ページ1に含まれる内容の要旨
IMPORTANT MANUAL Do Not Throw Away
02153
WARNING:
OWNER'S MANUAL
Read this Owner's Manual and
fol low all Warnings and Safety
In struc tions. Failure to do so can
MODEL:
result in serious injury.
PD20PH48STB
LAWN TRACTOR
Always Wear Eye Protection During Operation
186666 Rev. 3 08.15.03 RD/TR
Printed in U.S.A.
ページ2に含まれる内容の要旨
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. Avoid starting or stopping on a slope. If tires lose trac- I. GENERAL OPERATION tion, disengage the blades and proceed slowly straight Read, understand, and follow all instructions in the down the slope. manual and on the machine before
ページ3に含まれる内容の要旨
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area. WARNING: In order to prevent ac ci - den tal starting when setting up, trans- Never carry passengers or children even with the blades off. por t ing, ad just ing or making repairs, al ways dis con nect spark plug wire Do not mow in reverse unless absolutely necessary. Al ways and place wire where it can not contact look
ページ4に含まれる内容の要旨
CONGRATULATIONS on your purchase of a new tractor. PRODUCT SPECIFICATIONS It has been designed, engineered and manu factured to giv e you the best possible dependability and performance. Gasoline Capacity 4.0 Gallons and type: Unleaded Regular Should you experience any problem you cannot easily rem- edy, please contact your nearest authorized service center/ Oil Type (API-SF-SJ): SAE 10W30 (above 32°F) department. We have competent, well-trained tech ni cians SAE 5W-30 (below 32°F) an
ページ5に含まれる内容の要旨
UNASSEMBLED PARTS Gauge Wheels Steering Wheel (4) Shoulder Bolts (4) Wheels (4) Adjusting Bars Steering Sleeve Steering Sleeve (4) Clevis Pins Extension (4) Washers 3/8 x 3/4 x 14 Ga. Steering Steering Wheel Adapter Wheel Insert (4) Retainer Springs (4) Locknuts 3/8-16 (double loop) Seat Nose Roller Rod (1) Washer 17/32 x 1-3/16 x 12 Gauge (2) Locknuts 5/16-18 Retainer Spring (1) Knob Nose Roller Mower Brackets (2) Flanged (2) Hex Bolts Pins 5/16-18 x 1 (1) Front Plate
ページ6に含まれる内容の要旨
02173 ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping pur- poses. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY STEERING WHEEL A socket wrench set will make assembly easier. Stan dard INSERT wrench sizes are listed. LOCK NUT (2) 9/16" wrench Utility knife LAR
ページ7に含まれる内容の要旨
ASSEMBLY TO DRIVE TRACT OR OFF SKID (See Op- INSTALL SEAT (See Fig. 3) er a tion section for location and function of Adjust seat before tightening adjustment knob. con trols) Remove adjustment knob and fl at washer securing WARNING: Before start ing, read, un der stand and fol low seat to cardboard packing and set aside for assembly of seat to tractor. all in struc tions in the Op er a tion section of this manu al. Be sure tractor is in a well-ventilated area. Be sure the area in
ページ8に含まれる内容の要旨
02510 ASSEMBLY Lower mower linkage with attachment lift control. TO ATTACH NOSE ROLLER (See Fig. 5) Be sure belt tension rod is in dis en gaged position. Assemble brackets "A" and "B" to the inside of mower mounting brackets as sho wn. Tighten securely. Install belt into electric clutch pulley groove. Place the suspension arms on outward pointing deck NOTE: Be sure bracket tabs are po si tioned in tab holes pins. Retain with double loop re tain er spring with loop
ページ9に含まれる内容の要旨
ASSEMBLY CHECK TIRE PRESSURE ✓CHECKLIST The tires on your tractor were overinfl ated at the factory BEFORE YOU OPERATE AND ENJOY YOUR NEW TRAC- for shipping purposes. Correct tire pressure is important T OR, WE WISH TO ASSURE THAT YOU RECEIVE THE for best cutting performance. BEST PER FOR MANCE AND SATISFACTION FROM THIS Reduce tire pressure to PSI shown in “PRODUCT QUALITY PROD UCT. SPEC I FI CATIONS” section of this manual. PLEASE REVIEW THE FOLLOWING CHECKLIST: ✓ All assembly inst
ページ10に含まれる内容の要旨
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their mean- ing. IGNITION REVERSE HIGH LOW FAST SLOW NEUTRAL CHOKE P LIGHTSON ENGINESTART ENGINEON PARKINGBRAKE PARKINGBRAKE PARKINGBRAKE ENGINEOFF LOCKED UNLOCKED FUEL OILPRESSURE BATTERY REVERSE FORWARD OVERTEMP MOWERHEIGHT MOWERLIFT LIGHT 15 15 ATTACHMENT ATTACHMENT SLOPEHAZARDS CLUTCHENGAGED CLUTCHDISENGAGED DANGER,KEEPHANDS KEEPAREACLEAR ANDFEETAWAY (SEESAFETYRULESSECTION) DA
ページ11に含まれる内容の要旨
