ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
2
ページ3に含まれる内容の要旨
TABLE OF CONTENTS Page TO THE PURCHASER 4 ILLUSTRATIONS 4 DIRECTION REFERENCE 4 WARRANTY 4 SAFETY PRECAUTIONS 5 SAFETY FIRST 5 CHILDREN 6 CAB SAFETY 6 BEFORE OPERATION 6 CAB OPERATION 6 MAINTENANCE 9 DECALS 10 CAB OPERATING INSTRUCTIONS 11 DOORS AND WINDOWS 11 Locking and Un-locking the Door 11 Opening the Door 11 Opening Escape Window 11 Opening Side W
ページ4に含まれる内容の要旨
TO THE PURCHASER All products are designed to give safe, dependable service if they are operated and maintained according to instructions. Read and understand this manual before operation. This manual has been prepared to assist the owner and operators in the safe operation and suitable maintenance of the cab. The information is applicable to products at the time of manufacture and does not include modifications made afterwards. Read and understand this operator’s manual before attempti
ページ5に含まれる内容の要旨
SAFETY PRECAUTIONS SAFETY FIRST This symbol, the industry’s “Safety Alert Symbol”, is used throughout this manual and on labels on the machine itself to warn of the possibility of personal injury. Read these instructions carefully. It is essential that you read the instructions and safety regulations before you attempt to assemble or use this cab. Indicates an immediate hazardous situation which, if not avoided, will result in death or serious injury. DANGER: Indicates a poten
ページ6に含まれる内容の要旨
CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are generally attracted to machines and the work being done. Never assume children will remain where you last saw them. 1. Keep children out of the operating area and under the watchful eye of another responsible adult. 2. Be alert and turn machine off if children enter the work area. 3. Before and when backing up, look behind for small children. 4. Never carry children while operating
ページ7に含まれる内容の要旨
CAB SAFETY BEFORE OPERATION Read and understand both the tractor and this operator’s manual before operating the equipment. Know how to operate all controls and how to stop the unit and disengage controls quickly. Lack of knowledge could lead to accidents. 1. Never wear loose, torn, or bulky clothing around the tractor and cab. They can catch on moving parts or controls, causing injury. 2. Before and during seasons, thoroughly inspect the area where the cab is to be used and remove all
ページ8に含まれる内容の要旨
9. Never operate cab without guards, and other safety protective devices in place. All tractor and cab covers must be correctly installed at all times. When necessary to remove these, they must be re-installed immediately. 10. Never operate cab/tractor at high transport speeds on a slippery surface. 11. Use extra caution when backing up. 12. Disengage power to cab when transporting or when not in use. 13. Never operate cab/tractor without good visibility and lighting. 14. Prolonged exposu
ページ9に含まれる内容の要旨
MAINTENANCE ALWAYS USE GENUINE PARTS WHEN REPLACEMENT PARTS ARE REQUIRED. 1. Keep the tractor and cab properly maintained. 2. Park the tractor/cab on level ground, place the transmission in neutral, set the parking brake, disengage the PTO, lower all tractor attachments to the ground, place all control levers in neutral, shut off the engine and remove the ignition key and allow all moving parts to stop BEFORE making any tractor/cab adjustments. 3. To avoid injury, do not adjust, unblo
ページ10に含まれる内容の要旨
DECALS Replace immediately if damaged or missing. Contact Jodale Perry for replacement decals. CAUTION The resulting noise levels when using this product will exceed OSHA standards for an 8 hour workday and hearing protection with a Noise Reduction Rating (NRR) of 22 or higher is required. 10
ページ11に含まれる内容の要旨
CAB OPERATING INSTRUCTIONS DOORS AND WINDOWS Locking and Un-locking the Door From the outside: Insert key into the door lock. Turn key clockwise to unlock the door. Turn key the counter-clockwise to lock the door. When the key is in the vertical position, it can be removed from the lock. The cab door is not lockable from the inside of the cab. ——————————————————————————————— Opening the Door From the outside: Unlock the door and push the round button. From the inside: Push the door
ページ12に含まれる内容の要旨
Opening Side Window Pull the side window latch up to release from the pin, and push out to open window. Push down on latch to secure open for ventilation. ——————————————————————————————— DOME LIGHT The rocker switch on the domelight activates the light. Push switch down to turn on domelight and to turn off downlight. IMPORTANT: The cab is wired such that the ignition switch turns on all cab electrical features. ——————————————————————————————— CAB SWITCHPLATE IMPORTANT
ページ13に含まれる内容の要旨
. Using the Wipers in Winter 1. While not used in winter, keep the blades off the windshield to prevent them from being stuck with ice. 2. If the windshield is covered with snow, scrape it off before using the wipers. 3. If the wiper blade is stuck to the windshield with ice and does not move, switch wiper to the OFF position, and remove the ice from the wiper blade. Front Work Lights Ensure that the ignition switch is on and press the top portion of the front work light switch.
