ページ1に含まれる内容の要旨
IMPORTANT MANUAL Do Not Throw Away
02139
OWNER'S MANUAL
WARNING:
MODEL: Read the Owner's Manual and fol low
all Warn ings and Safety In struc tions.
Fail ure to do so can result in seri-
ous injury.
PDGT26H54A
LAWN TRACTOR
Always Wear Eye Protection During Operation
188724 Rev. 2 4.16.04 TR/MH
Printed in U.S.A.
ページ2に含まれる内容の要旨
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. DO NOT: I. GENERAL OPERATION Do not turn on slopes unless necessary, and then, Read, understand, and follow all instructions in the turn slowly and gradually downhill, if possible. manual and on the machine before starting. Do not
ページ3に含まれる内容の要旨
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area. WARNING: In order to prevent ac- Never carry passengers or children even with the blades ci den tal starting when setting up, off. trans port ing, ad just ing or making re- Do not mow in reverse unless absolutely necessary. Al ways pairs, alwa ys dis con nect spark plug look down and behind before and while backing. wire
ページ4に含まれる内容の要旨
CONGRATULATIONS on your purchase of a new tractor. PRODUCT SPECIFICATIONS It has been designed, engineered and manu fac tured to give Gasoline Capacity 5.0 Gallons you the best possible dependability and performance. and type: Unleaded Regular Should you experience any problem you cannot easily rem- Oil Type (API-SG-SL): SAE 30 (above 32°F) edy, please contact your nearest authorized service center/ SAE 5W-30 (below 32°F) department We have competent, well-trained tech ni cians Oil C
ページ5に含まれる内容の要旨
UNASSEMBLED PARTS Steering Wheel Gauge Wheels Steering Sleeve (4) Washers 3/8 x 3/4 x 14 Ga. (4) Wheels (4) Adjusting Bars Steering Sleeve Premium (4) Clevis Pins Extension Steering Adapter Steering Wheel Insert (4) Retainer Springs Seat (4) Locknuts (double loop) 3/8-16 (4) Shoulder Bolt (1) Washer 17/32 x 1-3/16 x 12 Mower Gauge (1) Knob (2) Flanged Pins Nose Roller (2) Retainer Springs (double loop) Nose Roller Brackets Keys Slope Sheet Retainer (2) Keys Spring
ページ6に含まれる内容の要旨
02173 ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Stan dard STEERING WHEEL wrench sizes are listed. INSERT (1) Pliers (1) Tire pressure gauge LOCK NUT
ページ7に含まれる内容の要旨
ASSEMBLY Be sure all the above assembly steps have been com- INSTALL SEAT (See Fig. 3) pleted. Adjust seat before tightening adjustment knob. Check engine oil level and fi ll fuel tank with gasoline. Remove adjustment knob and fl at washer securing seat to cardboard packing and set aside for assembly Place freewheel control in "trans mis sion engaged" of seat to tractor. po si tion (see "TO TRANSPORT" in Operation section Pivot seat upward and remove from the cardboard
ページ8に含まれる内容の要旨
02786 ASSEMBLY Remove plastic tie strap from mower belt and check TO ATTACH NOSE ROLLER (See Fig. 6) belt for proper routing in all mower pulley grooves. Assemble brackets "A" and "B" to the inside of mower Slide mower under tractor until it is centered under trac- mounting brackets as sho wn. Tighten securely. tor. DO NOT connect any pins. When properly centered NOTE: Be sure bracket tabs are po si tioned in tab holes the front mower brackets should be aligned so when in m
ページ9に含まれる内容の要旨
ASSEMBLY IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL ✓CHE CKLIST MOWER PULLEY GROOVES. BEFORE YOU OPERATE AND ENJOY YOUR NEW TRAC- Engage belt tension rod on locking bracket. TOR, WE WISH TO ASSURE THAT YOU RE CEIVE THE BEST PER FORM ANCE AND SATISFACTION FROM THIS CAUTION: Belt tension rod is spring QUAL ITY PROD UCT. loaded. Have a tight grip on rod and engage slowly. PLEASE REVIEW THE FOLLOWING CHECKLIST: ✓ All assembly instructions have been completed. Raise attachm
ページ10に含まれる内容の要旨
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their mean- ing. IGNITION REVERSE HIGH LOW FAST SLOW NEUTRAL CHOKE P LIGHTSON ENGINESTART ENGINEON PARKINGBRAKE PARKINGBRAKE PARKINGBRAKE ENGINEOFF LOCKED UNLOCKED OILPRESSURE FUEL BATTERY REVERSE FORWARD OVERTEMP MOWERHEIGHT MOWERLIFT LIGHT 15 15 ATTACHMENT ATTACHMENT SLOPEHAZARDS CLUTCHENGAGED DANGER,KEEPHANDS KEEPAREACLEAR CLUTCHDISENGAGED ANDFEETAWAY (SEESAFETYRULESSECTION) DA
ページ11に含まれる内容の要旨
