ページ1に含まれる内容の要旨
IMPORTANT MANUAL Do Not Throw Away
03076
OPERATOR'S MANUAL
WARNING:
MODEL:
Read this Man u al and follow all Warnings
and Safety Instructions. Fail ure to do so can
re sult in serious in ju ry.
PB22H54BF
LAWN TRACTOR
ALWAYS WEAR EYE PROTECTION DURING OPERATION
Visit our website: www.poulan-pro.com
417920 11.02.07 BM PRINTED IN THE U.S.A.
ページ2に含まれる内容の要旨
SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. WARNING: In order to prevent ac- • Slow down before turning. ci den tal starting when setting up, • Never leave a running machine unattended. Always trans port ing, ad just ing or making re- turn off blades, set parking brake, stop engine, and pair
ページ3に含まれる内容の要旨
SAFETY RULES Safe Operation Practices for Ride-On Mowers III. CHILDREN • If fuel is spilled on clothing, change clothing im- mediately. Tragic accidents can occur if the operator is not alert to • Never overfill fuel tank. Replace gas cap and tighten the presence of children. Children are often attracted securely. to the ma chine and the mowing activity. Never assume GENERAL SERVICE that children will remain where you last saw them. • Keep children out of the mowing area and in the • Neve
ページ4に含まれる内容の要旨
PRODUCT SPECIFICATIONS CUSTOMER RESPONSIBILITIES • Read and observe the safety rules. Gasoline Capacity 4 Gallons and type: Unleaded Regular • Follow a regular schedule in maintaining, caring for and using your tractor. Oil Type (API-SG-SL): SAE 30 (above 32°F) SAE 5W-30 (below 32°F) • Follow the instructions under “Maintenance” and “Stor age” sec tions of this own er’s manual. Oil Capacity: W/ Filter: 64 oz W/O Filter: 60 oz Spark Plug: Champion QC12YC (Gap: .040") WARNING:
ページ5に含まれる内容の要旨
UNASSEMBLED PARTS Mower Mower Front Wheel (5) Large Retainer Springs - 7/16 (1) 3/4 O.D. Washers (1) Wheel (1) 1-1/4 O.D. Washer (2) Smaller Retainer Springs - 5/16 (5) 1-3/16 O.D. Washers (1) Locknut (1) Shoulder Bolt 3/8-16 (1) Anti-Sway Bar Slope Sheet (1) Oil Drain Tube For Future Use Keys (1) Front Link Assembly (2) Rear Lift Link Assemblies (2) Keys ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. When righ
ページ6に含まれる内容の要旨
ASSEMBLY A FIG. 3 INSTALL MOWER AND DRIVE BELT FIG. 2 NOTE: You may now roll or drive your tractor off the (See Figs. 4-12) skid. Follow the ap pro pri ate instruction below to remove See MOWER AND DRIVE BELT ASSEMBL Y Supplement the tractor from the skid. Sheet for additional guidance on this assembly. W ARNING: Before start ing, read, un der stand and Be sure tractor is on level surface and engage park- fol low all in struc tions in the Op er a tion section of this ing brake. man u
ページ7に含まれる内容の要旨
ASSEMBLY NOTE: Be sure mower side suspension arms (A) are • ATTACH MOWER SIDE SUSPENSION ARMS (A) pointing forward before sliding mower under tractor. TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer • Slide mower under tractor until it is centered under and retainer spring. tractor. • Repeat on opposite side of tractor. • FIRST INSTALL ANTI-SWAY BAR (S). - From right side of mower, insert anti-sway bar into hole in transmission bracket
ページ8に含まれる内容の要旨
ASSEMBLY • Turn steering wheel to position wheels straight CHECK FOR PROPER POSITION OF ALL forward. BELTS • ATTACH FRONT LINK (E) - Work from left side of See the figures that are shown for replacing motion tractor. Insert rod end of link assembly through and mower blade drive belts in the Service and Adjust- front hole in tractor front suspension bracket (F) ments sec tion of this manual. Verify that the belts are and secure with7/16 retainer spring (G) through routed cor rect ly. hol
ページ9に含まれる内容の要旨
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. FAST SLOW REVERSE NEUTRAL HIGH LOW CHOKE IGNITION SWITCH ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT MOWER LIFT ENGINE OFF REVERSE OPERATION SYSTEM (ROS) CLUTCH/BRAKE LIGHTS ON BATTERY CRUISE CONTROL FUEL REVERSE FORWARD PEDAL 15 15 ATTACHMENT DANGER, KEEP HANDS ATTACHMENT SLOPE HAZARDS KEEP AREA CLEAR CLUTCH DISENGAGED CLUTCH ENGAGED AND FEET AWAY (SEE SAFET
ページ10に含まれる内容の要旨
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad- just ments. Save this manual for future reference. G E P D H K L N B J F C A M FIG. 13 Our tractors conform to the applicable safety standards of the American National Standards Institute. (A) ATTACHMENT LIFT LEVER – Used to raise and lower (H) LIGHT SWITCH – Turns the headlights o
ページ11に含まれる内容の要旨
