ページ1に含まれる内容の要旨
IMPORTANT MANUAL Do Not Throw Away
OWNER'S MANUAL
WARNING"
MODEL:
Read this Manual and follow all Warnings and
Safety Instructions, Failure to do so can result
in serious injury.
PP16H36RB
LAWN TRACTOR
ALWAYS WEAR EYE PROTECTION DURING OPERATION
Visit our website: www.poulan-pro.com
407139 05.18.06 rad
Printed in U,S,A,
ページ2に含まれる内容の要旨
A SAFETY RULES A Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTINGMACHINEIS CAPABLEOF AMPUTATINGHANDSAND FEETAND THROWINGOBJECTS. FAILURE TO OBSERVETHE FOLLOWINGSAFETY INSTRUCTIONSCOULD RESULTIN SERIOUS INJURYOR DEATH. • Operate machine only in daylight or good artificial light WARNING: In order to prevent ac- • Do not operate the machine while under the influence cidental starting when setting up, of alcohol or drugs transporting, adjusting or making re- • Watch for traffic when
ページ3に含まれる内容の要旨
SAFETY RULES & Safe Operation Practices for Ride-On Mowers II1. CHILDREN GENERAL SERVICE Tragic accidents can occur if the operator is not alert to • Never operate machine in a closed area, the presence of children. Children are often attracted to • Keep all nuts and bolts tight to be sure the equipment is in safe working condition. the machine and the mowing activity. Never assume that • Never tamper with safety devices, Check their proper children will remain where you last saw them, • Keep ch
ページ4に含まれる内容の要旨
CONGRATULATIONS on your purchase of a new tractor. PRODUCT SPECIFICATIONS Ithas been designed, engineered and manufactured to give you the best possible dependability and performance, Gasoline Capacity 2.0 Gallons and type: Unleaded Regular Should you experience any problem you cannot easily remedy, please contact your nearest authorized service Oil Type (API-SG-SL): SAE 30 (above 32°F) SAE 5W-30 (below 32°F) center, We have competent, well-trained technicians and the proper tools to service or
ページ5に含まれる内容の要旨
UNASSEMBLED PARTS Steering Wheel Seat @ (1) Washer 17/32 x 1-3/16 x 12 Gauge Wheel Steering Adapter (1 ) Knob Steering Wheel Insert Battery (2) Keps Nut 1/4-20 (2) Hex Bolts 1/4-20 x 3/4 Steering Boot (1) 5/16 Lock Washer For Future Use Key O (2) Keys Steering Slope Sheet Extension Shaft (1) Large Flat Washer (1) Hex Bolt 5/16-18 x 4
ページ6に含まれる内容の要旨
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness, TOOLS REQUIRED FOR ASSEMBLY INSERT A socket wrench set will make assembly easier, Standard wrench sizes are listed, _16 HEX (2) 7/16" wrenches Utility knife BOLT (1) 3/4" wrenches Tire pressu
ページ7に含まれる内容の要旨
ASSEMBLY • First connect RED battery cable to positive (+) ter- minal with hex bolt and keps nut as shown, Tighten securely. • Connect BLACK grounding cable to negative (-) ter- minal with remaining hex bolt and keps nut. Tighten securely. SEAT PAN • Replace battery cover, Open battery cover for: SHOULDER BOLT • Inspection for secure connections (to tighten hard- ware). • Inspection for corrosion. • Testing battery. • Jumping (if required), FLAT WASHER • Periodic charging, BATTERY ADJUSTMENT KNO
ページ8に含まれる内容の要旨
ASSEMBLY • Sit on seat in operating position, depress clutch/brake Replace discharge chute into rear opening of tractor, pedal and set the parking brake, Secure the chute with the two hook straps. • Place motion control lever in neutral (N) position, • Press lift lever plunger and raise attachment lift lever CLEVIS PIN 10 X 17MM to its highest position, • Remove key from bag and start the engine (see "TO START ENGINE" in the Operation section of this man- 3J8 ,ocK NUT ual), After engine has star
ページ9に含まれる内容の要旨
ASSEMBLY Install and carefully lower bagger to actuate latch, SPREADER BARS Measure distance between bagger and latch as shown, RETAINER SPRING 6MM (1/4") - 9MM (3/8") VINYL TOP SURFACES BINDING HORIZONTAL EVEN ADJUSTMENT RETAINER SPRING BRACKET VERTICAL ADJUSTMENT BRACKET FIG. 5B • Push cap over end of bagger dump handle. NOTE: For futureuse, the clevis pin may be removed in order to use the handle to clear the chute inthe event ithas become BAGGER clogged. DUMP HANDLE TUBE FIG. 6 CLEVIS PIN 10
ページ10に含まれる内容の要旨
ASSEMBLY ,/CHECKL IS T CHECK TIRE PRESSURE BEFORE YOU OPERATE YOUR NEW TRACTOR, WE The tires on your tractor were overinflated at the factory WISH TO ASSURE THAT YOU RECEIVE THE BES T PER- for shipping purposes. Correct tire pressure is important FORMANCEAND SATISFACTION FROM THIS QUALITY for best cutting performance, PRODUCT. • Reduce tire pressure to PSI shown on tires, PLEASE REVIEW THE FOLLOWING CHECKLIST: CHECK DECK LEVELNESS ,/ All assembly instructions have been completed. For best cuttin
ページ11に含まれる内容の要旨
