ページ1に含まれる内容の要旨
OWNER’S MANUAL
HRR216VYA
LAWN MOWER
Before operating the mower for the first time, please read this
Owner’s Manual. Even if you have operated other mowers,
take time to become familiar with how this mower works and
practice in a safe area until you build up your skills.
QUICK FIND
Air Filter.................................................. 12 Find a Dealer..........................................20 Oil Change..............................................12
Blades..........................
ページ2に含まれる内容の要旨
WARNING WELCOME The engine exhaust from this product contains chemicals known to the State of California to cause Congratulations on your selection of a Honda lawn mower! We are cancer, birth defects, or reproductive harm. certain you will be pleased with your purchase of one of the finest lawn mowers on the market. We want to help you get the best results from your new mower and to operate it safely. This manual contains Important Message to Parents information on how to do that; plea
ページ3に含まれる内容の要旨
HONDA PARTS AND CONTROLS INITIAL MOWER SETUP BLADE CONTROL LEVER (P. 8) List of Parts With help from an assistant, carefully remove the mower and loose THROTTLE LEVER (P. 8) parts from the carton and compare the loose parts against the following list. Contact the authorized Honda dealer from whom you REAR purchased the mower if any of the loose parts shown are not included DISCHARGE with your mower. GUARD (P. 5) ® ROTO-STOP BUTTON Ref. No. Description Qty. FUEL TANK CAP (P. 7) (P. 8) Gr
ページ4に含まれる内容の要旨
Add Engine Oil BEFORE EACH OPERATION The mower is shipped WITHOUT OIL in the engine. Remove the oil filler cap/dipstick Your safety is your responsibility. A little time spent in preparation will and add the entire contents of significantly reduce your risk of injury. the included bottle of oil into the Read and understand this manual. Know what the controls do and oil filler opening. how to operate them. All Honda engines are run at the Familiarize yourself with the lawn mower and its o
ページ5に含まれる内容の要旨
® Bag or Rear Discharge Clip Director Set the clip director lever in the BAG position. The Clip Director can be adjusted to either the BAG or MULCH position to achieve the desired mowing results. Adjust the Clip Director lever to PUSH AND TWIST either the bag (shutter door fully open) or mulch (shutter door fully closed). To adjust the Clip Director, push the end of the lever and twist the lever to the desired position. Release the button and allow it to snap into the groove. SHUTTER
ページ6に含まれる内容の要旨
Grass Bag Cutting Height Adjustment A lawn mower works like a vacuum cleaner; it blows air through the Each wheel of the mower can be adjusted to one of six settings. The bag fabric, which traps the grass clippings. Always empty the grass actual height of cut grass will vary with lawn and soil conditions. bag before it becomes filled to the limit of its capacity. Bagging Be sure the engine is not running when adjusting the cutting height. performance will diminish after the bag becomes about
ページ7に含まれる内容の要旨
Add Fuel OPERATION This engine is certified to operate on regular gasoline with a pump octane rating of 86 or higher. For your safety, avoid starting or operating the engine in an enclosed Never use stale or contaminated gasoline or an oil/gasoline mixture. area, such as a garage. Your mower’s exhaust contains poisonous Avoid getting dirt or water in the fuel tank. carbon monoxide gas, which can collect rapidly in an enclosed area and cause illness or death. You may use regular unleaded gas
ページ8に含まれる内容の要旨
BLADE CONTROL SMART DRIVE ADJUST CONTROL POSITION Refuel With Care Operating the Controls Gasoline is extremely flammable and gasoline vapor can explode. Refuel only outdoors, in a well-ventilated area, with the engine OFF. Throttle Lever STOP FAST Never smoke near gasoline, and keep other flames and sparks away. Always store gasoline in an approved container. For best cut quality, always mow with the throttle lever in the FAST Wear Protective Clothing position. When the blades rotate
ページ9に含まれる内容の要旨
Adjusting the Smart Drive Control SERVICING YOUR MOWER The Smart Drive control can be adjusted up or down into any one of five positions for operator comfort. Proper maintenance is essential for safe, economical, and Do not attempt to adjust the position trouble-free operation. It also helps reduce air pollution. of the Smart Drive control while the mower is in motion. WARNING Slide the multi-position adjuster to MULTI-POSITION Improper maintenance, or failure to correct a problem bef
ページ10に含まれる内容の要旨
– Injury from moving parts. Safety Precautions Do not run the engine unless instructed to do so. • Make sure the engine is off before you begin any maintenance or • Read the instructions before you begin, and make sure you have repairs. This will eliminate several potential hazards: the tools and skills required. – Carbon monoxide poisoning from engine exhaust. • To reduce the possibility of fire or explosion, be careful when Be sure there is adequate ventilation whenever you operate working