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR. Compare the illustrations with your tractor to familiarize yourself with the location of various controls and adjustments. Save this man ual for future reference. HOURMETER LIGHT SWITCH POSITION IGNITION CHOKE CON TROL SWITCH AMMETER THROTTLE ATTACHMENT CONTROL CLUTCH SWITCH BRAKE PEDAL LIFT LEVER PLUNGER MOTION DRIVE BELT TENSION LIFT LEVER HAN DLE PARKING BRAKE LEVER MOTION CONTROL
ページ12に含まれる内容の要旨
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while op- erating your tractor or per form ing any adjustments or repairs. We rec om mend a wide vision safety mask over spectacles or stan dard safety glasses. NOTE: Under certain conditions when tractor is standing HOW TO USE YOUR TRACTOR idle with the engine running, hot en gine exhaust gases may cause “browning”
ページ13に含まれる内容の要旨
02142 01977 OPERATION TO ADJUST GAUGE WHEELS (See Fig. 10) LIFT LEVER HIGHEST Gauge wheels are properly adjusted when they are slightly POSIITON off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. LOWEST POSITION NOTE:Adjust gauge wheels with tractor on a fl at level surface. Adjust mower to desired cutting height (See “TO AD- ATTACHEMNT JUST MOWER
ページ14に含まれる内容の要旨
OPERATION CAUTION: Alcohol blended fuels (called gas o hol or using ethanol or methanol) can at- tract moisture which leads to sep a ra tion and forma tion of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before stor age of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next sea son. See Stor
ページ15に含まれる内容の要旨
OPERATION Remove retainer spring from the drive belt tension Engage transmission by placing freewheel control in handle to relieve belt tension. driving position (See “TO TRANSPORT” in this sec tion of manual). Start engine and allow it to warm up for three (3) min- utes. Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. Shut-off engine and engage parking brake. Disengage parking brake. Engage dri
ページ16に含まれる内容の要旨
maint_sch-tractore.new1 MAINTENANCE MAINTENANCESCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation Check Tire Pressure Check Operator Presence and Interlock Systems T Check for Loose Fasteners R 5 A Sharpen/Replace Mower Blades 3 C Lubrication Chart T Check Battery Level 4 0 Clean Battery and Terminals R Check Transaxle Cooling Check V-Belts Check Engine Oil Level Change Engine Oil (with oil filter) 1,2 Change Engine Oil (without oil filter) 1,2 E Clean Air
ページ17に含まれる内容の要旨
02544 MAINTENANCE TRACTOR MANDREL BLADE ASSEMBLY Always observe safety rules when performing any main- te nance. CENTER HOLE BRAKE OPERATION BLADE BOLT If tractor requires more than six (6) feet stopping distance (SPECIAL) at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Ad just ments section of this manual). STAR TIRES Maintain proper air pressure in all tires (See “PROD UCT FIG. 14 SPECIFICATIONS” section of this manual). K
ページ18に含まれる内容の要旨
02791 MAINTENANCE TO CLEAN BATTERY AND TERMINALS NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils Corrosion and dirt on the battery and terminals can cause will result in increased oil consumption when used above the battery to “leak” power. 32°F. Check your engine oil level more frequently to avoid Remove terminal guard. possible engine damage from running low on oil. Disconnect BLACK battery cable fi rst then R
ページ19に含まれる内容の要旨
00667 MAINTENANCE CLEAN AIR SCREEN IN-LINE FUEL FILTER (See Fig. 18) Air screen must be kept free of dirt and chaff to prevent The fuel fi lter should be replaced once each season. If fuel engine dam age from overheating. Clean with a wire brush fi lter becomes clogged, ob struct ing fuel fl ow to car bure tor, or com pressed air to re move dirt and stubborn dried gum re place ment is re quired. fi bers. With engine cool, remove fi lter and plug fuel line sec- tions. AIR FILTER Plac
ページ20に含まれる内容の要旨
02786 SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR AD JUST MENTS: Depress brake pedal fully and set parking brake. Place attachment clutch in “DISENGAGED” position. Turn ignition key to “STOP” and remove key. Make sure the blades and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. Slide mower out from under right side of tractor. TRACTOR
