ページ1に含まれる内容の要旨
STIGA
DINO 45 EURO
DINO 45
8211-3389-09
ページ2に含まれる内容の要旨
S SVENSKA 1. 2. 12 34 3. 4. FULL ADD 5. 6. G G 7. 8. EURO ADD FULL STOP
ページ3に含まれる内容の要旨
S SVENSKA 2 3 1 3x 9. 10. 0.7-0.8 mm 11. 12. 40 Nm 13.
ページ4に含まれる内容の要旨
GB ENGLISH The handlebar has four different positions. Release SYMBOLS the catch with the foot and move the handlebar to the desired position (fig. 3). The following symbols are displayed on the 1. For normal mowing. machine in order to remind you about the safety 2. For mowing under trees, shrubs etc. precautions and attention necessary when using 3. Parking position. the machine. 4. Transportation and storage position. The The symbols mean: handlebar takes up less room if the locking W
ページ5に含まれる内容の要旨
GB ENGLISH Preferably use environmentally friendly petrol, i.e. CUTTING HEIGHT alkylate petrol. This type of petrol has a Shut off the engine before adjusting the composition that is less harmful to people and cutting height. nature. It has e.g. no lead additives, no oxygenators Do not set the cutting height so low that (alcohols and ethers), no alkenes and no benzene. the blade can hit uneven ground. NOTE! If you change to environmentally friendly Avoid mowing when the grass is wet. The
ページ6に含まれる内容の要旨
GB ENGLISH Always check the blade after an impact. First CHANGING OIL disconnect the ignition cable. If the blade system Change the oil when the engine is warm has been damaged the defective parts must be and the petrol tank is empty. Hot oil will changed. Always use genuine spare parts. run out of the engine better. Use caution To replace the blade, slacken the blade bolt. Fit the when draining the hot oil, as it could new blade so that the stamped STIGA logotype is cause burn injuries
ページ7に含まれる内容の要旨
NOTES .................................................................................................................................................................... .................................................................................................................................................................... ....................................................................................................................................................................
ページ8に含まれる内容の要旨
S HÄUFIGE ERSATZTEILE - FREQUE SVENSKA NT PARTS 1) Dieser komplette Messerbalken be- steth aus einem Messerbalken, der die Bezeichnung “1111-0643-06” trägt. 4 1 3 2 Ref Best. nr. Pos Part No. Description Benennung 1 1111-9502-01 Blade bar Messerbalken 2 1111-5232-16 Balde bolt Messerbolzen 3 1111-0011-01 Washer Scheibe 4 1111-9023-02 Blade holder Messerhaltungen
ページ9に含まれる内容の要旨
MO W I N G AHEA D GGP Sweden AB · Box 1006 · SE-573 28 TRANÅS www.stiga.com
