ページ1に含まれる内容の要旨
Operator´s manual
Rider 11 Rider 11 C Rider 13 C
Rider 13 AWD Rider 15 C
Please read these instructions carefully and make sure
you understand them before using the machine. English
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
CONTENTS Operator’s Manual for Rider 11, Rider 11 C, Rider 13 C, Rider 13 AWD and Rider 15 C Cleaning ......................................................... 24 Introduction ......................................................... 2 Dismantling of the machine hoods ................. 25 Driving and transport on public roads .............. 2 Inspecting the silencer ................................... 26 Towing .............................................................. 2 Checking and adjusti
ページ4に含まれる内容の要旨
INTRODUCTION Dear customer Thank you for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a front- mounted cutting unit and a patented rear-wheel steering system. Riders are designed for maximum efficiency even in small or confined areas. The closely grouped controls and pedal-operated hydrostatic transmission (certain models) also contribute to the performance of this machine. We hope you will find this operator’s manual very useful. By following its instructions (
ページ5に含まれる内容の要旨
INTRODUCTION Good service Husqvarna products are sold all over the world and only through servicing dealers. This is to ensure that you, the customer, get the best support and service. Before the machine is delivered it undergoes inspection and is adjusted by your dealer. When you need spare parts or advice on service issues, warranty terms, etc., contact: Engine Transmission This Operator’s Manual belongs to machine with serial number: Serial number The serial number can be found on the printe
ページ6に含まれる内容の要旨
EXPLANATION OF SYMBOLS These symbols are on the machine and in the operator’s manual. Study them carefully so that you know what they mean. Read the operator’s manual N R Reverse Neutral Fast Slow Engine off Battery Choke Fuel Oil pressure Cutting height Backwards Forwards Ignition Hydrostatic free wheel Clutch out Parking brake Brake Clutch Warning Use hearing protection Clutch in Noise emission to surround- Warning! Rotating blades. Warning! Risk that the Never drive across CE conformity ma
ページ7に含まれる内容の要旨
SAFETY INSTRUCTIONS Safety instructions These instructions are for your safety. Read them carefully. WARNING! The inserted symbol means that important safety instructions need to be observed. It applies to your safety. General use • Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them. • Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety d
ページ8に含まれる内容の要旨
SAFETY INSTRUCTIONS • Take care when rounding a fixed object, so that WARNING! the blades do not hit it. Never run the machine Engine exhaust, some of its over foreign objects. constituents and certain vehicle • Only use the machine in daylight or in other components contain or emit chemicals considered to cause well-lit conditions. Keep the machine at a safe cancer, birth defects or other distance from holes or other irregularities in the reproductive impairment. The ground. Pay attention to ot
ページ9に含まれる内容の要旨
SAFETY INSTRUCTIONS Driving on slopes Driving on slopes is one of the operations where the risk of the driver losing control of the machine or of it overturning is the greatest; this can result in serious injury or death. All slopes demand extra care. If you cannot reverse up a slope or if you feel unsure, do not mow it. Proceed as follows: • Remove obstacles such as stones, branches, etc. • Mow upwards and downwards, not sideways. • Do not use the machine on ground that slopes 6003-004 more tha
ページ10に含まれる内容の要旨
SAFETY INSTRUCTIONS Children • Serious accidents may occur if you fail to be on your guard for children in the vicinity of the machine. Children are often attracted to the machine and mowing. Never assume that children will remain where you last saw them. • Keep children away from the area to be mowed and under close supervision by another adult. • Keep an eye out and shut off the machine if children enter the work area. • Before and during reversing procedures, look behind you and down for smal
ページ11に含まれる内容の要旨
SAFETY INSTRUCTIONS • If leaks arise in the fuel system, the engine must WARNING! not be started until the problem has been The engine and the exhaust resolved. system become very hot during operation. • Store the machine and fuel in such a way that Risk of burn injuries if touched. there is no risk that leaking fuel or fumes can cause any damage. • Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fu