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide vision safety mask worn over spectacles. IMPORTANT : Leaving the ignition switch in any position HOW TO USE YOUR TRAC TOR other than "STOP" will cause the battery to discharge and go dead. TO S
ページ12に含まれる内容の要旨
OPERATION TO ADJUST GAUGE WHEELS (See Fig. 19) Gauge wheels are prop er ly ad just ed when they are J slight ly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. K NOTE: Adjust gauge wheels with tractor on a flat level surface. L • Adjust mower to desired cutting height (See “TO AD JUST MOWER CUT TING HEIGHT” in this sec tion FIG. 17 of manual). TO USE
ページ13に含まれる内容の要旨
OPERATION • To restart movement, slowly release parking brake and brake pedal. • Slowly depress appropriate drive pedal to slowest set ting. S • Make all turns slowly. TO TRANSPORT (See Figs. 13 and 21) When pushing or towing your tractor, be sure to dis- engage transmission by placing freewheel control in free wheel ing po si tion. Free wheel control is located at the rear drawbar of tractor. FIG. 20 • Raise attachment lift to highest position with at- tach ment lift control. REVERSE OP
ページ14に含まれる内容の要旨
OPERATION BEFORE STARTING THE ENGINE NOTE: Before starting, read the warm and cold starting procedures below. CHECK ENGINE OIL LEVEL • Insert key into ignition and turn key clockwise to The engine in your tractor has been shipped, from the “START” position and release key as soon as engine factory, already filled with sum mer weight oil. starts. Do not run starter continuously for more than • Check engine oil with tractor on level ground. fifteen sec onds per minute. If the engine does
ページ15に含まれる内容の要旨
OPERATION • Disengage transmission by placing freewheel con- trol in freewheeling position (See “TO TRANSPORT” in this section of manual). • Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. Dis en gage parking brake • Depress forward drive pedal to full forward posi- tion, hold for five (5) seconds and release pedal. Depress reverse drive pedal to full reverse position, hold for five (5) seconds and release pedal. Repeat this p
ページ16に含まれる内容の要旨
maint_sch-tractore.ROS.e MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE EACH 8 25 50 100 SEASON STORAGE SCHEDULE USE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure T Check Operator Presence & ROS Systems R Check for Loose Fasteners A Check/Replace Mower Blades 3 C T Lubrication Chart 0 Check Battery Level 4 R Clean Battery and Terminals Check Transaxle Cooling Check Mower Levelness Check V-Belts Check Engine Oil Level Change Engine Oil (with oil filter) 1
ページ17に含まれる内容の要旨
02544 MAINTENANCE BLADE CARE TRACTOR For best results mower blades must be sharp. Re place Always observe safety rules when per form ing any worn, bent or damaged blades. main te nance. CAUTION: Use only a replacement BRAKE OPERATION blade approved by the manufacturer of If tractor requires more than five (5) feet to stop at your tractor. Using a blade not approved highest speed in high est gear on a level, dry concrete by the manufacturer of your tractor is or paved surface, then brak
ページ18に含まれる内容の要旨
MAINTENANCE TO CHANGE ENGINE OIL (See Figs. 24 and 25) • Rinse the battery with plain water and dry. • Clean terminals and battery cable ends with wire Determine temperature range expected before oil brush until bright. change. All oil must meet API service classification SG-SL. • Coat terminals with grease or petroleum jelly. • Be sure tractor is on level surface. • Reinstall battery (See “REPLACING BATTERY" in the SERVICE AND ADJUSTMENTS section of this • Oil will drain more freely when
ページ19に含まれる内容の要旨
MAINTENANCE ENGINE OIL FILTER CLAMP Replace the engine oil filter every season or every CLAMP other oil change if the tractor is used more than 100 hours in one year. MUFFLER FUEL FILTER Inspect and replace corroded muffler and spark ar- FIG. 26 rester (if equipped) as it could create a fire hazard and/or damage. CLEANING SPARK PLUGS • Clean engine, battery, seat, finish, etc. of all foreign Replace spark plugs at the beginning of each mowing matter. season or after every 100 hours of op
ページ20に含まれる内容の要旨
SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST - MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and remove key. • Make sure the blades and all moving parts have completely stopped. • Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TRACTOR (See Fig. 27) • From right side of mower, disconnect anti-
