ページ1に含まれる内容の要旨
MODEL
917.257643
OWNER'S MANUAL
o Assembly
Operation
Customer Responsibilities
®Service and Adjustments
®Repair Parts
CAUTION: Read and follow all safety rules and instructions before operating this equipment.
Iil_..
m
ページ2に含まれる内容の要旨
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FA{LURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. !. GENERAL OPERATION ill CHILDREN • Read, understand, and follow all instructions inthe manual Tragic accidents can occur if the operator is not alert to the and on the machine before starting.. presence of children_Children are often attracted to the mac
ページ3に含まれる内容の要旨
CONGRATULATIONS on your purchase of a Sears PRODUCT SPECIFICATIONS Tractor_ It has been designed, engineered and manufac- H('JRSEPOWI_R: 150 tured to give you the best possible dependability and performance. GASOLINE CAPACITY 5 QUARTS AND TYPE: UNLEADED REGULAR Should you experience any problem you cannot easily remedy, please contact your nearest Sears Authorized i OIL TYPE (APt-SF/SG): SAE 30 (above 32°F) Service CentedDepartmenL We have competent, well- SAE 5W-30 (below 32°F) trained technici
ページ4に含まれる内容の要旨
TABLE OF CONTENTS OPERATION .......................................................... 11-14 SAFETY RULES ............................................................ 2 MAINTENANCE SCHEDULE ...................................... 15 PRODUCT SPECIFICATIONS ...................................... 3 SERVICE AND ADJUSTMENTS ............................ 20-25 CUSTOMER RESPONSIBILITIES ..................... 3, 15-19 STORAGE ................................................................... 26 WARRANTY
ページ5に含まれる内容の要旨
ACCESSORIES AND ATTACHMENTS These accessories and attachments were available through most Sears retail out_etsand service centers when thetractor was purchased.. Most Sears stores can order these items for you when you provide the model number of your tractor° ENGINE MAINTENANCE SPARK PLUG GAS CAN ENGINEOIL FUELSTABILIZER BLADES BELTS ,.q PERFORMANCE Sears offers a wide variety of attachments that fit your tractor_ Many of these are listedbelow with brief explanations of how they can help you..
ページ6に含まれる内容の要旨
.............................. i i? ,,,, ! ................................. IIILIIiiiiiiiiiiii CONTENTS OF HARDWARE PACK Hii i i i i ii, i i i, i,l,llllll, i,l,,i : ......... Parts Bag contents shown full size Parts packed separately in carton Seat ,4 : Steering _ , Boot Steering Wheel (1) Large Flat Washer Mulcher Plate F i,=,- I '(1) Shoulder Bolt 5/16-18 (i) Hex Bolt 1/2-13 x 1 Owners Manual Parts Bag i i nllllii i ................... : Parts bag contents not shown full size /f-_"x\ ((_"_ (2
ページ7に含まれる内容の要旨
ASSEMBLY Your new iractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes, To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely,, Use the correct tools as necessary to insure proper tightness, TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes are listed. (1) 5/16" wrench (1) 3/4" Socket w/drive rachet (2) 7116"wrenches Phillips Screwd
ページ8に含まれる内容の要旨
CONNECT BATTERY (See Figs. 2 and 3) CAUTION: Do not short battery termi- nals. Before connecting battery, re- SEAT bands, rings, etc. PAN move metal bracelets, wristwatch Positive terminal must be connected first to prevent sparking from acciden- tal grounding. . Lift seat pan to raised position_ BATTERY • Open battery box door,, BOXDOOR ° Be sure battery drain tube is attached to battery box. • Remove terminal protective caps and discard, • If this battery is put into service after month and ye
ページ9に含まれる内容の要旨
ASSEMBLY CHECK TIRE PRESSURE ASSEMBLE GAUGE WHEELS TO MOWER DECK (See Fig. 5) The tires on your tractor were ovednflated at the factoryfor shipping purposes_ Correct tire pressure is importantfor Assemble gauge wheels with tractor on a flat level surface. best cutting performance, ° Adjust mower to desired cutting height (See ''TO AD- • Reduce tire pressure to PSI shown in "PRODUCT ,JUST MOWER CUTTING HEIGHT in the Operation SPECIFICATIONS" on page 3 of this manual.,, section of this manual)_ o
ページ10に含まれる内容の要旨
ASSEMBLY INSTALL MULCHER PLATE DEFLECTOR (See Figs. 6 & 7) ° install two latch hooks to mulcher plate using screw, washer, lock washer, and weld nut as shown. NOTE: Pre-assemble weld nut to latch hook by inserting weld nut from the top with hook pointing down° ° Tighten hardware securely° ° Raise and hold deflector shield in upright position. ° Place front of mutcher plate over front of mower deck opening and slide into place, as shown_ ° Hook front latch into hole on front of mower deck_ i Hook
