ページ1に含まれる内容の要旨
IMPORTANT MANUAL Do Not Throw Away
/an
OWNER'S MANUAL
WARNING:
MODEL:
Read this Owner's Manual and follow
all Warnings and Safety Instructions.
Failure to do so can result in serious
injury.
PPR20H42STB
LAWN TRACTOR
ALWAYS WEAR EYE PROTECTION DURING OPERATION
183255 3.4.02 RD
Printed in U.S.A.
I !
ページ2に含まれる内容の要旨
SAFETY RULES '_ Safe Operation Practices for Ride-On Mowers _ IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION • Avoid starting or stopping on a slope. Iftires lose traction, disengage the blades and proceed slowly straight down • Read, understand,andfollow allinstructions inthe manual the slope. and on the machine before starting. DO NOT
ページ3に含まれる内容の要旨
SAFETY RULES & Safe Operation Practices for Ride-On Mowers & Look for this symbol to point out im- portant safety precautions. It means • Be sure the area is clear of other people before mowing. CAUTION!!! BECOMEALERT!!! YOUR Stop machine if anyone enters the area. SAFETY IS INVOLVED. • Never carry passengers or children even with the blades off. • Do not mow in reverse unless absolutely necessary. Al- CAUTION: In order to prevent acciden- ways look down and behind before and while backing. tal
ページ4に含まれる内容の要旨
CONGRATULATIONS on your purchase of a new Tractor. PRODUCT SPECIFICATIONS It has been designed, engineered and manufactured to give GASOLINE CAPACITY 2.0 GALLONS you the best possible dependability and performance. AND TYPE: UNLEADED REGULAR Should you experience any problem you cannot easily remedy, please contact your nearest authorized service OILTYPE (API-SF-SJ): SAE 30 (above 32°F) SAE 5W-30 (below 32°F) center. We have competent, well-trained technicians and the proper tools to service or
ページ5に含まれる内容の要旨
UNASSEMBLED PARTS Seat Steering Wheel Steering Wheel Insert (1) Washer @ 17/32 x 1-3/16 x 12 Gauge Steering Extension (1) Knob Shaft Steering Sleeve Slope Sheet Steering Adapter (1) Large Flat Washer (2) Keys (1) Locknut 1/4-28 For Future Use (1) Locknut 1/2-20 (1) Hex Bolt 1/4-28 x 1-1/4 5
ページ6に含まれる内容の要旨
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY INSERT A socket wrench set will make assembly easier. Standard wrench sizes are listed. 112 HEX NUT Utility knife Pliers (1) 3/4" wrenches Tire pressure gauge LARG
ページ7に含まれる内容の要旨
ASSEMBLY NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the SEAT PAN _I tractor from the skid. TO ROLL TRACTOR OFF SKID (See Operation section, page 10, for location and function of controls) • Press lift lever plunger and raise attachment lift lever to its highest position. • Release parking brake by depressing clutch/brake pedal. • Place freewheel control in freewheeling position to disengage transmission (See'qO TRANSPORT" in the
ページ8に含まれる内容の要旨
ASSEMBLY CHECK TIRE PRESSURE IMPORTANT: FOR SHIPPING PURPOSES, THE MULCHER PLATE WAS PREATTACHED TO YOUR The tires on your tractor were overinflated at the factory for MOWER. THE MULCHER PLATE MUST ONLY BE USED shipping purposes. Correct tire pressure is important for WITH THE MULCHING BLADES THAT CAME PACKED best cutting performance. SEPARATELY IN THE CARTON. • Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual. YOUR MOWER CAME FACTORY EQUIPPED WITH HIGH PERFOR
ページ9に含まれる内容の要旨
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. t A BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING I L ENGINE ON ENGINE OFF OIL PRESSURE LIGHTS ON OVER TEMP LIGHT ! MOWER LIFT FUEL CHOKE MOWER HEIGHT PARKING BRAKE UNLOCKED LOCKED R N H L ATTACHMENT REVERSE NEUTRAL HIGH LOW PARKING BRAKE CLUTCH ENGAGED KEEP AREA CLEAR SLOPE HAZARDS ATTACHMENT (SEE SAFETY RULES SECTION) CLUTCH DISENGAGED IGNITION FREE WHEEL DA
ページ10に含まれる内容の要旨
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrationswith your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. IGNITION LIGHT ATTACHMENT SWITCH SWITCH AMMETER CLUTCH LEVER POSITION CHOKE LIFT LEVER PLUNGER THROTTLE CHMENT LIFT LEVER CLUTCH/BRAKE PEDAL o HEIGHT ADJUSTMENT INDICATOR PARKING BRAKE 3TION FREE WHEEL CONTROL CONTROL' LEVER FIG. 5 Our tr
ページ11に含まれる内容の要旨