ページ11に含まれる内容の要旨
Blade Inspection Blade Replacement 1. Turn the fuel valve OFF (page 3). 1. Remove the two blade bolts with a 14 mm (6 point) socket wrench. Use a wooden block to prevent the blades from turning 2. Disconnect the spark plug cap from the spark plug (page 13). when removing the bolts. Remove the blades. 3. Tilt the mower to the right side, so the fuel cap side is up. This will help to prevent fuel leakage and hard starting due to carburetor flooding. UPPER BLADE 4. Inspect the blades for damage
ページ12に含まれる内容の要旨
ON ONDA DA Engine Oil Recommendations WOODEN BLOCK Oil is a major factor affecting performance and service life. Use 4-stroke automotive detergent oil. Always change the oil in accordance with the MAINTENANCE SCHEDULE (page 10). Recommended oil for general use: SAE 10W-30 Other viscosities shown in the chart may be used when the average 30 temperature in your area is within the TORQUE 10W-30 WRENCH recommended range. TORQUE: The SAE oil viscosity and service 020 40 60 80 100°F classific
ページ13に含まれる内容の要旨
Spark Plug Spark Arrester (optional part) Replace the spark plug every 2 years or after 150 hours of use. The spark arrester must be serviced every 100 hours to keep it functioning as designed. Recommended Spark Plug: NGK - BPR5ES Your lawn mower engine is not factory-equipped with a spark arrester. NOTICE In some areas, it is illegal to operate an engine without a spark arrester. Check local laws and regulations. An optional USDA An incorrect spark plug can cause engine damage. approved spa
ページ14に含まれる内容の要旨
Smart Drive Cable Check/Adjustment TRANSPORTING Cable Check With the engine off, use the If the engine has been running, allow it to cool before loading the multi-position adjuster to set the mower on the transport vehicle. A hot engine and exhaust system can Smart Drive control in its lowest burn you and can ignite some materials. position (page 9). Turn the fuel valve to the OFF position. This will prevent carburetor Gradually push the Smart Drive flooding and reduce the possibility o
ページ15に含まれる内容の要旨
Cleaning Handlebar Remove the grass bag if installed. You can place it on top of the Mower Deck engine with the bag opening to the front. . Before washing the underside of the mower deck, stop the engine and turn the fuel valve to the OFF position. Rest the mower on its right side, so the fuel cap side is up. This will help to prevent fuel leakage and hard starting due to carburetor flooding. Wear heavy gloves to protect your hands from the blades. Be careful to avoid getting water int
ページ16に含まれる内容の要旨
Loss of Power TECHNICAL INFORMATION Possible Cause Correction Throttle not set to FAST Move the throttle lever to FAST Serial Number Locations (page 7). Grass is too tall Raise the cutting height (page 6), cut MEETS CPSC BLADE SAFETY a narrower swath, use a slower REQUIREMENTS. CONFORMS TO ANSI B 71.1 SAFETY STANDARD ground speed, or cut more frequently. HRR2169VYA XX MZCG –– XXXXXXX Instead of mulching, try rear AMERICAN HONDA AMERICAN HONDA MOT MOTOR CO., INC. OR CO., INC
ページ17に含まれる内容の要旨
Emission Control System Air Index An Air Index Information hang tag/label is applied to engines certified Source of Emissions to an emission durability time period in accordance with the The combustion process produces carbon monoxide, oxides of requirements of the California Air Resources Board. nitrogen, and hydrocarbons. Control of hydrocarbons and oxides of The bar graph is intended to provide you, our customer, the ability to nitrogen is very important because, under certain conditions,
ページ18に含まれる内容の要旨
Maintenance Specifications Fuel Unleaded gasoline with a pump page 7 Mower Features octane rating of 86 or higher containing no more than 10% ethanol by volume HRR216K9VYA Honda rotary mower, 21-inch mower deck, 3-in-1 Clip Director, Smart Drive variable Capacity: 0.25 US gal (0.93 L) speed transmission, Roto-Stop blade brake See “FUEL SYSTEM MAINTENANCE” clutch, Auto Choke System™ on page 19 to prevent fuel-related problems Dimensions and Weights Blade Bolt 36 ~ 43 ft-lb (49 ~ 59 N•m) pa
ページ19に含まれる内容の要旨
FUEL SYSTEM MAINTENANCE When maintained properly, your Honda lawn mower should provide years of trouble-free operation. This includes the fuel system. However, gasoline can quickly deteriorate, causing starting or running problems and, in some cases, damage to the fuel system. Most fuel-related problems can be avoided by following the precautions listed below. Fuel system damage and engine performance problems resulting from deteriorated fuel are not covered by the Distributor’s Limited Warra
ページ20に含まれる内容の要旨
Dealer Locator Information CUSTOMER INFORMATION To find an Authorized Honda Servicing Dealer anywhere in the United States: Visit www.powerequipment.honda.com and click on Find a Dealer. Parts, Accessories, and Service Items Contact an authorized Honda servicing dealer to purchase any of How to Contact Honda these (or other) Honda Genuine items for your lawn mower. Honda Power Equipment dealership personnel are trained professionals. They should be able to answer any question you may Replace