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their mean- ing, R N I'-,I FAST REVERSE NEUTRAL HIGH LOW CHOKE SLOW IGNITION SWITCH G G o, I 6 ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE PARKING BRAKE PARKING BRAKE OPERATION LOCKED UNLOCKED SYSTEM (ROS) @ OVER TEMP FUEL OIL PRESSURE BATTERY REVERSE FORWARD MOWER HEIGHT MOWER LIFT LIGHT ATTACHMENT ATTACHMENT BRAKE/CLUTCH CLUTCH ENGAGED KEEP AREA CLEAR SLOPE HAZARDS CL
ページ12に含まれる内容の要旨
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments, Save this manual for future reference, ATTACHMENT IGNITION CLUTCH LEVER SWITCH SERVICE REMINDER/ ." LIFT LEVER " PLUNGER LIGHT SWITCH ATTACHMENT LIFT LEVER CLUTCH/BRAKE PEDAL THR( CONTROL PARKING BRAKE MOTION CONTROL LEVER FREEWHEEL CONTROL _LV 03092 FIG. 9 Our tractors confo
ページ13に含まれる内容の要旨
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your trac- tor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. NOTE: Under certain conditions when tractor is standing HOW TO USE YOUR TRACTOR idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eli
ページ14に含まれる内容の要旨
OPERATION • Adjust mower to desired cutting height (See "TO AD- REVERSE OPERATION SYSTEM (ROS) JUST MOWER CUTTING HEIGHT" in the Operation Your tractor is equipped with a Reverse Operation System section of this manual), (ROS),Any attempt bythe operator totravel inthe reversedirec- With mower in desired height of cut position, gauge tion with the attachment clutch engaged will shut offthe engine wheels should be assembled so they are slightly off unless ignition key is placed in the ROS "ON" pos
ページ15に含まれる内容の要旨
OPERATION • Do not push or tow tractor at more than two (2) MPH. • To reengage transmission, reverse above procedure. fuel. Do not store, spill or use gasoline NOTE: To protect hood from damage when transporting I & CAUTION: Wipe off any spilled oil or I near an open flame. your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying IMPORTANT: WHEN OPERATING IN TEMPERATURES hood to tractor (rope, cord, etc.). BELOW32°F(0°C), USE FRESH, C
ページ16に含まれる内容の要旨
OPERATION • Place the motion control lever in neutral, MOWING TIPS Release the parking brake and let the clutch/brake • Mower should be properly leveled for best mowing per- slowly return to operating position, formance. See "TO LEVEL MOWER HOUSING" in the • Allow one minute for transmission to warm up, This Service and Adjustments section of this manual. can be done during the engine warm up period. • The left hand side of mower should be used for trim- • The attachmentscan also beused duringth
ページ17に含まれる内容の要旨
OPERATION TO DUMP BAGGER (See Fig.16) PLUG Your tractor is equipped with a Dump Bag Alarm. To turn off the alarm disengage the attachment clutch switch. • Position tractor in location you wish to dump bagger. • Place motion control lever in Neutral position and set parking brake. • Raise dump handle to its highest position. Pull handle forward to raise bagger and dump clippings. • To continue mowing, be sure bagger is down and in proper operating position which will allow mower to operate. FIG.
ページ18に含まれる内容の要旨
MAINTENANCE EVERY EVERY EVERY EVERY EVERY BEFORE BEFORE MAINTENANCE EACH 8 25 5O 100 SEASON STORAGE SCHEDULE USE HOURS HOURS HOURS HOURS Check Brake Operation r, (, Check Tire Pressure T Check Operator Presence & ROS Systems r, i/' t,/ _ Check for Loose Fasteners ChecWReplace Mower Blades v' _ Lubrication Chart Check Battery Level R Clean Battery and Terminals v" Check Transaxle Cooling Check Mower Levelness v' Check V-Belts v' v" Check Enqine Oil Level _#_1,2 Change Engine Oil (with oil filter)
ページ19に含まれる内容の要旨
MAINTENANCE TRACTOR BLADE CARE (See Fig. 19) For best results mower blades must be kept sharp, Replace Always observe safety rules when performing any main- tenance, bent or damaged blades. BRAKE OPERATION If tractor requires more than five (5) feet to stop at highest approved by the manufacturer of your speed in highest gear on a level, dry concrete or paved tractor. Using a blade not approved CAUTION: Use only a replacement blade surface, then brake must be checked and adjusted. (See by the ma
ページ20に含まれる内容の要旨
MAINTENANCE TRANSAXLE PUMP FLUID The transaxle was sealed at the factory and fluid mainte- nance is not required for the life of the transaxle, Should the transaxle ever leak or require servicing, contact your ASSEMBLY FLAT i nearest authorized service center/department, WASHER BLADE BOLT ENGINE LEFT HAND 6 STAR PATTERN LUBRICATION THREADED% 6 STAR CENTER HOLE LOCK Only use high quality detergent oil rated with API service WASHER TRAILING classification SG-SL. Select the oil's SAE viscosity grad