ページ14に含まれる内容の要旨
HEATER/PRESSURIZING FAN CAUTION To avoid personal injury: Have the tractor repaired immediately if any of the following defects are discovered. Such defects may cause burns or injuries. They may also cause engine seizure or other serious failure. Daily Inspection: 1. Check for scratches, cracks, or swelling in the water hoses. 2. Check for leakage at water hose joints. 3. Check for loose mounting bolts and damaged brackets. Do not touch the water hoses and the heater with your h
ページ15に含まれる内容の要旨
PARTS All parts are illustrated in ‘exploded views’ which show the individual parts in their normal relationship to each other. Reference numbers are used in the illustrations. These numbers correspond to those in the ‘Item #’ column, and are followed by the description and quantity required. Orders must give the complete description, correct part number, the total amount required, cab serial number, method of shipment and the shipping address. The manufacturer reserves the right to c
ページ16に含まれる内容の要旨
Fixed Glass Item # Description Qty. JDP P/N 1 Windshield Glass 1 101454 n/a Windshield Weatherstripping (16.04LF) 1 101460 2 Rear Window 1 101457 n/a Rear Window Weatherstripping (11.09LF) 1 101463 3 Lower Right Window 1 101459 n/a Lower Right Window Weatherstripping (7.43LF) 1 101465 4 Nut, Flange, 1/4", Macro-black 12 100223 5 Bolt, Step, 1/4" x 1 1/4", Macro-black 12 100003 6 Bushing, Neoprene, 5MM, Black 12 100382 7 Bushing, Neoprene, 8MM, Black 12 100381
ページ17に含まれる内容の要旨
ROPS Mounting Assembly Item # Description Qty. JDP P/N 1 Front Cab Bracket 1 101468 2 Rear Left Bracket 1 101469 3 Rear Right Bracket 1 101470 4 Bolt, Hex, 1/2" x 3", Gr. 8, YD 4 100121 5 Nut, Hex, Locking, 1/2", Gr. 8, YD 8 100116 6 Washer, Flat, Steel, 1/2" x 2 1/2", YD 4 100450 7 Isolator, Rubber, 1/2" x 2 1/2", Black 4 100448 8 Washer, Flat, Rubber, 1/2" x 2 1/2", YD 4 100449 9 Bolt, Hex, 1/2" x 1 1/2", Gr. 8, YD 4 100054 10 Bolt, Hex, 7/16" x 1 1/2", Gr. 8, YD 2 100886 11 Nut, Flange, 7/16"
ページ18に含まれる内容の要旨
Frame Parts Item # Description Qty. JDP P/N 1 Striker Pin 1 100013 2 Striker Pin Nut 1 100014 3 Bolt, Flange, 1/4" x 1/2", YD 2 100278 4 Striker Plate 1 100012 5 Washer, Flat, 1/2", Gr. 8, YD 1 100431 6 Gas Shock 1 100365 7 Gas Shock Ball Stud 1 100366 8 Gas Shock Clip 2 100367 9 Bolt, Hex, 5/16" x 1 1/2", YD 2 100376 10 Latch Bushing 4 100033 11 Nut, Flange, 5/16", YD 2 100005 12 Window Arm Pin 1 100019 13 Nut, Flange, M10 x 1.5 1 100020 n/a Lift Hole Plug Buttons 2 100478
ページ19に含まれる内容の要旨
Body Panels Item # Description Qty. JDP P/N 1 Left Composite Side Panel 1 101471 2 Right Composite Side Panel 1 101472 3 Nut, Extruded-Panel, 1/4" 8 100042 4 Screw, Button-Head, 1/4" x 1", Macro-black 8 100441 5 Rear Shield 1 101482 n/a Nut, 4-Lobe, 1/4" 4 101483
ページ20に含まれる内容の要旨
Door Assembly Item # Description Qty. JDP P/N Item # Description Qty. JDP P/N 1 Door Glass 1 101455 13 Bolt, Flange, M6 x 1.0 x 25mm, YD 3 100007 2 Door Glass Weatherstripping (13.57LF) 1 101461 14 Door Latch - Left 1 100006 3 Nut, Flange, 1/4", Macro-black 6 100223 15 Nut, Flange, M6 x 1.0m YD 2 100008 4 Bolt, Step, 1/4" x 1 1/2", Marco-black 4 100635 16 Gas Shock Ball Stud 1 100366 5 Bolt, Step, 1/4" x 1", Macro-black 2 100003 17 Gas Shock Mount Plate 1 100368 6 Bushing, Neoprene, 5MM, Black 4