ページ11に含まれる内容の要旨
OPERATI KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrationswith you rtractor to familiarize yourself with the locationsof various controls and adjustments. Save this manual for future reference. IGNITION LIFT LEVER PLUNGER SWITCH LIGHT ATTAGHMENT LIFT LEVER THROTTLEJCHOKE CONTROL ATTACHMENT CLUTCH/BRAKE PEDAL PARKING BRAKE HEIGHT ADJUSTMENT KNOB GEARSHIFT LEVER FIG. 8 Our tractors conform to the safety standards of the American Nati
ページ12に含まれる内容の要旨
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask for over the spectacles or standard safety glasses. • Start tractor with clutch/brake pedal depressed and HOW TO USE YOUR TRACTOR gearshift lever in neutral (N) position. ° Move gearshift and range shift levers to desired posi-
ページ13に含まれる内容の要旨
OPERATION i, TO OPERATE MOWER (See Fig. 10) - Move gearshift lever to 1st gear, Be sure you have allowed room for tractor to roll slightly as you restart Your tractor is equipped with an operator presence sens- movement. ing switch. Any attempt by the operator to leave the seat • To restart movement, slowly release parking brake and withthe engine running andthe attachment clutch engaged clutch/brake pedal. will shut off the engine. ° Make all turns slowly. = Select desired height of cut. o Lowe
ページ14に含まれる内容の要旨
OPERATION TO START ENGINE (See Fig. 9) • When operating attachments, select a ground speed that will suit the terrain and give best performance of When starting engine for the first time or'if engine has run the attachment being used. out of fuel, itwill take extra cranking time to move fue! from the tank to the engine. • Depress clutch/brake pedal and set parking brake. • Place gearshift lever in neutral (N) position, • Move attachment clutch to "DISENGAGED" position° • Move throttle control le
ページ15に含まれる内容の要旨
CUSTOMER RESPONSIBILITIES sc. oo. " FILL IN DATES /_///_t'_?._O_ _ As YOU COMPL_E ./__"" REGu_R SERVICE ............................. /_._"_PSERVICE DATES.,. Check Brake Operation _ &eekTire Pressure J V' T Check, for Loose Fasteners if Sharpen/RePlace Mower Blades C L"brication Cha,t ................. T Clean Battery and Terminals _' 0 Check Transaxle Cooling 6 ## ' a Adjust Blade Beft(s) Tension ....... V Adjus t Motion Driv e Bett(s) Tension ............. i _, ................. :.....,. _ _ _
ページ16に含まれる内容の要旨
CUSTOMER R IBILtTIES TRACTOR MANDREL BLADE Always observe safety ruleswhen performing any mainte_ nanceo ASSEMBLY BRAKE OPERATION tf tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See "TO ADJUST BRAKE" in the Service and Adjust- TRAILING EDGE ments section of this manual). TIRES LOCKWASHER_ "'_ FLAT WASHER l = Maintain proper air pressure in at!tires (See "PROD- UCT SPECIFICATIONS on page 3 of this manual), HEX BOLT • Keep t
ページ17に含まれる内容の要旨
CUSTOMER RES PONSIBnLITmES BATTERY NOTE: Allhough multi-viscosity oils (5W30, 10W30 etc,,) improve starting in cold weather, these multi-viscosity oils Yourtractor hasabatterychargingsystemwhichissuffi- will result in increased oit consumption when used above cient for normal use., However, periodic charging of the 32°F. Check your engine oil level more frequently to avoid battery with an automotive charger will extend its life.. possible engine damage from running low on oil,, - Keep battery an
ページ18に含まれる内容の要旨
......................... • :................. :. , ,,,, .... :JUl II,IIL,Ill CUSTOMER R BIL:ITIES .................... ............ i i,t CLEAN AIR SCREEN (See Fig. 18) AIR FILTER (See Fig. 17) Air screen must be kept free of dirt and chaff to prevent Your engine will not run properly using a dirty air' filter_ engine damage from overheating. Clean with a wire brush Clean the foam pre-cleaner after every 25 hours of opera- or compressedair to remove dirt and stubborn dried gum tion or even,,sea
ページ19に含まれる内容の要旨
CUSTOMER RESPONSIBILITIES MUFFLER CLAMP- CLAMP Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard andlor damage. SPARK PLUGS Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in FUEL "PRODUCT SPECfFICATIONS" on page 3 of this manual. IN-LINE FUEL FILTER (See Fig. 19) FIG, 19 ..... The fuet filter should be replaced once each season,
ページ20に含まれる内容の要旨
SERVICE AND ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. t Place gearshift lever in neutral (N) position. • Q Place attachment clutch in "DISENGAGED" position. e Turn ignition key "OFF" and remove key. Q Make sure the blades and all moving parts have completely stopped. o Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. --al_ TRACTOR LEVER TO REMOVE MOWER (See Fig. 20