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY HOW TO USE YOUR TRACTOR POSITION OTHER THAN "OFF" WILL CAUSE THE BATTERY TO BE DISCHARGED, (DEAD). TO SET PARKING BRAKE (See Fig
ページ12に含まれる内容の要旨
OPERATION TO ADJUST GAUGE WHEELS (See Fig. 7) "ENGAGED" POSITION Gauge wheels are properly adjusted when they are slightly _ TTACHMENT off the ground when mower is atthe desired cutting heightin LIFT LEVER HIGH POSITION operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. NOTE:Adjust gauge wheels with tractor on a flat level surface. if/ • Adjust mower to desired cutting height (See "TO AD- JUST MOWER CUTTING HEIGHT" in the O
ページ13に含まれる内容の要旨
OPERATION CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moistu re wh ich leads to sepa- A ration and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for
ページ14に含まれる内容の要旨
OPERATION • Move motion control lever to neutral (N) position. Shut- AUTOMATIC TRANSMISSION WARM UP off engine and set parking brake. • Before driving the unit in cold weather, the transmission • Engage transmission by placing freewheel control in should be warmed up as follows: driving position (See "TO TRANSPORT" in this section • Be sure the tractor is on level ground. of manual). • Place the motion control lever in neutral. Release • Sitting in thetractor seat, start engine. After the engine
ページ15に含まれる内容の要旨
OPERATION MULCHING MOWING TIPS MAX 1/3 IMPORTANT: FOR BEST PERFORMANCE, KEEP MOWER HOUSING FREE OF BUILT-UP GRASS AND TRASH. CLEAN AFTER EACH USE. • Thespecialmulchingbladewillrecutthegrassclippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biodegrade quickly to provide nutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recutting ac
ページ16に含まれる内容の要旨
CUSTOMER RESPONSIBILITIES F'LL 'N DATES /_. ___ _/_5___ 2z_._x_ _xx/_ ___ _7 AS YOU COMPLETE REGULARSERVICE /____TSERVICE DATES __BBB _ Check Brake Operation V p V' Check Tire Pressure I_ V p Check Operator Presence and T Interlock Systems V' a Check for Loose Fasteners V' V'5 t_ A Sharpen/Replace Mower Blades 1_3 C Lubrication Chart V' 0 Check Battery Level !_4 R Clean Battery and Terminals I_ I_ Check Transaxle Cooling V' Check V-Belts V' Check Engine Oil Level I_ V' Change Engine Oil (with oi
ページ17に含まれる内容の要旨
CUSTOMER RESPONSIBILITIES TRACTOR TRAILING MANDREL EDGE UP ASSEMBLY Always observe safety rules when performing any mainte- BLADE nance. \ CENTER BRAKE OPERATION If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See"TO ADJUST BRAKE" in the Service and Adjustments section of this manual). LockWAS.E. \ TIRES • Maintainproperairpressureinalltires(See"PRODUCT SPECIFICATIONS" section of this manual). • Keep tires free of gasoline
ページ18に含まれる内容の要旨
CUSTOMER RESPONSIBILITIES SAE VISCOSITY GRADES BATTERY Your tractor has a battery charging system which is suffi- cient for normal use. However, periodic charging of the battery with an automotive charger will extend its life. F -2o o 3o 324o 6o 8o ,oo • Keep battery and terminals clean. c -3o -2o -,o 6 ;o 2o 3o 4o • Keep battery bolts tight. TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE • Keep small vent holes open. FIG. 14 • Rechargeat 6-10amperes for 1 hour. NOTE: Although multi-viscos
ページ19に含まれる内容の要旨
CUSTOMER RESPONSIBILITIES MUFFLER CLEAN AIR SCREEN Inspect and replace corroded muffler and spark arrester (if Air screen must be kept free of dirt and chaff to prevent equipped) as it could create a fire hazard and/or damage. engine damage from overheating. Clean with a wire brush or compressed airto remove dirt and stubborn dried gum fibers. SPARK PLUGS CLEAN AIR INTAKE/COOLING AREAS Replace spark plugs at the beginning of each mowing To insure proper cooling, make sure the grass screen, seaso
ページ20に含まれる内容の要旨
SERVICE AND ADJUSTMENTS WARNING: TO AVIOD SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. Place motion control lever in neutral (N) position. • Place attachment clutch in "DISENGAGED" position. • Turn ignition key to"STOP" and remove key. • Make sure the blades and all moving parts have completely stopped. • Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TRACTOR IMPORTANT:
