ページ1に含まれる内容の要旨
Operators Manual Models:
968999214 / BZ6134D
968999216 / BZ7234D
968999218 / BZ6127D
Please read these instructions carefully and make
sure you understand them before using the machine.
MANUAL NO. 539106394 REV. 01 (06/10/03)
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
OPERATOR’S MANUAL Contents Contents...................................................................1 Checking the Engine's Cooling Air Intake ......... 31 Introduction .............................................................3 Checking & Adjusting Throttle Cable ................ 31 Congratulations....................................................3 Clutch Service & Maintenance .......................... 31 General ................................................................3 Replacin
ページ4に含まれる内容の要旨
2
ページ5に含まれる内容の要旨
INTRODUCTION Introduction Congratulations Thank you for purchasing a Husqvarna ride-on mower. This machine is built for the greatest efficiency and rapid mowing of large areas. Conveniant controls and a hydrostatic transmission regulated by steering levers also contribute to the machine’s performance. This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) can considerably increase the lifespan of your machine and even increase its resale value. If you
ページ6に含まれる内容の要旨
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the f
ページ7に含まれる内容の要旨
SYMBOLS AND DECALS Symbols and Decals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxxxxx xxxx xxxxxxxx xxx x Xxxxx xxxxxx xx. xx xxxxxxxx xxxxx xxx xx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx xx. Used in this publication to
ページ8に含まれる内容の要旨
SAFETY INSTRUCTIONS Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. General Use • Read all instructions in this operator’s manual and on the machine before starting it. Ensure that you understand them and then abide by them. • Learn how to use the machine and its controls safely and learn how to stop quickly. Also learn to recognize the safety deca
ページ9に含まれる内容の要旨
SAFETY INSTRUCTIONS • Be careful when rounding fixed objects, so that the blades do not hit them. Never WARNING! drive over foreign objects. Engine exhaust and certain vehicle components contain • Only use the machine in daylight or in or emit chemicals considered other well-lit conditions. Keep the to cause cancer, birth defects, machine a safe distance from holes or or other reproductive system other irregularities in the ground. Pay damage. The engine exhaust attention to other po
ページ10に含まれる内容の要旨
SAFETY INSTRUCTIONS Driving on Slopes Driving on slopes is one of the operations where the risk is greatest that the driver will lose control or the machine will tip over, which can result in serious injury or death. All slopes require extra caution. If you cannot reverse up a slope or if you feel unsure, do not mow the slope. Do as follows • Remove obstacles such as stones, tree branches, etc. • Mow up and down, not side-to-side. • Never drive the rider on terrain that slopes more than
ページ11に含まれる内容の要旨
SAFETY INSTRUCTIONS Children • Serious accidents may occur if you fail to be on guard for children in the vicinity of the machine. Children are often attracted to the machine and mowing work. Never assume that children will stay put where you last saw them. • Keep children away from the mowing area and under close supervision by another adult. • Keep an eye out and shut off the machine if children enter the work area. • Before and during a reversing maneuver, look backward and downward
ページ12に含まれる内容の要旨
SAFETY INSTRUCTIONS • Allow the engine to cool before refueling. Do not smoke. Do not fill fuel in the vicinity of sparks or open flames. • If leaks arise in the fuel system, the engine must not be started until the problem has been resolved. • Store the machine and fuel in such a way that there is no risk of leaking fuel or fuel vapor leading to damages. • Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may other
ページ13に含まれる内容の要旨
SAFETY INSTRUCTIONS • Never use the machine indoors or in spaces lacking proper ventilation. The exhaust fumes contain carbon monoxide, an odorless, poisonous, and lethal gas. • Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting. • Never make adjustments with the engine running. • The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer. • The blades are sharp and can cause
ページ14に含まれる内容の要旨
CONTROLS Presentation This operator’s manual describes the Husqvarna Lever-Steered Rider Mower. The mower is fitted with a liquid cooled, 3 cylinder Daihatsu diesel engine (27 HP) or Daihatsu Turbo diesel engine (34 HP). Transmission from the engine is made via two belt-driven hydraulic pumps, which in turn drive a hydraulic motor for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed. BAM-1 Lever-Steered Rider 4 14 15
ページ15に含まれる内容の要旨
CONTROLS Gauges Water temperature gauge- indicates coolant temperature and warns of overheat situation. Ammeter - indicates amount of electrical flow at the battery. Under normal operating conditions the needle will be slightly on the plus (+) side of the gauge, showing that current is being supplied to the battery. At idle speed, the indicator may be at zero or on the AMMETER negative (-) side. A continuous negative OIL PRESSURE reading at normal operating speed indicates WATER TEMPERA
ページ16に含まれる内容の要旨
CONTROLS Engaging the Mower Deck In order to engage the mower deck, pull the knob out; the mower deck is disengaged when the knob is depressed. Deck should be engaged at mid throttle and disengaged at idle speed to prolong clutch life. BAM-2 Engaging the mower deck Parking Brake The parking brake is found on the left of the machine. Pull the lever back to activate the brake and push forward to release it. BAM-4 Parking brake not activated Seat Adjustment Located on the left side of the se
ページ17に含まれる内容の要旨
CONTROLS Motion Control Levers The machine’s speed and direction are continuously variable using the two motion control levers. The motion control levers can be moved forward or backward from a neutral position. Furthermore, there is a neutral position, which is locked if the motion control levers are moved outward into the neutral slots. When both controls are in the neutral position (N), the machine stands still. The motion control levers on each side of the BAM-6 Motion Control Lever
ページ18に含まれる内容の要旨
CONTROLS If the steering controls are in uneven positions when standing still, they can be adjusted using the adjustment screws, not the link system, for the controls BAM-7 Adjusting screws Hydraulic Lift Switch Used to raise and lower the mower deck hydraulically. Only used on units with power deck lifts. Push switch forward to lower the deck and pull backward to raise the deck. BAM-2 Hydraulic lift switch 16
ページ19に含まれる内容の要旨
CONTROLS Refueling The machine has two fuel tanks, one on each side just behind the seat. The tanks hold 11.4 gallons, 5.7 gallons each. The engine is run on clean, fresh, diesel fuel with a minumum of 40 cetane. . WARNING! Diesel fuel is highly flammable. Observe caution BAM-8 Fuel Tanks and fill the tank outdoors (see the safety rules). Fuel Shut-Off The fuel shut-off is placed to the right side of the seat. The shut-off has three positions; right tank, left tank and off position. Fuse
ページ20に含まれる内容の要旨
CONTROLS Manual Lifting Lever with Foot Assist for the Mower Deck The lifting lever is used to place the mower deck in the transport position or one of the 17 different cutting height positions. The cutting height is set by placing a pin in the hole for the desired cutting height and the pin is then locked on the inside (hidden in the illustration) with the supplied cotter pin. 1. Pull the lever backward while pushing on the foot pedal, lifting the deck to the locked position. The deck