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. IGNITION LIGHT SWITCH AMMETER SWITCH POSITION CHOKE AT TACHMENT CLUTCH SWITCH CONTROL LIFT LEVER THROTTLE PLUNGER CONTROL ATTACHMENT BRAKE LIFT LEVER PEDAL HEIGHT REVERSE DRIVE PEDAL ADJUSTMENT KNOB FORWARD DRIVE PEDAL FREEWHE
ページ12に含まれる内容の要旨
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any adjustments or repairs. We rec om mend a wide vision safety mask over spectacles 00155 or stan dard safety glasses. NOTE: Under certain conditions when tractor is standing HOW TO USE YOUR TRACTOR idle with the engine running, hot en gine exhaust gases may TO SET PARKI
ページ13に含まれる内容の要旨
02142 01977 OPERATION TO ADJUST MOWER CUTTING HEIGHT TO OPERATE MOWER (See Fig. 10) (See Fig. 8) Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with The cutting height is controlled by turning the height ad- the engine running and the attachment clutch engaged will just ment knob in desired direction. shut off the engine. Turn knob clockwise ( ) to raise cutting height. Select desired height of cut. Turn knob
ページ14に含まれる内容の要旨
OPERATION ADD GASOLINE TO TRANSPORT (See Figs. 7 and 11) Fill fuel tank to bottom of fi ller neck. Do not overfi ll. When pushing or towing your tractor, be sure to disengage Use fresh, clean, regular un lead ed gasoline with a transmission by placing freewheel control in free wheel ing minimum of 87 octane. (Use of leaded gasoline will po si tion. Free wheel control is located at the rear drawbar increase carbon and lead oxide deposits and reduce of tractor. valve life). Do not
ページ15に含まれる内容の要旨
OPERATION The attachments and ground drive can now be used. If NOTE: During this procedure there will be no movement the engine does not accept the load, restart the engine of drive wheels. The air is being removed from hydraulic and allow it to warm up for one minute using the choke drive system. as described above. Shut- off engine and set parking brake. COLD WEATHER STARTING (50° F and below) Engage transmission by placing freewheel control in When engine starts, sl
ページ16に含まれる内容の要旨
maint_sch-tractore.new1 MAINTENANCE MAINTENANCESCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation Check Tire Pressure Check Operator Presence and Interlock Systems T R Check for Loose Fasteners 5 A Sharpen/Replace Mower Blades 3 C Lubrication Chart T Check Battery Level 4 0 Clean Battery and Terminals R Check Transaxle Cooling Check V-Belts Check Engine Oil Level Change Engine Oil (with oil filter) 1,2 Change Engine Oil (without oil filter) 1,2 E Clean Air
ページ17に含まれる内容の要旨
02544 MAINTENANCE TRACTOR MANDREL BLADE ASSEMBLY Always observe safety rules when performing any main- CENTER te nance. HOLE BRAKE OPERATION BLADE BOLT If tractor requires more than six (6) feet stopping distance (SPECIAL) at high speed in highest gear, then brake must be adjusted. STAR (See “TO ADJUST BRAKE” in the Service and Ad just ments section of this manual). FIG. 13 TIRES Maintain proper air pressure in all tires (See “PROD UCT TO SHARPEN BLADE (See Fig. 14) SPECIFICATIONS” se
ページ18に含まれる内容の要旨
MAINTENANCE Remove terminal guard. TO CHANGE ENGINE OIL (See Figs. 15 and 16) Disconnect BLACK battery cable fi rst then RED bat- Determine temperature range expected before oil change. ter y cable and remove battery from tractor. All oil must meet API service classifi cation SF-SJ. Rinse the battery with plain water and dry. Be sure tractor is on level surface. Clean terminals and battery cable ends with wire brush Oil will drain more freely when warm. until br
ページ19に含まれる内容の要旨
00667 MAINTENANCE CLEAN AIR INTAKE/COOLING AREAS MUFFLER To insure proper cooling, make sure the grass screen, Inspect and replace corroded muffl er and spark arrester cooling fi ns, and other external surfaces of the engine are (if equipped) as it could create a fi re hazard and/or dam- kept clean at all times. age. Every 100 hours of operation (more often under extremely SPARK PLUGS dusty, dirty conditions), remove the blower housing and Replace spark plugs at the beginning of each mowing
ページ20に含まれる内容の要旨
SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: Depress brake pedal fully and set parking brake. Place attachment clutch in “DISENGAGED” position. Turn ignition key to “STOP” and remove key. Make sure the blades and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. Slide mower under tractor with defl ector shield to