ページ12に含まれる内容の要旨
SAFETY INSTRUCTIONS • Never use the machine indoors or in spaces lacking proper ventilation. Exhaust fumes con- tain carbon monoxide, an odourless, poisonous and highly dangerous gas. • Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting. • Never make adjustments with the engine running. • The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer. • The blades are sharp and can cause c
ページ13に含まれる内容の要旨
PRESENTATION Presentation On the Rider 13 C, Rider 13 AWD and Rider 15 C Congratulation on your choice of a first-class quality the power transmission from the engine is handled product. by a hydrostatic gearbox which enables stepless Four models equipped with engines from Briggs & variation of the speed. Stratton are described in this operator’s manual. Rider 13 AWD also features all wheel drive. Rider 11 and Rider 11 C has an in-line gearbox with five forward gears and one reverse gear. 6004-0
ページ14に含まれる内容の要旨
PRESENTATION RIDER 11, 11 C Throttle and Choke lever The engine speed is adjusted with the throttle control, and thereby also the rotation speed of the blades. The control is also used to activate the choke function. When the choke is used the engine receives a richer mixture of fuel and air, which simplifies cold start. 6004-004 Clutch pedal The clutch pedal disengages the engine and stops forward movement. The blades are not affected by the clutch pedal. 6004-005 Brake pedal / Parking brake T
ページ15に含まれる内容の要旨
PRESENTATION RIDER 13 C, 13 AWD, 15 C Throttle and Choke lever The engine speed is adjusted with the throttle control, and thereby also the rotation speed of the blades. The control is also used to activate the choke function. When the choke is used the engine receives a richer mixture of fuel and air, which simplifies cold start. 6004-004H Speed limiter The speed of the machine is steplessly regulated with two pedals. Pedal (1) is used to drive forwards and pedal (2) for reversing. WARNING! Mak
ページ16に含まれる内容の要旨
PRESENTATION Cutting unit Rider 11 has a cutting unit with rear ejection, i.e. the grass cuttings are thrown out behind the cutting unit. 6004-009Hy Rider 11 C, Rider 13 C, Rider 13 AWD and Rider 15 C have a 3-blade BioClip cutting unit. 6021-003 Lift lever for cutting unit The lift lever is used to set the cutting unit in trans- port or cutting position. If the lever is pulled back the unit will lift up and the blades will automatically stop rotating (transport position). If the lock button is
ページ17に含まれる内容の要旨
PRESENTATION Lever for adjustment of cutting height With this lever the cutting height can be adjusted to 9 different positions. Cutting unit with rear ejection, 40-90 mm Combi-unit, (1 9/16" - 3 9/16") 6004-013H Seat The seat has a jointed attachment on the front edge and can be tipped forward. The seat can also be adjusted lengthways. Release the knobs under the seat and adjust it forwards or backwards to the required position. Lock the adjustment with the wheels. 6004-014 Fuelling The engine
ページ18に含まれる内容の要旨
DRIVING IMPORTANT INFORMATION The air intake grille in the engine cover behind the driver’s seat must not be blocked by, for example, clothing, leaves, grass or dirt. Impaired cooling of the engine. Risk of major engine damage. 8009-431 Before starting • Read the safety instructions and information on the location and function of the controls before starting (see pages 5-15). • Conduct daily maintenance before starting (see maintenance schedule on page 21). Adjust the seat to the required positi
ページ19に含まれる内容の要旨
DRIVING Cold engine: 4. Push the throttle control to position 3 (choke position). In this position the engine receives a 2 richer mixture so that the engine starts more 1 easily. 3 The throttle must be moved to the side (towards the ignition key) to reach the choke position. 6007-004H Warm engine: 5. Set the throttle control midway between position 1 and 2. 2 1 3 6007-005H 6. Turn the ignition key to start position. STOP START IMPORTANT INFORMATION Do not run the starter for more than about 15 s
ページ20に含まれる内容の要旨
DRIVING 7. When the engine has started release the igni- tion key to neutral position. Push the throttle control to the required speed. For cutting 3/4 to full throttle. STOP START WARNING! Never run the engine indoors, in enclosed or poorly ventilated areas. The exhaust fumes contain toxic carbon monoxide. 6007-007 To start an engine with a weak battery WARNING! Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection
