ページ1に含まれる内容の要旨
Household Beverage Cooler
Record Serial/Model Numbers ………………....2
Important Safety Instructions ……….………….2
First Steps …………………………….……………3
General Operation ………………………………..6
Helpful Hints ………………………….……………7
Energy Saving Tips ..……………..………………8
Beverage Cooler Features ………………………8
Cleaning and Maintenance ……………….……..8
Warranty …………………………………….….…10
Troubleshooting Guide ………………………...11
ページ2に含まれる内容の要旨
• Destroy or safely discard carton, plastic bags, and any exterior wrapping material immediately after the beverage cooler is unpacked. Children should never use these items This Use and Care Manual provides specific operating to play. Cartons covered with rugs, bedspreads, plastic instructions for your model. Use your beverage cooler only sheets or stretch wrap may become airtight chambers, and as instructed in this manual. These instructions are not can quickly cause
ページ3に含まれる内容の要旨
• If voltage varies by 10% or more, performance of your beverage cooler may be affected. Operating beverage cooler with insufficient power can damage the This Use and Care Manual provides specific assembly, compressor. operating and maintenance instructions for your model. Use • To prevent the beverage cooler from being turned off the beverage cooler only as instructed in this Use and Care Manual. Before starting the beverage cooler, follow these accidentally, do not plug unit
ページ4に含まれる内容の要旨
BEVERAGE DELIVERY KIT BOX (9) Faucet and Shank Assembly 1 piece (10) Plastic Collar 1 piece (11) Shank Nut 1 piece (12) Faucet Knob 1 piece (13) Regulator 1 piece (14) Keg Coupler 1 piece (15) Clear Hose (Delivery Line) 1 piece (16) Red Hose (Gas Line) 1 piece (17) Rubber Washer (Black) 2 pieces (18) Plastic Hose Clamp (White
ページ5に含まれる内容の要旨
CO CANISTER BRACKET INSTALLATION REGULATOR INSTALLATION 2 • Align the two bracket holes with the screw anchor holes • Fasten the CO regulator (13) to the CO canister (19), 2 2 located on the lower left side of the cabinet (the actual tightening the nut securely. DO NOT over tighten. Over screw anchor holes are centered behind the taped hole). tightening may damage the gasket in nut of the regulator. • Secure the CO canister bracket (4) to the cabinet with 2 TM the two
ページ6に含まれる内容の要旨
CLEAR HOSE TO DOOR PANEL CONNECTION DELIVERY HOSE ARRANGEMENT • Place the supplied rubber washer (17) inside the hex nut • Insert the clear hose (15) (delivery hose) into the hose on the other end of the clear hose (15) (beverage delivery routing clips (8) attached to the door panel. Once the line) and attach to shank protruding from the door panel hoses are properly secured, the CO canister valve can 2 now be opened. (15) CLEAR HOSE (8) HOSE (15) CLEAR HOSE ROUTI
ページ7に含まれる内容の要旨
• With the canister valve still in closed position, reattach the OPERATING YOUR BEVERAGE COOLER regulator to the new canister using an adjustable wrench. Tighten nut until it feels snug but be careful not to over • Make sure that the beverage cooler is plugged in tighten as you will damage the gasket inside the stem nut. properly to a 115V, 60Hz AC only electrical outlet. Refer • Check to make sure that the red gas line hose is still to Electrical Information on page 2. se
ページ8に含まれる内容の要旨
BEER STORAGE TEMPERATURE OPTIONAL CASTER KIT • Draft beer is not pasteurized, so it must be kept cold, If you’d like to make your beverage cooler so it can be rolled from room to room, there is an optional caster kit available preferably at 38ºF. Temperatures above 38ºF may cause from your authorized Frigidaire dealer or service center. Just the beer to become wild, turn sour and cloudy. ask for part number 297027300 - Caster, Rail and Hardware Kit, which includes 2 fixed
ページ9に含まれる内容の要旨
• Remove the coupler from keg by rotating it DOOR REMOVAL counterclockwise. • Remove the red hose (gas line) from the coupler. Make If door must be removed: sure the canister valve and regulator shut-off valve is shut • Gently lay the beverage cooler on its back, on a rug or off before removing the hose. blanket. • Remove the faucet from the shank assembly by turning the • Remove plastic top hinge cover. threaded stainless steel collar clockwise using a faucet • Remo
ページ10に含まれる内容の要旨
BEVERAGE COOLER WARRANTY Your beverage cooler is protected by this warranty WARRANTY THROUGH OUR AUTHORIZED SERVICERS, THIS CONSUMER WILL BE RESPONSIBLE FOR: PERIOD WE WILL: FULL ONE-YEAR One year from Pay all costs for repairing or replacing any parts of Costs of service calls that are listed under NORMAL WARRANTY original purchase this appliance which prove to be defective in RESPONSIBILITIES OF THE CONSUMER.* date materials or workmanship. ND TH LIMITED 2
ページ11に含まれる内容の要旨
Before calling for service, review this list. It may save you time and expense. This list TROUBLESHOOTING includes common occurrences that are not the result of defective workmanship or GUIDE materials in this appliance. PROBLEM CAUSE CORRECTION BEVERAGE COOLER OPERATION Beverage cooler does not run. • Beverage cooler is plugged into a cir cuit that has a • Use another circuit. If you are unsure about the ground fault interrupt. outlet, have it checked by a certifie
ページ12に含まれる内容の要旨
SOUND AND NOISE (Cont.) Vibrating or rattling noise. • Beverage cooler is touching the wall. • Move beverage cooler slightly away from the wall. Snapping sound. • Cold control turning beverage cooler on and off. • This is normal. WATER / MOISTURE / FROST INSIDE BEVERAGE COOLER Moisture forms on inside of • Weather is hot and humid. • This is normal. beverage cooler walls. • Door may not be seating properly. • See “DOOR PROBLEMS” Section. • Do
ページ13に含まれる内容の要旨
3 Ways To Contact Us! ¡3 formas de contactarnos! 3 façons de nous contacter ! USA, EE.UU., É.-U. 1-800-944-9044 CANADA, CANADÁ 1-866-213-9397 (English) 1-866-294-9911 (Français) Or, O, Ou USA, EE.UU., É.-U. CANADA, CANADÁ Electrolux Home Products, Inc. Electrolux Canada Corp. P.O. Box 212378 6150 McLaughlin Road Augusta, GA 30917 Mississauga, Ontario L5R 4C2 Or,O, Ou Visit Frigidaire’s Web Site At: Visite la página de Frigidaire en Internet: Visitez le site Internet de Frigidaire au : http:
