ページ1に含まれる内容の要旨
Pro 925 ZX
Pro 950 ZX
968999516
968999507
Operator´s manual
Please read the operator’s manual carefully and make sure
you understand the instructions before using the machine.
English
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
OPERATOR’S MANUAL RIDER Z SERIES Moving by Hand ..................................................... 33 Contents Maintenance ......................................................... 34 Contents...................................................................1 Maintenance Schedule...................................... 34 Introduction .............................................................3 Battery............................................................... 36 Congratulations.........
ページ4に含まれる内容の要旨
WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance. WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals
ページ5に含まれる内容の要旨
INTRODUCTION Introduction Congratulations Thank you for purchasing a Poulan ride-on mower. This machine is built for the greatest efficiency and rapid mowing primarily of large areas. Controls in one place and a hydrostatic transmission regulated by steering controls also contribute to the machine’s performance. This manual is a valuable document, read the manual carefully before using or servicing the machine. Following the instructions (use, service, maintenance, etc.) by all who operate th
ページ6に含まれる内容の要旨
INTRODUCTION Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal injury or property damage. Good Service Poulan’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate i
ページ7に含まれる内容の要旨
SYMBOLS AND DECALS Symbols and Decals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxxxxx xxxx xxxxxxxx xxx x Xxxxx xxxxxx xx. xx xxxxxxxx xxxxx xxx xx. Used in this publication to notify the reader of a risk of personal injury or death, particularly if the reader does not follow instructions given in the manual. IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx xx. Used in this publication to
ページ8に含まれる内容の要旨
SYMBOLS AND DECALS Read Shut off engine Keep a safe Use on No Operators & remove key distance from slopes no passengers Manual before the machine. greater performing any than 10°. maintenance or repair work. Whole Severing Do not open Careful Careful going body of fingers or remove backing up, forward, exposure & toes. safety watch for watch for to thrown shields while other people. other people. objects. engine is running. Moving sharp blades under cover English-6
ページ9に含まれる内容の要旨
SAFETY INSTRUCTIONS Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. General Operation • Read, understand, and follow all instructions on the machine and in the manu
ページ10に含まれる内容の要旨
SAFETY INSTRUCTIONS • Disengage blades when not mowing. Shut off engine and wait for all parts to WARNING! come to a complete stop before cleaning Engine exhaust and certain the machine, removing the grass vehicle components contain catcher, or unclogging the discharge or emit chemicals considered guard. to cause cancer, birth defects, • Operate machine only in daylight or good or other reproductive system artificial light. damage. The engine exhaust contains carbon monoxide, • Do n
ページ11に含まれる内容の要旨
SAFETY INSTRUCTIONS Personal Safety Equipment WARNING! When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment. • Make sure that you have first aid equipment close at hand when using the machine. • Never use the machine when barefoot. Always wear protecti
ページ12に含まれる内容の要旨
SAFETY INSTRUCTIONS • Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do not use on steep slopes. • Do not try to stabilize the machine by putting your foot on the ground. • Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in. • Do not make any sudden changes in speed or direction. • Take extra care if any attachments are
ページ13に含まれる内容の要旨
SAFETY INSTRUCTIONS Maintenance WARNING! The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed. Safe Handling of Gasoline To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition. • Use only approved gasoline container. • Never remove gas cap or add fuel wit
ページ14に含まれる内容の要旨
SAFETY INSTRUCTIONS • Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fuel to expand and overflow. General Maintenance • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the equipment is in safe working condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris build-up. Clean
ページ15に含まれる内容の要旨
SAFETY INSTRUCTIONS corrosive burns. If you spill battery acid on your skin, rinse immediately with water. • Acid in the eyes can cause blindness, contact a doctor immediately. • Be careful when servicing the battery. Explosive gases form in the battery. Never perform maintenance on the battery when smoking or near open flames or sparks. The battery can explode and cause serious injury/damage. • Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are p
ページ16に含まれる内容の要旨
SAFETY INSTRUCTIONS exhaust fumes contain carbon monoxide, an odorless, poisonous, and lethal gas. • Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting. • Never make adjustments with the engine running. • The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer. Only use approved repair parts for the machine. • The blades are sharp and can cause cuts and gashes. Wrap the bla
ページ17に含まれる内容の要旨
SAFETY INSTRUCTIONS • Do not tow any trailers, etc. with this mower. They may jackknife or overturn causing damage to the mower and possibly serious injury to the operator. • Load into truck or trailer by driving up ramps in low gear. DO NOT LIFT! This machine is not intended to blifted by hand. Customer responsibilities • Read and observe the safety rules. • Follow a regular schedule in maintaining, caring for and using your mower. • Follow the instructions under "Maintenance” and "Stor
ページ18に含まれる内容の要旨
CONTROLS Controls This operator’s manual describes the Poulan Zero Turn Rider. The rider is fitted with a Briggs and Stratton four-stroke engine developing 22 horse power. Transmission from the engine is made via two belt-driven hydrostat transaxles, one for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed. 8011-6482 Zero Turn Rider 8011-7352 Locations of the controls Control Locations Page Page 1. Motion control, le
ページ19に含まれる内容の要旨
CONTROLS 1. Motion Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward. When both controls are in the neutral position (N), the machine stands still. By moving both controls an equal amount forward or backward, the machine moves in a straight line forwa
ページ20に含まれる内容の要旨
CONTROLS 2. Seat adjustment knobs The seat can be adjusted lengthways. When making adjustments, loosen the four knobs under the seat pan, after which the seat can be moved backward or forward. Do not forget to tighten the knobs. CZ-1 Lengthways adjustment 3. Fuses The fuses are located in the right front corner of the engine compartment. They are flat pin fuses of the same type used in automobiles. There are two fuses. Fuse ratings and functions: • 20 A, Primary fuse. • 7.5 A, Mower deck
