacent to Hydrostat Oil RH Steering Lever (6
ページ19に含まれる内容の要旨
Safety Instructions SAFETY, CONTROL, AND INSTRUCTION DECALS Safety, Control, and Instruction Decals are installed on the machine; if any are missing, illegible, or damaged, a replacement should be ordered and installed before putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual. Top of Blower Housing (5819) Deck Gearbox Cover (5807-3) Jackshaft Support Adjacent Deck Carrier Frame (5865) Deck Carrier Frame (8653) to Dipstick (7827) On Engine (6810) De
ページ20に含まれる内容の要旨
Assembly Instructions SETUP INSTRUCTIONS Dry Battery Service Walker Mowers are shipped partially assembled. DANGER After uncrating the tractor and mower deck, initial setup is required. Activating a battery can be dangerous. NOTE: During the process of unpacking, any dam- The battery should be taken to a reliable aged or missing parts should be noted and reported service station, battery store, or power to the delivering carrier immediately (put in writing equipment dealer where a trained techni
