Land Pride Razor Harness Update Kit 356-142Aの取扱説明書

ページ1に含まれる内容の要旨

Wiring Harness Update Kit
Assembly Instructions
Manual No. 356-141M
Razor Series ZR44 & ZR52
Before You Start Instructions For Kit No 356-142A
When you see this symbol, the subsequent A detailed listing of parts for wiring harness update kit
instructions and warnings are serious - follow
No. 356-142A is provided on page 4. Use this list as a
!
without exception. Your life and the lives of
checklist to inventory parts received.
others depend on it!
1. Park mower on a flat surface and move control

ページ2に含まれる内容の要旨

Land Pride Instructions For Kit No 356-142A Refer to Figure 3: 10. Insert terminal removal tool or small thin bladed screw driver into backside (see Figure 5) of a purple 6. Locate main wiring harness attached to the mower wire connector slot. Push in on the purple wire and frame. Cut plastic ties securing harness in place. press down on the holding tab. See Figure 6 below for view of holding tab. Once the tab has released, Mower Frame pull purple ground wire out. If the terminal does not releas

ページ3に含まれる内容の要旨

Land Pride Instructions For Kit No 356-142A Refer to Figure 8: 14. Crimp Butt Connector with crimping part of wire strippers to secure connector place. Butt Connector Main Wiring Harness Orange Crimp Portion of Wire the Wire Strippers Butt Connector Splice Main Wire Connector harness 24594 Crimping Butt connector Bare Wire End of New Figure 8 Splice Wire Refer to Figure 9: 15. Plug the new splice wire spade terminals into the Metal Splice terminal slots where the purple ground wires were Prong C

ページ4に含まれる内容の要旨

Razor Harness Update Kit Part No. 356-142A Qty. Part No. Part Description 1 356-141M INSTRUCTION,HONDA ELEC UPDATE 2 800-112C CABLE TIE .19X7.25 1.75D 50LB 1 833-401C HARNESS UPDATE WIRE Kit 1 833-381C BUTT CONNECTOR (Included with 833-401C Kit) 1 833-460C CONNECTOR SPLICE 16-14AWG (Included with 833-401C Kit) Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com