ページ1に含まれる内容の要旨
swisherinc.com
OWNER’S
MANUAL
MODEL NO.
RT105441
RT800441
POL10544HD
44” ROUGH CUT
RTB105441
TRAILMOWER
Assembly
Operation
Service and Adjustment
Rev. 09.25.03
Repair Parts
1602 CORPORATE DRIVE, P.O. BOX 67, WARRENSBURG, MISSOURI 64093
Made In The
PHONE (660) 747-8183 FAX (660) 747-8650
Manufacturing quality lawn care equipment since 1945
USA
ONRT44
ページ2に含まれる内容の要旨
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. This warranty is subject to the following limitations and exclusions: 1) Engine Warranty All engines utilized on our products have a separate
ページ3に含まれる内容の要旨
SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. This machine can amputate hands, feet, and throw objects. Failure to observe the following safety instructions could result in serious injury or death. • Read the manual. Learn to operate this machine safely. • Always di
ページ4に含まれる内容の要旨
• Turn off the blades when not mowing. Before leaving the machine, turn off the blades and stop the engine. • Watch for traffic when operating near or crossing roadways. • Do not operate the mower if it has been dropped or damaged in any manner or if the mower vibrates excessively. Excessive vibration is an indication of damage. Repair mower as necessary. • Dress properly. Do not operate the mower when barefoot or wearing open sandals. Wear only solid shoes with good tracti
ページ5に含まれる内容の要旨
SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc. OD55-DANGER DECAL OD20-CAUTION DECAL OD45-WARNING DECAL OD28-OFF/ON DECAL OD10-ENGAGE DECAL OD99116-MED. SILVER LOGO DECAL
ページ6に含まれる内容の要旨
SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc. 0D82-44 RUGGED CUT DECAL OD29- DANGER DECAL
ページ7に含まれる内容の要旨
ページ8に含まれる内容の要旨
• Return lever to its vertical position to disengage blades. • The braking system is applied when the blades become disengaged. It is designed to bring the blades to quick stop (approximately 7 seconds). Each TrailMower brake system has been tested and calibrated. For safety, the consumer should not alter the braking system. STARTING THE ENGINE See engine manufacturer’s recommendations for the type and amount of oil and fuel used. • Make sure the tow vehicle parking brake is se
ページ9に含まれる内容の要旨
TOW HITCH OFFSET • When offsetting the mower do so to the side opposite the discharge of the tow vehicle. • Swisher recommends if the tow vehicle is equipped with a mid-mount mower to overlap the cut approximately 6”. This may vary depending on mowing terrain, obstacles, and/or tow vehicle. Always keep safety the first priority. • Always keep the tow vehicle cutter raised higher than the TrailMower. • If the tow vehicle is not equipped with a mid-mount mower, we still recommend off
ページ10に含まれる内容の要旨
GENERAL TROUBLE SHOOTING The mower is not cutting level. • Level deck, making sure the side crank-handles are equal. • Check air pressure of all tires; make sure they are equal. See tires for maximum inflation. • Make certain blades are installed identical, without the engine running. The engine will not start. • Disengage blades, turn toggle switch to “OFF” position, check battery and all other electrical connections, and inspect spark plug and wire (FIGURE THREE). • Contact en
ページ11に含まれる内容の要旨
CUTTER MAINTENANCE GENERAL RECOMMENDATIONS The warranty on this cutter does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain unit as instructed in this manual. Some adjustments will need to be made periodically to maintain your unit properly. All adjustments in the service and adjustments section of this manual should be checked at least once each season. BEFORE EACH SEASON • Replace the spark
ページ12に含まれる内容の要旨
SEE FIG. 4 SEE FIG. 7
ページ13に含まれる内容の要旨
HEIGHT ADJUST ASSEMBLY 25 26 24 23 22 3 21 27 Figure 4 (see replacement list)
ページ14に含まれる内容の要旨
ITEM NO. QTY. PART NO. DESCRIPTION 16 1 1 4859 STUMP JUMPER 2 2 NB-146 3/4 SAE Washer ZP 3 2 4855 18" BLADE 6 Note: Torque to 4 2 NB-611 3/4-10 X 2 1/2 GR8 BOLT 5 2 NB-609 3/4-10 NYLOC NUT 14 6 4 NB738 BELLVILLE WASHER 235 ft/lbs 7 1 NB-614 1 X 1 1/2 10GA Washer Hard 8 2 4845 BLADE BEARING 13 12 9 2 4049 TUBE SPACER 8 10 1 4858 BLADE DRIVER HOUSING 11 4 NB-509 1/2-13 X 2 HCC GR5 ZP 12 4 NB-281 1/2-13 NYLOC NUT 10 13 1 BB105SL SPACE LOWER ENGINE 14 1 4846 BLADE PULLEY - 10.3125" 11 15 1 NB737 1-8
ページ15に含まれる内容の要旨
4846 B527 BB105
ページ16に含まれる内容の要旨
ページ17に含まれる内容の要旨
REPLACEMENT PARTS When ordering parts that are painted, please supply a paint code at the end of the part number. C=Red TK=Black S=Silver Example: 4836C, 4898TK, 4844S ITEM # PART # DESCRIPTION ITEM # PART # DESCRIPTION 1 4865 DECK WELDMENT 30 6681 IDLER ARM 2 NB-501 5/16-18 X 1 1/4 FLNGE BOLT 31 NB-588 1/2-13 X 2 1/2 BOLT NB-181 5/16-18 FLNGE NUT NB-121 1/2-13 TWO-WAY LOC NUT 3 4827 PIN LOCK NB-281 1/2-13 NYLOC NUT 4 WHRT44TEC WIR HRNES-TEC 32 NB-250 1/4-20 X 3/4 BOLT 4 WHRT44BS WIR HRNES-BRIGG
ページ18に含まれる内容の要旨
44”ROUGH CUT swisherinc.com TRAILMOWER Each mower has its own model number. Each engine has its own model number. The model number for the mower will be found on the right hand side of the drive belt housing. The model number for the engine will be found on the top of the blower fan housing. OWNER’S All mower parts listed herein may be ordered directly from Swisher Mower & Machine Co. Inc. or your nearest Swisher MANUAL dealer. All engine parts may be ordered from the nearest dealer of the e
