ページ1に含まれる内容の要旨
Operator'smanual
WH4817E/968999238
WH3615E/968999237
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
English
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
OPERATOR’S MANUAL MOWER WH3615E WH4817E Maintenance ........................................................ 34 Contents Maintenance Schedule...................................... 34 Contents.................................................................. 1 Ignition System.................................................. 36 Introduction ............................................................ 3 Checking the Safety System ............................. 37 Congratulations....................
ページ4に含まれる内容の要旨
WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance. WARNING! Engine exhaust, some of its constituents, and certain vehicle componets contain or emit chemicals
ページ5に含まれる内容の要旨
INTRODUCTION Introduction Congratulations Thank you for purchasing a Husqvarna Walk-Behind Mower. This machine is built for the greatest efficiency and rapid mowing primarily of large areas. Controls in one place and a transmission regulated by steering controls contribute to the machine’s performance. This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) can considerably increase the lifespan of your machine and even increase its resale value. If you s
ページ6に含まれる内容の要旨
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the follo
ページ7に含まれる内容の要旨
SYMBOLS AND DECALS Symbols and Decals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxxxxx xxxx xxxxxxxx xxx x Xxxxx xxxxxx xx. xx xxxxxxxx xxxxx xxx xx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx xx. Used in this publication to n
ページ8に含まれる内容の要旨
SYMBOLS AND DECALS Keep a safe Severing of distance from fingers & toes. the machine. Moving sharp blades Read Rotating under cover. Operator´s blades. Manual. Whole body Shut off engine exposure to & remove key thrown before objects. performing any maintenance or repair work. English-6
ページ9に含まれる内容の要旨
SAFETY INSTRUCTIONS Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. General Use Read all instructions in this operator’s manual and on the machine before starting it. Ensure that you understand them and then abide by them. Learn how to use the machine and its controls safely and learn how to stop quickly. Also learn to recognize the safety decals. O
ページ10に含まれる内容の要旨
SAFETY INSTRUCTIONS Shut down the blades when not mowing. WARNING! Be careful when turning around fixed Engine exhaust and certain objects, so that the blades do not hit vehicle components contain them. Never drive over foreign objects. or emit chemicals considered Only use the machine in daylight or in to cause cancer, birth defects, other well-lit conditions. Keep the or other reproductive system machine a safe distance from holes or damage. The engine exhaust other irregularities. Pay a
ページ11に含まれる内容の要旨
SAFETY INSTRUCTIONS Driving on Slopes Driving on slopes is one of the operations where the risk is greatest that the driver will lose control or the machine will tip over, which can result in serious injury or death. All slopes require extra caution. If you cannot reverse up a slope or if you feel unsure, do not mow the slope. Do as follows Remove obstacles such as stones, tree branches, etc. Watch out for and avoid driving over furrows, holes, and bumps. On uneven terrain, the machine can t
ページ12に含まれる内容の要旨
SAFETY INSTRUCTIONS Children Serious accidents may occur if you fail to be on guard for children in the vicinity of the machine. Children are often attracted to the machine and mowing work. Never assume that children will stay put where you last saw them. Keepchildrenawayfromthe mowing area and under close supervision by another adult. Keep an eye out and shut off the machine if children enter the work area. 8011-636 Before and during a reversing maneuver, Never allow children to operate
ページ13に含まれる内容の要旨
SAFETY INSTRUCTIONS Maintenance WARNING! The engine must not be started when the protective plate for the mower deck’s drive belt is removed. Stop the engine. Prevent the engine from starting by removing the spark plug cables from the spark plugs or by removing the ignition key before making any adjustments or performing maintenance. Never fill the fuel tank indoors. Fuel and fuel fumes are poisonous and extremely flammable. Be especially cautious when handling fuel, as carelessness can re
ページ14に含まれる内容の要旨
SAFETY INSTRUCTIONS Do not modify safety equipment. Check regularly to be sure it works properly. Use protective glasses at The machine must not be driven with maintenance work. defective or unmounted protective plates, protective cowlings, safety switches, or other protective devices. Do not change the settings of governors and avoid running the engine with overly high engine speeds. If you run the engine too fast, you risk damaging the machine components. Never use the machine indoors or
ページ15に含まれる内容の要旨
SAFETY INSTRUCTIONS Transport The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer. Use an approved trailer to transport the machine. Activate the parking brake, turn IMPORTANT INFORMATION off the fuel supply, and fasten the The parking brake is not sufficient to lock machine with approved fastening the machine in place during transport. devices, such as bands, chains, or Ensure that the machine is well fas
ページ16に含まれる内容の要旨
CONTROLS Controls This operator’s manual describes the Husqvarna Walk-Behind Mowers WH3615E and WH4817E. The machines are fitted with a Kawasaki four-stroke V-Twin engine, see Technical Data on page 56. Transmission from the engine is made via two IZT gears, one for each wheel. 8011-433 Walk behind mower 8011-676 Locations of the controls Control Locations Page Page 1. Recoil starter grip 15. 8. Blade engagement switch 18. 2. Ground speed lever 15. 9. Neutral bail 19. 3. Motion control leve
ページ17に含まれる内容の要旨
CONTROLS 1. Recoil Starter Grip IMPORTANT INFORMATION Do not let recoil cord snap back by itself. This may damage the cord or the recoil starter assembly. Pull the recoil starter grip slowly until you feel compression, then pull it briskly. Normally this engine will not backfire. If you 8011-435 get backfires, contact your Husqvarna dealer Recoil starter grip for service. 2. Ground Speed Lever Located in the center of the console. Controls the forward speed of the mower. Push the lever fo
ページ18に含まれる内容の要旨
CONTROLS 3. Motion control levers The machine’s speed and direction are continuously variable using the two motion control levers. When both controls are in the neutral position, the machine stands still. The controls can be locked in neutral position by the Neutral bail By moving both controls an equal amount the machine moves in a straight line forward. WARNING! The machine can turn very 8011-663 Motion control lever rapidly if one steering control is moved much further than the other
ページ19に含まれる内容の要旨
CONTROLS 5. Operator Presence Lever Located on the handle. As an additional safety feature, these mowers are equipped with an Operators Presence System. This is an electrical interlock safety system which is activated by depressing either one or both of the Operator Presence Levers at the handle grips. Releasing both Operators Presence Levers while mowing or transporting will break the electrical circuit and cause the engine and mower to stop. The mower will not stop immediately after
ページ20に含まれる内容の要旨
CONTROLS 7. Brake/Bypass Lever Located at the back of the rear deck. Used to apply park brake or bypass the IZT gears for free wheel (neutral) condition. 8011-411 Brake/Bypass lever The functions for the lever is: 1. Drive, used when operating the machine. 2. Parking, parking brake applied. 3. Bypass, used when moving the machine by hand. Parking Brake The parking brake on IZT machines is applied when the Brake/Bypass lever is set in position 2. The parking brake must only be 8011-643 used
