ページ1に含まれる内容の要旨
MODEL 6006
OPERATOR'S MANUAL
ASSOCIATE
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for the battery charger you have
purchased. You may need to refer to these instructions at a later date.
2. CAUTION. To reduce risk of injury, charge only wet cell, lead-acid, automotive type rechargeable batteries. Other types of batteries may burst
causing personal injury and property damage.
3. Do not expose the charger
ページ2に含まれる内容の要旨
16. DC CONNECTION PRECAUTIONS a. Connect and disconnect the DC output clamps only after setting the charger switches to the OFF position and removing the AC cord from the electric outlet. Never allow the clamps to touch each other. b. Attach the DC clamps to the battery post and twist or rock back and forth several times to make a good connection. This tends to keep the clamps from slipping off the terminals and helps to reduce the risk of sparking. 17. FOLLOW THESE STEPS WHEN THE BATTE
ページ3に含まれる内容の要旨
20. NOTE: SIDE TERMINAL TO BE USED IN POSITIVE CLAMP ONLY! For instructions for NEGATIVE clamp attachment refer to section 17e or 17f. Storage position Extended position Thrust on terminal Will not get lost. Always ready to use. Note: Pressure, when handle is squeezed, Note: Clamp is released and spring holds adapter firm. Will not slip back. tension holds adapter firm. 21. LENGTH OF CHARGE a. Test the battery for state of charge. Do not charge if it is over 75% charged or the ba
ページ4に含まれる内容の要旨
12V CRANKING ASSIST Turn off all the lights and accessories in the stalled vehicle. Connect the charger to the battery per previous instructions. Set the CHARGE VOLTAGE switch to the 12HI position. Charge the battery on 12HI for at least five minutes. Make sure the battery is accepting current before setting charger to 12V START. Set the switch in the 12V START position. Start the vehicle with the charger connected to the battery. NOTE: Do not crank the engine more than 20 seconds in any
ページ5に含まれる内容の要旨
WIRING DIAGRAM MODEL 6006 PARTS LIST Item Description Part No. 1 Front leg ................................................... 605671 2 Wheels w/nuts .......................................... 605672 3 Axle w/nuts ............................................... 610052 4 Transformer .............................................. 610862 5 Rectifier .................................................... 610850 6 Fan Blade ................................................. 610189 7 Fan
ページ6に含まれる内容の要旨
027-0521E.doc illustration list 6006 English Fig FILE NAME DESCRIPTION 1 LOGO.EPS ASSOCIATED LOGO 2 EXTERNAL_BATTERY.WPG BATTERY W/CABLE EXTENSION 3 PLUG-ENG.PLT GROUNDING ADAPTER -ENGLISH 4 SIDETERM.TIF SIDE TERMINAL ADAPTER 5 ENGLSTBL.PLT CHARGE RATE TABLE - ENGLISH 6 27-385A.CXD ASSEMBLY DRAWING 7 27-521WE.CXD WIRING DIAGRAM 8 27-800-2.CXD PARTS LIST EXPLODED ASSEMBLY REVISION RECORD 10/05 Pg. 2: added external battery drawing. Pg. 3: removed axle washer from assemb
